Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterChain Link Fence Cost Per Foot in Los Angeles: Three Price Tiers, Not One
Chain link fence cost per foot in Los Angeles runs from about $14 to $26 per linear foot installed for a standard residential boundary fence, $22 to $38 per foot for commercial-grade Valley industrial work, and $28 to $52 per foot for hillside slope-stabilization and post-fire erosion-barrier fencing. Most projects land between $4,130 and $10,620 total. The dollars swing that wide because chain-link in LA isn’t one product – it’s three different jobs with different posts, different gauges and different permit paths. Call (888) 427-1733 and we’ll tell you which tier your property falls into before anyone shows up.
Why LA Chain-Link Isn’t Just Schoolyards and Storage Yards
After the 2018 Woolsey and 2020 Bobcat fires, thousands of slope-adjacent homeowners needed erosion-barrier fencing in a hurry. Chain-link became the default material for that work, and not because it was cheap. Its open weave lets water and fine debris pass through instead of damming up behind a solid panel and failing under hydrostatic pressure. Vinyl and wood can’t do that. A fence that holds back a debris flow becomes the debris flow when the next storm hits.
That reality runs headlong into LA’s seismic and fire-zone rules, which already govern nearly every remodel and addition here. On fire-scarred hillsides, fencing stops being a cosmetic boundary and becomes part of the drainage and slope story. If you’re on a slope above a house, it’s a safety system.
So the $20-per-foot average you’ll read in national guides is a starting reference, not a quote. Here’s how the three tiers actually break down.
Los Angeles Chain-Link Cost Tiers by Application
| Application | Spec | Cost per linear foot |
|---|---|---|
| Residential boundary fence (flat-lot basin neighborhoods like Reseda, Northridge, Canoga Park) | 11.5-gauge galvanized, 4-foot height, standard posts | $14-$26 |
| Commercial / industrial boundary (Valley industrial corridors) | 9-gauge, 6-foot height, heavier line posts | $22-$38 |
| Hillside slope stabilization / post-fire erosion barrier | Driven posts, tension wire reinforcement | $28-$52 |
| Coastal upgrade (Santa Monica, Playa del Rey, Venice) | Vinyl-coated wire for 20-year service life | Add $4-$8 |
The residential tier is what most flat-lot homeowners are shopping for. A standard 11.5-gauge galvanized fence at four feet handles a windy side yard or a rear boundary in a basin neighborhood without drama. Move to a commercial corridor and you’re into 9-gauge wire at six feet, with heavier posts set deeper because the fence is holding a real perimeter and taking gate traffic.
The hillside tier is where the cost gap opens up. Driven posts and tension wire reinforcement do more work than standard residential hardware, and the engineering follows the slope, not a flat-line average.
The Coastal Marine Layer Changes the Spec
Standard galvanized chain-link is fine inland. Out by the water it isn’t. Within roughly 1 to 1.5 miles of the coast – Santa Monica, Playa del Rey, Venice – we specify vinyl-coated chain-link if you want the fence to last 20 years. Salt air eats bare galvanized wire faster than most homeowners expect, and a “cheap” install that rusts out in eight years costs more than doing it right once.
That coastal upgrade adds $4 to $8 per linear foot in material. It’s the single most common specification gap we see on bids from contractors who aren’t used to working near the water.
Whether you’re inland or coastal, our Fence Installation crews walk every property before pricing, so the wire spec matches the salt exposure.
The LA Hillside Permit Trigger That Rescues Your Budget in Advance
This is the part generic cost guides skip entirely. Fences on slopes steeper than a 5:1 grade inside the City of Los Angeles require a grading permit regardless of material. Chain-link is not exempt. On top of that, driven-post installations on hillsides may require a soils report if the parcel sits in a Restricted Use Zone under the City’s Hillside Ordinance.
Those two requirements are where budgets quietly blow up on hillside parcels. A homeowner gets a fence bid, then discovers the permit and soils work were “if required” contingencies nobody told them about. We build the permit and inspection cost into a fixed line item in our upfront pricing, because on a hillside parcel in LA it is almost always required. The number you see is the number you pay.
From top-tier brand partners to tested fasteners, we’ve got the material side handled. On the hillside jobs we line up the soils work and the permit before a single post is driven. That’s the same home construction discipline we bring to every trade we run, from foundation to finish line.
What Moves Your Per-Foot Number
Before you compare two fence bids, know what’s actually driving the difference:
- Gauge: 11.5-gauge residential wire is lighter than 9-gauge commercial wire. Same height, different lifespan.
- Post spacing: standard is 8 to 10 feet. Hillside and wind-exposed runs tighten that up.
- Height: four feet is residential standard; six feet pushes you into commercial territory.
- Coastal coating: vinyl-coated wire where salt air is a factor.
- Tension wire reinforcement: non-negotiable on slope stabilization and post-fire barriers.
- Permit and soils scope: the line item that separates a real bid from a floor quote.
Our technicians have up to 12 years of experience, and every one is background-checked and arrives in uniform. That matters when a crew is working a steep slope behind your house where the last thing you want is someone learning on the job.
How Groundwork Prices the Work
No-hassle upfront pricing is the whole point of how we bid. You get one number for your specified fence, including the grading permit and inspection where the slope triggers it. Every install carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s a two-year workmanship guarantee on a fence most homeowners expect to never think about again.
Call us any hour and a live person answers, 24/7. No voicemail black holes, no waiting until Monday for a callback on a fence you’re trying to get up before rainy season. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available on larger scopes. The free project estimate and design consult costs you nothing and gives you a real per-foot number for your property.
FAQs
Expect $14 to $26 per linear foot installed for a standard 4-foot residential boundary fence in flat-lot basin neighborhoods, $22 to $38 per foot for 6-foot commercial-grade work in the Valley industrial corridors, and $28 to $52 per foot for hillside slope-stabilization or post-fire erosion-barrier fencing. Coastal properties within a mile or so of the water add $4 to $8 per foot for vinyl-coated wire. Call (888) 427-1733 for an exact quote on your property – estimates are free.
Repair usually costs less when the damage is limited to one run, a single post, or a bent top rail, while full replacement wins once rust, leaning posts, or failed tension wire span most of the fence line. On coastal fences past their service life, patching tends to cost more over five years than a vinyl-coated replacement. Call (888) 427-1733 and we’ll tell you which side of that line your fence is on.
We can often get an estimator to your property same day, with calls answered by a live person 24/7 so you’re not waiting on a callback. Hillside and post-fire erosion-barrier projects that need a soils report or grading permit take longer to schedule than a standard residential line. Call (888) 427-1733 to check availability in your neighborhood.
Yes. In the City of Los Angeles, fences on slopes steeper than a 5:1 grade require a grading permit regardless of material, and chain-link is not exempt. Parcels in a Restricted Use Zone under the Hillside Ordinance may also need a soils report for driven-post installs. We include the permit and inspection as a fixed line item, not a contingency, because on hillside parcels it’s almost always required. Call (888) 427-1733 to see how it applies to your slope.
Get a Real Per-Foot Number for Your Property
National averages won’t tell you whether your fence needs 11.5-gauge or hillside-driven posts with a soils report attached. Groundwork Construction Co. of Los Angeles prices the whole job upfront, permit included, backed by a 730-Day Done Right Promise. Call (888) 427-1733 for a free estimate and design consult – and get your numbers straight before the next storm cycle.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles, CA.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan