Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose CWS Construction
We provide independent CWS cabinet repair, refacing, and installation service in Los Angeles, and we’ve built this page around the specific failures CWS cabinetry actually develops: thermofoil (RTF) door peeling, frameless box swelling, and concealed euro hinge fatigue. We are an independent CWS service provider. We are not affiliated with, authorized by, or sponsored by CWS, so we diagnose your boxes, doors, and hinges on their real condition instead of routing everything toward a manufacturer claim.
CWS is a cabinet line that moves through dealer and big-box channels, which means it shows up all over Los Angeles – in condo kitchens, mid-century renos, and rental turnovers from Koreatown to the Valley. Our technicians have up to 12 years of experience with installed cabinetry, and every call is answered by a live person, 24/7. Call (888) 427-1733 to schedule a free estimate.
Why Trust Groundwork Construction Co. of Los Angeles for Your CWS Construction?
Our technicians work on CWS cabinets as installed carpentry, not as warranty administrators. That matters because most CWS problems aren’t manufacturing defects at all – they’re installation and moisture realities that a warranty claim wouldn’t touch. A CWS thermofoil door that’s peeled along its top edge above the dishwasher isn’t a defect; it’s heat-and-steam cycling against an edge-sealed laminate wrap. Knowing which failures are product-driven and which are environment-driven is the difference between a $400 door order and a $4,000 mistake.
Where the CWS line is still available, we source OEM doors, drawer fronts, and hinge plates so profiles and finishes match what’s already in your kitchen. Where a series has been discontinued, we match with quality aftermarket euro hinges (Blum-style) and color-matched thermofoil or painted fronts – not the cheapest hardware that happens to fit. Every install is covered by our 730-Day Done Right Promise, and pricing is upfront, written line-item, and unchanged once work starts. Background-checked, uniformed technicians on every job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Los Angeles
These are the CWS failures we see most often in Los Angeles homes. Each has a specific cause worth understanding before you approve any repair.
- Thermofoil (RTF) door delamination on CWS slab and shaker doors. The thin thermofoil wrap lifts at the edges and around the hinge locations first. Doors within three feet of a range or dishwasher cycle through heat and steam hundreds of times a year, and the adhesive at the edge is what gives. Once the peel starts, it travels – you can’t glue it back reliably.
- Frameless box racking and loose corner joints on CWS European-style frameless cabinets. Full-overlay MDF doors on concealed euro hinges put a repeated swing load on the corner fasteners. Doors that get slammed, or boxes that get shifted during a remodel, work those joints loose and the cabinet goes out of square. You’ll notice doors that won’t stay aligned no matter how many times they’re adjusted.
- Particleboard and MDF substrate swelling at sink bases. This is the one that kills CWS cabinets. A slow supply-line or disposal leak, or a dishwasher that’s vented steam for a decade, swells the substrate. Once it swells and crumbles, the hinge screw holes blow out and there’s nothing left for a screw to bite. No hinge plate fixes this.
- Concealed euro hinge fatigue and stripped hinge plates. The CWS euro hinge plates are small and the mounting screws go into MDF. Repeated adjustment, or a single over-torqued screw, strips the plate. Doors sag and start rubbing against adjacent boxes, and the rub eventually wears the finish off both.
- CWS wood-veneer and painted-finish edges chipping at high-traffic corners. Painted and veneer CWS lines take edge damage from pots, vacuum cleaners, and cabinet doors swinging into the adjacent box. Spot touch-ups never match; a full door-front replacement is usually the honest fix.
A common call is a CWS thermofoil door that has started peeling along its edge above the dishwasher, with a sagging neighbor door on a stripped euro hinge plate. The usual cause is heat-and-moisture cycling plus a particleboard box that swelled at the sink base, so the competent fix is to replace the swollen base box, re-hang the doors on fresh hinge plates, and reface or replace the damaged fronts rather than patch the peel. Often that means templating a new countertop at the same time so the new boxes and existing quartz or granite align.
CWS Parts & Our Repair-vs-Replace Approach
We do not stock CWS parts locally and we don’t claim to. Each job starts with a measurement and a series identification, then we source what’s actually available: OEM CWS doors, drawer fronts, and hinge plates when the specific line is still in production, or quality aftermarket euro hinges and color-matched thermofoil or painted fronts when it isn’t. Door-front lead times vary by finish; your written estimate will state the expected window before you approve anything.
The repair-vs-replace call is honest and it’s simple. If one or two boxes are failing – a single sink base, one loose corner – we repair and reface. If water damage has reached multiple sink or base cabinets and the substrate has swollen under the counter, replacement is usually cheaper than patching crumbled particleboard under a fresh door. We’ll show you both numbers in writing and let you pick.
Call (888) 427-1733 for a free estimate – we’ll tell you which side of that line your kitchen is on before you spend a dollar.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We identify the CWS series – frameless European, thermofoil slab or shaker, wood-veneer, or painted finish – then test each box and door. Hinge plate torque, corner joint tightness, and substrate moisture at the sink base tell us what’s actually failing and what’s just along for the ride.
- 2
Repair or install. Swollen base boxes come out. New boxes get set plumb and shimmed to the wall, corner joints reinforced, and euro hinge plates mounted in solid material or with proper inserts – not screwed back into crumbled MDF. Doors and drawer fronts get hung and adjusted for reveal and clearance.
- 3
Test. Every door swings, every drawer runs, every hinge gets a final adjustment, and all reveals are checked against the adjacent boxes and the countertop edge. We open and close each one with you before we pack up.
- 4
730-Day Done Right Promise. The work is backed in writing for 730 days. If it’s not done right, we make it right – and the number on your written estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Los Angeles
We work on the CWS cabinet families Los Angeles owners actually have: European-style frameless cabinets with full-overlay MDF doors and concealed euro hinges; thermofoil (RTF) slab and shaker doors; assembled and RTA cabinet boxes sold through dealer channels; and the wood-veneer and painted-finish cabinet lines. We service, reface, and install across all of them – box-level repair, door and drawer-front replacement, hinge and hardware upgrades, and full cabinet installation tied into countertop templating.
Los Angeles construction is governed by some of the strictest seismic and fire-zone rules in the country, and cabinet installation here answers to them. A full kitchen remodel in a 1920s Spanish Colonial bungalow on the flats often means dealing with out-of-square wall framing, not just leveling boxes. A hillside build in the Hollywood Hills or a soft-story apartment building being retrofitted under city mandate means cabinets that were installed against a wall that’s since moved. We install to the room as it actually is, and we check what permits your project needs before work starts.
We Also Service These Brands
CWS is one line among many in Los Angeles kitchens. We also handle KraftMaid, Cambria, Silestone, and Kohler – so whether your project mixes CWS boxes with a Cambria or Silestone quartz top and Kohler fixtures, or you’re replacing a discontinued line entirely, it stays one scope, one written estimate, one contractor from foundation to finish line. Insured and bonded, with permits pulled and inspections passed.
FAQs – CWS Construction Service in Los Angeles
No. We are an independent CWS service provider and we have no affiliation with, authorization from, or sponsorship by CWS. We diagnose and repair CWS cabinetry on its physical condition and install it as we would any cabinet line. Call (888) 427-1733 for a free estimate.
Yes, whenever the specific CWS line is still in production – we source OEM doors, drawer fronts, and hinge plates so finishes and profiles match. When a series has been discontinued, we use quality aftermarket euro hinges and color-matched thermofoil or painted fronts and we tell you exactly which parts you’re getting before you approve the work.
A door and hinge repair is often completed in a single visit; a cabinet refacing or box replacement typically runs one to three days depending on door-front lead times and how many boxes are involved. Your written estimate states the expected schedule, and we don’t move it once work starts. Call (888) 427-1733 to schedule a free estimate for your Los Angeles kitchen.
We cover CWS European-style frameless cabinets with full-overlay MDF doors and concealed euro hinges, thermofoil (RTF) slab and shaker doors, assembled and RTA cabinet boxes sold through dealer channels, and CWS wood-veneer and painted-finish lines – including refacing, box repair, and full installation.
Independent service can affect a manufacturer warranty, and we won’t tell you otherwise. We’re not a warranty administrator, so before any work we help you check the terms of your CWS coverage – many failures we see, like thermofoil peeling from heat cycling or substrate swelling from a leak, aren’t warranty-covered events anyway. You’ll know your options before you approve anything.
CWS cabinet work in Los Angeles runs from a few hundred dollars for a hinge and door-front repair up to a full kitchen remodel at $16,520 – $53,100, depending on how many boxes are replaced and whether countertops are retemplated. These are our standing Los Angeles ranges:
| Service | Los Angeles Price Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Full Kitchen Remodeling | $16,520 – $53,100 |
Call (888) 427-1733 for an exact quote – estimates are free, and we also offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
Book Your CWS Service in Los Angeles, CA
Whether it’s one peeling thermofoil door or a full CWS cabinet installation across a Los Angeles kitchen, we’ll diagnose it honestly, quote it in writing, and back it for 730 days. Calls are answered by a live person, 24/7. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles.