Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterConcrete Contractors Near Me in Los Angeles: Where the Joints Go Decides Whether the Slab Lasts
Concrete doesn’t crack randomly in Los Angeles. It cracks where a contractor failed to place a control joint, or placed it for looks instead of for the expansive Vertisol clay shifting underneath. For homeowners searching “concrete contractors near me” in Los Angeles, the test is simple: ask for the joint layout plan in writing before anyone pours. Groundwork Construction Co. of Los Angeles puts the control joint plan in the proposal, prices it upfront, and backs the finished slab with our 730-Day Done Right Promise. Call (888) 427-1733 and a live person answers, day or night.
The LA slab problem: clay that swells, sun that flash-sets
Drive through any block of 1950s stucco tract homes in the Valley or the flats below the Hollywood Hills and you’ll see the same thing: fifteen-year-old driveways split into uneven rectangles. That’s not bad concrete. That’s good concrete poured on ground that moves.
Much of Los Angeles sits on expansive clay that takes on water in the wet months and shrinks as it bakes through a long dry season. A slab poured without a joint plan fights that movement until it loses. On residential flatwork, control joints should sit no more than 8 feet apart in both directions and be cut to roughly a quarter of the slab depth within 24 hours of the pour. Plenty of crews around Los Angeles cut late or space joints to make a driveway look tidy rather than to release soil stress. You get two or three clean seasons, then a crack that runs straight through the middle of a panel.
Then there’s the heat. A higher-cement mix poured in direct August sun in the Valley can flash-set before there’s time to finish the surface, which leaves scaling and craze cracks that have nothing to do with the mix itself. Experienced Los Angeles concrete crews pour early morning and cover fresh work with curing blankets. We work around that schedule, not around when it’s convenient to show up.
Post-tension or conventional? A near-me search won’t tell you, so ask
Concrete in Los Angeles isn’t only a flatwork problem. Garages and driveways sit on the same ground that carries seismic movement, and post-tension slabs come up more often on higher-end residential projects here for exactly that reason. If a contractor can’t explain the difference between post-tension and a conventional rebar slab for your driveway or garage floor, you’re talking to someone working from a 1980s playbook.
- Conventional slab: steel rebar or mesh on compacted, tested base. Good fit for most residential flatwork when the joint plan and base prep are right.
- Post-tension slab: tensioned cables compress the slab so it resists soil movement and flexes rather than cracks. Higher cost, more engineering, and it belongs on sites where the clay or the load demands it.
- Grade changes over 12 inches: on an LA residential lot, moving grade more than a foot requires a grading permit. We coordinate permits as part of the project, not as a surprise after the pour.
What concrete work costs in Los Angeles right now
Pricing for concrete in Los Angeles runs higher than most of the country because of code, soil handling, and permit review. These are the ranges we work from, and the number in your written estimate is the number you pay:
| Project | Typical Los Angeles range |
|---|---|
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement | $5,900 – $16,520 |
| Paver driveway installation | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
If you’re weighing poured concrete against pavers, our Driveway & Pavers page breaks down how each handles LA soil, and the Driveway & Pavers in Los Angeles guide covers sloped lots and hillside drainage. Pavers move with the ground a little better on badly cracked clay; concrete is the cleaner choice when the base and joint plan are handled correctly.
What makes a concrete contractor worth the call in Los Angeles
This city’s construction rules stack up fast. Fault-adjacent design, hillside grading standards, and fire-resistant detailing in the hills all shape how a foundation or a flat driveway gets built. A contractor who only shows up to pour and leaves isn’t ready for that. Here’s what we put in writing on every concrete project:
- The control joint layout, drawn out in the proposal, so you see where the cuts go and why before we pour.
- Upfront pricing, no surprises. The scope is fixed in writing, with 0% financing for 18 months and $1,000 off projects over $10,000.
- The 730-Day Done Right Promise. If the slab doesn’t perform, we make it right. Crack performance is our accountability, not something you’re told is “a natural characteristic of concrete.”
- Background-checked, uniformed technicians on every job, with up to 12 years of experience.
- A live person answers the phone, 24/7. No voicemail.
Some sites call for more than a flat pour. Where a homeowner is planning a detached unit over new foundation work, prefab systems like Plant Prefab and Mighty Buildings come into the conversation, and concrete scope, grade, and drainage all have to line up around them. From foundation to finish line, that’s a single contractor coordinating the trades instead of three bidding against each other.
FAQs
Concrete driveway installation in Los Angeles typically runs $5,310 to $14,160 depending on square footage, base prep, and whether the site needs a grading permit. Driveway replacement falls in the $5,900 to $16,520 range. Call (888) 427-1733 for an exact quote, and estimates are free.
Cracking usually traces to joint placement and base compaction, not to the concrete itself. On LA’s expansive clay, joints spaced wider than 8 feet or cut shallow give the slab nowhere to relieve stress, so it splits. Call us and we’ll look at what’s under the slab before recommending a fix.
Often yes, but the moment the work changes grade by more than 12 inches on a residential lot, a grading permit is required. Hillside lots bring additional rules. We handle permit coordination as part of the project so you aren’t the one chasing the counter. Call (888) 427-1733 to walk through your site.
Same-day estimates are often available across Los Angeles, and someone answers the phone around the clock. Call (888) 427-1733 and we’ll schedule a free project estimate and design consult that fits your week.
Ready to see a joint plan before anyone pours? Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate with upfront pricing, $1,000 off projects over $10,000, and 0% financing for 18 months. Backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles, CA.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan