A Groundwork company - serving Los Angeles, CA
M

Mr-Glass Construction Service in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Los Angeles Homeowners Choose Mr-Glass Construction

Groundwork Construction Co. of Los Angeles provides independent Mr-Glass construction service across Los Angeles, covering frameless shower enclosures, mirrored closet systems, integrated blind glass units, and wet-area splash and shelving. Mr-Glass builds its glazing as retrofit-friendly, standalone products rather than wall-dependent assemblies, so an independent contractor can take a job from layout to finish without manufacturer lock-in. We’re not affiliated with or authorized by Mr-Glass; we’re an independent service provider. Everything below is how we actually work on their products in Los Angeles homes. Call (888) 427-1733 with your model and we’ll tell you what it needs.

Call (888) 427-1733

Why Trust Groundwork Construction Co. of Los Angeles for Your Mr-Glass Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent on glass assemblies that have to be plumb, square, and watertight the first time. Mr-Glass products reward that kind of patience. A frameless shower door that’s hung two degrees off looks fine on install day and drags on the threshold six months later.

We order OEM-compatible hardware for every Mr-Glass mechanical part – roller carriages, pivot bearings, dampers, track clips – matched to the actual series rather than a generic lookalike. For sealed integrated-blind units, OEM glass is the only reliable route, and we say so instead of trying to rebuild a mechanism behind the pane. Every Mr-Glass job we run is warranty-safe: we don’t field-trim sealed glass, we don’t drill where the edge seal calls the shots, and we document the model and part numbers before the punch-out so a future warranty claim has a clean paper trail.

All of it is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Every technician is background-checked and arrives in uniform, and a live person answers our line 24/7 – not a voicemail box that fills up over the weekend.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Fix in Los Angeles

  • Frameless shower door roller and pivot failure. On Mr-Glass single-slider and Neo-Angle hinged configurations, the roller carriage or pivot bearing typically carries more load than it was spec’d for once a heavy glass slab is hung. The door drops a few millimeters, the edge starts dragging, and the panel drifts out of alignment within the first few years. It reads like a glass problem. Nine times out of ten it’s hardware.
  • Jammed integrated blind glass units. Mr-Glass aluminum venetian blinds are sealed between two panes. When the slat mechanism or cord guide fails, the slats stick mid-tilt or sag to one corner, and the whole unit stops being usable. Sealed units aren’t field-serviceable – replacement glass is the fix, not a repair.
  • Mirrored closet door track misalignment. Mr-Glass mirrored closet and wardrobe bypass systems bind when the track settles or the roller wears unevenly. Chipped edges follow, and a chipped mirror edge on a sliding door is both a finish problem and a safety issue.
  • Edge-seal delamination on wet-area glass. Sealed glass assemblies in Los Angeles bathrooms live in warm, humid air most of the year. The edge seal breaks down over time, moisture works in, and the glass hazes or delaminates at the edge. No manufacturer warrants a sealed assembly after field trimming, which is exactly why we don’t trim them.
  • Chipped hinge cutouts on shower glass. Mr-Glass frameless shower panels are tempered, and a hinge-area chip can’t be polished out – the temper is the glass. Once that chip shows up, the panel is replaced, not repaired, and the opening is re-templated.

Mr-Glass Parts & Our Repair-vs-Replace Approach

For mechanical parts – rollers, pivots, dampers, hinges, track hardware – quality aftermarket units run within tolerance of Mr-Glass OEM and are the practical choice on a repair. For sealed integrated-blind glass, OEM replacement is the only route that keeps the unit and the warranty intact; a rebuilt blind behind a resealed pane leaks eventually. We source parts per job against the model and series, so plan on a short lead time on integrated-blind glass and on discontinued hardware rather than assuming anything is sitting on a shelf.

Deciding repair vs replace comes down to three questions. Is the glass itself sound? Is the wall framing still plumb? Is the part available at a reasonable cost? If glass is chipped at a hinge, the seal is compromised, or the unit is out of production and delaminating, honest advice is usually to replace the panel and stop chasing parts. Call (888) 427-1733 and we’ll price both paths so you can compare them side by side.

Our Mr-Glass Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Mr-Glass series, check the glass for chips or edge-seal haze, verify the wall framing is still plumb, and photograph the hardware before touching it. That record matters if a warranty question comes up later.
  2. 2
    Repair or install. Mechanical repairs get OEM-compatible hardware and a re-hang with proper adjustment at the pivots and rollers – not shims. New installs get dry-fit and leveling before any drilling.
  3. 3
    Test. Every shower door gets cycled open and closed multiple times, checked for clearance at the threshold and sweep, then water-tested at the seals. Bypass closet doors get run the full length of the track looking for bind. Integrated-blind units get cycled through full tilt and raise-lower before we sign off.
  4. 4
    Warranty. You get the model and part numbers in writing, plus our 730-Day Done Right Promise on the workmanship. If a roller we installed fails, we come back.

