A Groundwork company - serving Los Angeles, CA

When to Seal a New Asphalt Driveway? (Los Angeles, CA)

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Seal a New Asphalt Driveway in Los Angeles, CA

The short answer: wait 6 to 9 months after a fresh asphalt pour in Los Angeles, not the 90 days most paving crews quote. The right time also depends on the season you poured, not just the calendar. If your driveway went in during an August Santa Ana heat event, a 90-day seal lands you in November rains, and sealing wet asphalt is worse than not sealing at all. Our technicians have up to 12 years of experience reading exactly this kind of timing, and we book the seal at contract so it doesn’t turn into a forgotten promise six months later. Call (888) 427-1733 for a free estimate on your seal or a new pour.

Why the 90-Day Rule Falls Apart in Los Angeles

The national advice assumes a cooler, wetter climate where asphalt cures slowly and oxidation creeps along. Los Angeles doesn’t work that way. Summer UV indexes here regularly hit 8 to 10, and that intensity breaks down the binder at the surface faster than most of the country will ever see. Left bare, your new driveway will gray out and start to dry before a 12-month seal date arrives.

So the case for sealing at 6 to 9 months is stronger in Los Angeles than almost anywhere else. But there’s a flip side. Asphalt gives off oils and gases as it cures, and seal too early and you trap those gases under the sealer. That’s where peeling and bubbling come from – a film that lifts off in sheets the first hot week. The window matters because of both problems: too late and UV eats the surface, too early and the sealer won’t bond.

The Season You Poured Changes the Math

This is the part contractors skip. Your seal window isn’t just a number of months. It’s a number of months measured against LA’s weather swings.

  • Summer pour (June-August): UV and heat cure the asphalt fast, so you’re on the earlier end – closer to 6 months. But you’re also racing the Santa Ana window, which brings both heat and flying embers.
  • Fall pour (September-November): October and November Santa Anas can blow right past a freshly poured surface. Sealing before the wind season with a fire-resistant or at minimum non-flammable sealer matters if you’re in hillside-adjacent neighborhoods under WUI codes.
  • Winter pour (December-February): Dry days are scarce and the asphalt cures slowly in cool, damp conditions. Give it the longer end – 9 months minimum – and don’t seal on a wet surface.
  • Spring pour (March-May): The most forgiving window. Cures through mild weather and gives you a clean 6 to 9 month runway before the next Santa Ana season.

One more LA-specific pressure: the winter rain window from December to February. Heavy rain on steep, fire-scarred slopes after the Eaton and Palisades fires sends runoff and debris down onto unsealed driveways, saturating the surface and stripping aggregate. Sealing before that rain window isn’t cosmetic – it’s what keeps your new asphalt from losing its top layer in the first wet season.

What to Look For in a Sealer (and a Sealing Job)

Most homeowners fixate on the color and stop there. The product and the prep are what decide whether the job lasts. Here’s how to tell a real sealing job from a quick coat:

  • Surface prep before product. The driveway gets cleaned of oil, dirt, and loose aggregate and is fully dry before anything goes down. A crew that seals over damp asphalt is a crew that didn’t prep.
  • Material discipline. On roofs we run GAF and Owens Corning; on surfaces it’s the same standard – vetted sealers, not whatever was left in the truck. Ask what product goes on your driveway and why.
  • Fire-zone awareness. In WUI areas, a fire-resistant or non-flammable sealer is worth the small upcharge.
  • A scheduled seal written into the contract. The best sealing job is one you don’t have to remember to call about.

The local quirk rivals miss: LA’s patchwork housing stock means a 1920s Craftsman bungalow on the flats, a 1950s stucco tract home, and a hillside place in the Santa Monica Mountains can all be on the same block. Seismic and fire-zone rules color nearly every surface job here, so a sealer that fits one address may not fit the next. Our crews read the property, not a template.

What Sealing Costs in Los Angeles

Upfront pricing, no surprises: Driveway Sealing in Los Angeles runs $295 to $825. That’s the seal itself. If you’re pouring fresh asphalt and scheduling the seal at the same time, the paving is a separate line item:

Service Typical Los Angeles range
Driveway Sealing $295 – $825
Asphalt Driveway Paving $4,130 – $10,620
Concrete Driveway Installation $5,310 – $14,160
Paver Driveway Installation $8,260 – $21,240
Driveway Replacement $5,900 – $16,520

Two things smooth the budget. Our 0% financing for 18 months spreads a larger pour-and-seal project into something that fits a monthly plan, and projects over $10,000 take $1,000 off. Booking the seal at contract – rather than as an upsell call six months out – is how we keep the timing from slipping when the contractor who poured the asphalt moves on to the next job.

If you’re weighing materials, our team lays out the asphalt versus concrete versus paver tradeoffs on the Driveway & Pavers service page, and the full Driveway & Pavers in Los Angeles page covers design and installation start to finish.

When It’s Time to Call a Pro

Sealing a driveway is one of the few exterior jobs a confident homeowner can sometimes handle. The judgment call – is it cured enough, is the surface dry, is the sealer right for a fire-zone address – is where pros earn their keep. And if your driveway is showing alligator cracking, standing water after rain, or soft spots, that’s not a seal problem. That’s a base problem, and it needs eyes on it before you spend a dollar on sealer. Groundwork Construction Co. of Los Angeles is glad to take a look either way.

FAQs

Get Your Seal on the Right Schedule

Poured fresh asphalt and not sure when the seal is due? If you’d rather have it looked at, Groundwork Construction Co. of Los Angeles offers a no-pressure assessment in Los Angeles – call (888) 427-1733. We’ll confirm the cure, check the surface, and put the seal on a schedule that fits LA’s seasons, backed by the 730-Day Done Right Promise.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles, CA.

Need Construction help in Los Angeles? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch