Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose PGT Construction
Groundwork Construction Co. of Los Angeles provides independent PGT construction service across Los Angeles: window and door diagnosis, OEM-compatible parts replacement, impact window installation, and roofing work tied to the same envelope. We’re not affiliated with or authorized by PGT. What sets our PGT work apart is that we treat these products as what they are: Florida-engineered impact systems now living through Southern California sun, Santa Ana wind gusts, and seismic movement, which means the failure points here aren’t the ones the manufacturer’s literature covers. Call (888) 427-1733 and a live person answers, day or night.
Why Trust Groundwork Construction Co. of Los Angeles for Your PGT Construction?
PGT builds its reputation on wind-borne debris codes written for coastal Florida, so the brand’s engineering assumptions don’t map cleanly onto a fault-adjacent, fire-prone basin. Our technicians have up to 12 years of experience with these specific systems, and they know where the real stress lands: the corner welds that take thermal expansion on a west-facing wall in the San Fernando Valley, the rollers that carry the weight of impact-rated sliding glass, the weatherstripping that dries out faster here than anywhere in the Southeast.
We use OEM PGT replacement parts for weatherstripping, rollers, and insulated glass units so the impact rating and warranty compliance stay intact. Quality aftermarket hardware is fine for handles, locks, and other non-structural pieces; it’s not fine for anything the rating depends on. Every PGT project carries the 730-Day Done Right Promise, arrives background-checked and in uniform, and gets written upfront pricing. The number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Los Angeles
These are the PGT issues we see most in Los Angeles homes, and what actually causes each one.
- Failed weatherstripping and sweeps on PGT WinGuard sliding glass doors. When a door whistles during Santa Ana winds or water shows up at the interior threshold, the weatherstripping has usually compressed and hardened past the point where it seals. Los Angeles sun accelerates this. The sweep is the first thing to fail and the cheapest thing to ignore, which is why water intrusion usually shows up as floor damage before anyone notices the seal.
- Hazy or discolored insulated glass units in older WinGuard windows. That fog between the panes is seal failure, not dirt. The desiccant in the spacer reaches saturation and moisture enters the cavity. On pre-2010 WinGuard units, we see it on the sun-exposed elevations first, particularly south and west walls in the flats.
- Corroded or misaligned rollers and tracks on heavy impact sliding doors. Impact-rated glass is heavy, and the rollers carry all of it. Debris in the track, grit from hillside wind, or a bent track from house settling all show up as a door that drags or jumps its track. Left alone, the frame takes the load and starts to distort.
- Cracking or separation of vinyl frame welds at the corners. Vinyl moves with temperature, and Los Angeles swings between cool nights and hot afternoons. Corner welds that were sound at installation can crack years later, opening a path for air and water. This one shows up as a fine hairline at the miter, easy to miss until the whistling starts.
- Rattling or shifting impact units after seismic movement. A window that survived a moderate shaker without breaking can still shift in its rough opening. PGT impact units are heavy and stiff, so when they move, the sealant and flashing around the perimeter take the hit.
PGT Parts & Our Repair-vs-Replace Approach
Parts for PGT systems get sourced per job. We don’t claim local stock of PGT components, so the right part is ordered against your specific series and model number. That matters more than it sounds, because WinGuard Vinyl, WinGuard Aluminum, and Premier Series parts aren’t interchangeable, and a glass unit has to match the original in thickness, rating, and make-up to preserve impact performance.
Here’s how we decide: if the frame is sound and the failure is weatherstripping, rollers, or a single glass unit, we repair. If corner welds are failing on multiple units, or glass seals have failed repeatedly on the same elevation, replacement usually comes out cheaper over ten years than chasing the next failure. We tell you which category you’re in with a written line-item quote, not a recommendation based on the ticket size. Call (888) 427-1733 to schedule your free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the series and model from the label, then check operation, seals, weep holes, and hardware. On a sliding door, we test the roll under load rather than just sighting the track.
- 2
Scope and written quote. You get line-item pricing with OEM parts and labor called out separately, plus the repair-versus-replace comparison if it’s close.
- 3
Repair or install. Weatherstripping, rollers, and glass units go in as PGT OEM. New impact windows get flashed and sealed to the rough opening with seismic movement in mind, which isn’t in any Florida installation guide.
- 4
Test. Every door and window gets cycled, checked for square, and water-tested at the frame on installs.
- 5
730-Day Done Right Promise. If anything we touched fails, we make it right. The guarantee is in writing.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Los Angeles
We work on PGT WinGuard Vinyl Impact Windows, PGT WinGuard Aluminum Impact Windows, PGT Premier Series Vinyl Windows, and PGT WinGuard Sliding Glass Doors. That includes OEM glass unit replacement on any of the impact lines, roller and track service on the sliding doors, hardware replacement, and full impact window installation on homes that don’t have PGT yet. Roof repair is often part of the same job when window flashing or a failed frame has let water into the roof edge or wall assembly. Impact Window Installation in Los Angeles runs $9,440 – $29,500; standard Window Replacement runs $5,310 – $17,700; Roof Repair runs $470 – $2,125.
We Also Service These Brands
PGT is one line in a curated portfolio, not our only one. If your project also involves KraftMaid cabinetry, Cambria or Silestone counters, or Kohler fixtures, we handle the whole scope with one contractor and one point of accountability. That means windows, doors, roof, and interior finishes don’t need three separate schedules.
FAQs – PGT Construction Service in Los Angeles
No. We’re an independent PGT service provider, not a PGT dealer, authorized installer, or manufacturer representative. We work on PGT products and install them, but we have no affiliation with the company. Call (888) 427-1733 for a free estimate.
Yes, for weatherstripping, rollers, glass units, and anything else the impact rating depends on. OEM parts keep the rating intact and protect your warranty. For non-structural items like handles and locks, quality aftermarket hardware is fine and often more available.
Most single-window or door service is finished in one visit. OEM glass units are ordered per unit, so a fogged IGU typically takes longer than a roller or weatherstripping job. Full impact window installation depends on count and access. You’ll get the schedule in writing before we start.
WinGuard Vinyl Impact Windows, WinGuard Aluminum Impact Windows, Premier Series Vinyl Windows, and WinGuard Sliding Glass Doors. We also install new PGT impact units on homes replacing older single-pane or non-impact windows.
Not when service is done with OEM parts to the manufacturer’s spec. Improper installation or aftermarket parts on rated components can void coverage, which is exactly why we source the right part per job. Call (888) 427-1733 and we’ll walk through what your coverage requires before any work starts.
Impact window installation runs $9,440 – $29,500, standard window replacement $5,310 – $17,700, and roof repair $470 – $2,125. Sliding door roller and weatherstripping service is a smaller line item. Call (888) 427-1733 for an exact quote – estimates are free.
Yes, in most cases. If the vinyl frame, welds, and sash are sound, we order an OEM PGT glass unit matched to your series and swap just the IGU. Replacement of the whole window becomes the better answer when frame welds are cracking or the same elevation has failed seals across multiple units.
Worn rollers, compressed weatherstripping, or debris in the track. Impact glass is heavy, and the rollers carry all of it, so they’re usually the culprit on a door that starts dragging or jumping the track. A technician replaces the rollers and weatherstripping with OEM parts, adjusts the door, and checks the glass seal.
Yes. Los Angeles sun dries out weatherstripping and sweeps faster than in the Southeast, and Santa Ana winds push grit into door tracks. Cleaning the track, lubricating rollers with a dry silicone, and inspecting the perimeter seal twice a year prevents most of the failures we get called for.
Repair usually wins if the frame is sound. A single failed IGU on an otherwise healthy WinGuard unit is worth replacing. If three or more units on the same sun-exposed elevation have fogged, replacement is more cost-effective over the long run. Call (888) 427-1733 for a free assessment.
Yes. PGT impact units are heavy and stiff, so the rough opening, flashing, and perimeter seal have to be detailed for it, especially on 1920s-40s bungalows where the framing wasn’t built for that weight. That detailing is where the seismic consideration comes in, and it’s not in the manufacturer’s installation guide.
Book Your PGT Service in Los Angeles, CA
If your PGT windows or sliding doors are whistling, fogging, dragging, or you’re planning a new impact installation, call Groundwork Construction Co. of Los Angeles at (888) 427-1733. A live person answers around the clock. You’ll get a free estimate with written line-item pricing, 0% financing for 18 months available, $1,000 off projects over $10,000, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co. of Los Angeles.