Mr-Glass Products We Service & Install in Los Angeles

We handle Mr-Glass frameless sliding shower door systems, including single-slider and Neo-Angle hinged configurations. We work on Mr-Glass mirrored closet and wardrobe door systems, bypass and framed. Integrated blind glass units are in scope, along with their OEM replacement glass. Utility and wet-area glass shelving and splash systems round it out. Frameless glass shower enclosures, walk-in showers and shower remodeling, and bathroom vanity installation are the three sub-services we run most often on Mr-Glass jobs in Los Angeles, and they pair naturally when a bathroom is being rebuilt around existing glass.

We Also Service These Brands

Mr-Glass is one brand in a much wider cabinet, counter, and fixture world we work in daily. We also service KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures – and because we’re not tied to a single manufacturer, we can give you a straight answer about what to keep and what to replace rather than steering you toward whatever one brand sells.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

FAQs – Mr-Glass Construction Service in Los Angeles

Service Typical Los Angeles Range
Full Kitchen Remodeling $16,520 – $53,100
Small Kitchen Remodel $10,620 – $23,600
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Backsplash Installation $945 – $2,950
Full Bathroom Remodeling $10,620 – $33,040
Small Bathroom Remodel $5,900 – $14,160
Walk-In Shower Installation $5,310 – $14,160
Tub-to-Shower Conversion $4,130 – $11,800
Shower Replacement $3,540 – $10,030
Bathroom Vanity Installation $945 – $3,540

Book Your Mr-Glass Service in Los Angeles, CA

Tell us the model and what it’s doing – dragging, binding, jammed blind, chipped edge – and we’ll tell you whether it’s a hardware swap or a panel replacement before you commit. Free estimate, upfront pricing, 730-Day Done Right Promise on the workmanship. Call (888) 427-1733 and a live person will pick up.

Written by the team at Groundwork Construction Co..

Additional Mr-Glass Construction Detail for Los Angeles

Mr-Glass Installation in Los Angeles: Seismic and Fire-Zone Realities

Los Angeles construction answers to some of the strictest seismic and fire-zone rules in the country, and glass assemblies are not exempt. A frameless shower enclosure hung on a wood-stud wall in a 1920s Spanish Colonial bungalow on the flats behaves differently during a minor tremor than the same enclosure in a 1960s dingbat in Koreatown or a postwar stucco tract home in the Valley. We check framing plumb and fastener anchorage before setting any Mr-Glass panel, because a door hung true to a wall that has already racked out of square will fail its adjustment within months. In hillside neighborhoods in the Santa Monica Mountains and Hollywood Hills, pier-and-grade-beam foundations move subtly through wet winters and dry fire seasons alike, and we account for that when we template an opening.

Wildfire, Santa Ana Winds, and Your Mr-Glass Glass

The Mediterranean climate means dry fire seasons and Santa Ana winds that push wildfire into the urban edge, so roofing, siding, and deck materials in hillside neighborhoods increasingly have to meet wildland-urban-interface (WUI) ignition-resistant standards. Glass plays a role here too: exterior-facing glass assemblies in fire-prone zones see more thermal cycling than the manufacturer designed for, and edge seals that were tight on day one can degrade faster. For interior Mr-Glass wet-area glass and integrated blind units, the driver is different – humidity in a Los Angeles bathroom. The edge seal on any sealed glass assembly breaks down over time in warm, damp air, and no manufacturer warrants a sealed unit after field trimming. We don’t trim them. We replace them with OEM glass, seal correctly, and leave the warranty intact.

How a Typical Mr-Glass Frameless Shower Door Call Runs

A typical Mr-Glass frameless shower door call starts with a glass panel that no longer clears the threshold or swings back to level – usually a worn roller carriage or pivot bearing that has taken on more weight than specified. A qualified pro first confirms the glass is sound and the wall framing is still plumb, then replaces the roller or pivot hardware with OEM-equivalent parts and adjusts the door panel rather than shimming it. If the glass edge has already chipped against the frame, panel replacement enters the picture and the fix shifts from hardware to re-templating the opening. That’s the distinction most Mr-Glass service calls miss: it isn’t the glass that failed, it’s the hardware holding it, and chasing a shim instead of the worn bearing just delays the drop.

Written by the team at Groundwork Construction Co..

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch