Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Therma-Tru Construction
Groundwork Construction Co. of Los Angeles provides independent Therma-Tru construction service across the city, handling fiberglass entry and patio door repair, replacement and installation for the model lines most local homes already have. What sets our Therma-Tru work apart is that we treat these doors as part of the building envelope, not a slab you drop into a hole. We check the subframe, threshold, flashing and seal because that’s where Therma-Tru problems actually start in Los Angeles.
We are an independent local provider with no manufacturer affiliation, so the advice you get is about what your door needs, not what a corporate page wants us to say. Our technicians have up to 12 years of experience on Therma-Tru systems, from Fiber-Classic slabs to the multi-point locking hardware on Smooth-Star and fiberglass patio units.
Call (888) 427-1733 and you’ll reach a live person any hour of the day, every day.
Why Trust Groundwork Construction Co. of Los Angeles for Your Therma-Tru Construction?
We work on Therma-Tru doors constantly, which means we know the brand’s quirks instead of guessing at them. That starts with recognizing a Fiber-Classic slab by its panel profile and knowing which ones still have supported replacement stock versus ones where we’re better off rebuilding the opening. It continues into the lock hardware. Therma-Tru’s multi-point systems have their own geometry, and a cartridge that doesn’t match won’t sync with the existing strike plates no matter how many times you adjust it.
Parts matter. When a model is still supported, we source OEM Therma-Tru hardware and replacement slabs so the repair actually fits and holds. Aftermarket parts have their places, but multi-point lock systems are rarely one of them. On warranty-safe practice, we document what we remove and why, keep the door’s structural elements intact wherever the failure is hardware or weatherstrip, and never take shortcuts that could compromise coverage you already have.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Technicians are background-checked and arrive in uniform. Pricing is upfront, and the number you see is the number you pay. Los Angeles homeowners get straight answers and written accountability, backed by a workmanship guarantee that runs longer than most.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Los Angeles
- Delamination and surface blistering on Fiber-Classic slabs. The fiberglass skin separates from the core on sun-blasted south- and west-facing entries. In Los Angeles, a west-facing door takes relentless afternoon UV, and once moisture gets under a compromised skin, bubbling shows up along the bottom rail and panel edges first.
- Stiff or failed multi-point locks and warped slabs that won’t latch. Common on Therma-Tru fiberglass patio doors after seasonal movement. The slab shifts, the lock hardware falls out of alignment, and the door either drags or refuses to catch. Coastal humidity and inland heat swings both drive it.
- Rotting wood subframes, thresholds and brickmold. Especially on older Los Angeles installs where the door outlasted its framing and weather seal. Water gets behind a failed seal, the wood absorbs it, and the failure spreads into the opening itself. This is the one most generic Therma-Tru pages skip.
- Weathered weatherstripping and a sagging slab. Worn seals and a hinge that’s given out let drafts and water in. You’ll feel it as a cold spot or see it as scraping along the sill. In hillside Los Angeles homes facing Santa Ana winds, that failed seal means driving rain pushed straight at the door.
- Out-of-square slabs and dropped hinges. The door no longer sits square in the frame, so it binds at the top corner or gaps at the latch side. Left alone this turns a hinge or weatherstrip repair into a full replacement.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Genuine Therma-Tru hardware and replacement slabs are our default when the model is still supported, especially on multi-point lock systems where aftermarket parts often won’t line up with the existing strike plates. We source parts per job rather than stocking them locally, so we pull the right piece for your specific model line and vintage. That matters in a city with as many door vintages as Los Angeles.
The repair-or-replace call is honest. If the slab, frame and threshold are all failing together, a full replacement is usually the better spend and we’ll tell you so. If the problem is a lock cartridge, weatherstrip or a single panel, a targeted repair makes more sense and lasts. We walk you through which one you’re looking at before anyone touches a tool. Call (888) 427-1733 and we’ll talk through what your door is actually doing.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab, subframe, threshold, flashing and weather seal together, because a Therma-Tru failure at the door is usually a failure at the opening. We identify the model line so we know what parts are supported.
- 2
Repair or install. For a repair, we replace the failed component with OEM-compatible hardware or a matching slab. For an install, we set the unit plumb and square and flash the opening before the trim goes on.
- 3
Test. We cycle the multi-point lock, check the latch and strike alignment, and confirm the slab seals without dragging or gapping. We check for drafts and water intrusion points before we call it done.
- 4
Warranty. Every Therma-Tru job carries our 730-Day Done Right Promise, and we document what we did so your coverage on the door itself stays clear.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Los Angeles
We service and install the Therma-Tru lines most Los Angeles homes actually have: Fiber-Classic entry slabs, the Smooth-Star series, Profusion fiberglass doors, and Therma-Tru fiberglass patio and entry systems with multi-point lock hardware. We handle weatherstripping, hinges, thresholds, brickmold and subframe repair around all of them. Whether your door is a decade old or a fresh install that never sat right, the repair is the same conversation about what’s failing and why.
We Also Service These Brands
Groundwork Construction Co. of Los Angeles works across brands, not just Therma-Tru. That range shows up in kitchens and baths too, with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures. If your Therma-Tru door project sits inside a larger remodel, we cover it under one roof, from the entryway to the kitchen.
FAQs – Therma-Tru Construction Service in Los Angeles
No. We are an independent local provider with no manufacturer affiliation or authorization from Therma-Tru. We simply have deep, hands-on familiarity with the Therma-Tru lines most Los Angeles homes have, and we service them as an independent contractor.
Delamination along the bottom rail means the fiberglass skin has separated from the core, usually after UV exposure and moisture got under a compromised edge. On a west- or south-facing Los Angeles entry, that’s a constant battle, and once the skin blisters the core can absorb water. We assess whether the slab is worth repairing or needs replacement, and we reflash the opening so it doesn’t repeat. Call (888) 427-1733 for a free estimate.
A stiff multi-point lock often can be repaired by replacing the lock cartridge and realigning the hardware, if the slab is still sound. If the slab has warped and the whole system is out of sync, replacement is the honest answer. We check the slab and frame together before recommending either.
Yes, we use OEM Therma-Tru hardware and replacement slabs when the model is still supported. That matters most on multi-point lock systems, where aftermarket parts often won’t sync with the existing strike plates. When a model is no longer supported, we talk through the compatible options.
A door that won’t latch and drafts is often a hinge, strike or weatherstrip issue that a targeted adjustment can fix. If the slab has gone out of square and the frame or threshold is also failing, replacement is cleaner. We diagnose the whole opening before deciding, and the estimate is free. Call (888) 427-1733.
Los Angeles UV and coastal moisture are hard on fiberglass entries: constant sun degrades the skin and seals, and salt air plus humidity work on the hardware and the wood subframe. That’s why thresholds and brickmold fail before the slab does on many local installs. We build repairs around those conditions so the same spot doesn’t fail twice.
Here are our market-calibrated ranges for the work that typically surrounds a Therma-Tru door project in Los Angeles.
| Service | Price Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
| Roof Repair | $470 – $2,125 |
Call (888) 427-1733 for an exact quote on your Therma-Tru repair or replacement. Estimates are free.
Book Your Therma-Tru Service in Los Angeles, CA
If your Therma-Tru entry or patio door is bubbling, sticking, drafting or failing to latch, we’ll diagnose it and give you a straight repair-or-replace answer. Calls are answered by a live person 24/7, and estimates are free. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 to book your Therma-Tru service.
Written by the team at Groundwork Construction Co..