A Groundwork company - serving Los Angeles, CA

Cover Construction Service in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Los Angeles Homeowners Choose Cover Construction

We provide independent Cover construction, repair and service in Los Angeles: kitchen and bathroom layouts built on Cover frameless cabinetry and its quartz countertop program, scoped, installed and repaired by our technicians. What makes our Cover work different is that we treat it as cabinetry, not as a catalogue order – we level it, shim it, scribe it to the wall that’s actually there, and come back if a door starts rubbing. Groundwork Construction Co. of Los Angeles is an independent Cover service provider and is not affiliated with, authorized by, or sponsored by Cover. Most Cover cabinet work across Los Angeles runs $4,720 – $15,340 for installation alone. Call (888) 427-1733 to set up a free estimate.

Call (888) 427-1733

Why Trust Groundwork Construction Co. of Los Angeles for Your Cover Construction?

Our technicians have up to 12 years of experience, and a good share of it has been spent on frameless, full-overlay cabinetry exactly like the Cover line. That matters because Cover boxes fail in ways that reward familiarity: a hinge plate that’s pulled out of an MDF side, a filler that’s been forced flat against a bowed plaster wall, a quartz seam that opened because the run underneath it wasn’t level.

We source OEM and OEM-compatible hardware – hinges, drawer glides, hinge repair inserts, seam adhesive – matched to the specific Cover door and box in your kitchen rather than substituting whatever’s on hand. And because it’s a frameless system, a wrong-glide substitution shows up as a crooked door face within weeks. We don’t do that.

Every Cover project we finish is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Your Cover product warranty stays intact as long as the work is done to spec, and we’re careful about that: we won’t drill a box side without a pilot hole or hang an island off a cabinet that wasn’t designed as one. Calls get answered by a live person, 24/7. Upfront pricing, no surprises, and a written scope before anyone touches a door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Cover Construction Problems We Fix in Los Angeles

These are the Cover failures we see most often in Los Angeles homes. Each one has a real cause, and each one is usually fixable without tearing out the kitchen.

  • Hinge screws pulling out of the box sides. On the Cover frameless full-overlay line, hinge plates are driven directly into the particleboard or MDF side panels. Load a cabinet past spec, or drive a hinge without a pilot hole, and the screw loses its bite, the door sags, and eventually the two doors below it stop meeting at the reveal.
  • Quartz seams and backsplash joints opening or chipping. The Cover quartz countertop program – typically set over an undermount stainless or composite sink – fails at the seam when the cabinet run underneath wasn’t level or the seam adhesive was wrong for the material. You’ll see a hairline opening near the sink cutout first, because that’s where movement concentrates.
  • Sink-base and dishwasher-adjacent boxes swelling and delaminating. Slow leaks and wet-mopping the toe kick are the two culprits. Particleboard swells and doesn’t come back, so the door gaps widen and the box edge goes soft to the touch.
  • Frameless runs going out of square against out-of-plumb LA walls. Century-old bungalows in the flats and postwar stucco tract homes rarely have a straight wall. A run installed level and plumb to itself but never shimmed and scribed to the actual wall shows up as gapping end panels and doors that rack and rub within a season or two.
  • Island and peninsula cabinetry that shifts in galley-to-open-plan conversions. When a Load-bearing wall comes out and Cover island units go in, the new slab or subfloor movement telegraphs into the toe kick and the quartz. Islands that aren’t anchored to the floor properly walk a few millimetres and the counter joints pay for it.

Cover Parts & Our Repair-vs-Replace Approach

Cover boxes and doors are best matched with OEM or exact-fit replacement doors, hinges and drawer glides. That’s not loyalty talking – it’s the only way the frameless alignment holds. A glide with the wrong travel or a hinge with a slightly different cup depth will throw every door below it out of line. Where OEM hardware isn’t available, quality aftermarket soft-close hardware is a reasonable upgrade, and we’ll tell you plainly when we’re going that route.

We order parts per job to the exact Cover model and door series in your kitchen. We don’t claim to stock Cover parts in Los Angeles, and anyone who says they do is probably handing you something universal.

The repair-or-replace call is usually straightforward. Hinge, glide and door-face problems are repair work almost every time. A swollen sink base or a failed quartz seam often points to replace-and-relevel rather than patch, because you can’t un-swell particleboard and you can’t glue a seam back onto a run that’s still moving. Call (888) 427-1733 for a free estimate and we’ll give you the honest version of that answer for your kitchen.

Our Cover Service Process – Step by Step

  1. 1
    Diagnosis. We check the run for level and plumb against the wall, not just against itself. Doors come off and hinge plates get inspected for pulled screws and stripped inserts. The sink base gets checked for moisture with a meter, and quartz seams get checked for opening and for lippage between slabs.
  2. 2
    Scope and quote. You get a written, line-item scope: which cabinets get repaired, which get replaced, what hardware goes in, and where the counter has to come up to fix what’s underneath. Upfront pricing, no surprises.
  3. 3
    Repair or install. Pulled hinge screws get repaired with proper inserts rather than a bigger screw. Out-of-square runs get re-leveled, re-shimmed, and the fillers and end panels re-scribed to the wall. New Cover installs get set level, plumb and square to the room, with the counter templated only after the run is signed off.
  4. 4
    Test and adjust. Every door and drawer gets cycled. Reveals get set even. Soft-close gets tuned. Seams get checked again after the counter has had time to settle.
  5. 5
    Warranty. The work is covered by our 730-Day Done Right Promise, and we leave you with the paperwork in writing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Cover Products We Service & Install in Los Angeles

We work on the Cover frameless full-overlay cabinet line in both slab and shaker door styles, which covers most of what’s in Los Angeles kitchens. Beyond that: the Cover quartz countertop program, including undermount stainless and composite sink installs and seam work; Cover vanity and linen cabinet units in bathroom layouts; and Cover island and peninsula cabinetry, which comes up often in galley-to-open-plan conversions where a wall has come down. Bathroom vanities and kitchen runs get the same treatment – leveled, shimmed, scribed, and checked against the wall before anything goes on top.

We Also Service These Brands

We’re not a single-brand shop. Alongside Cover, our technicians work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures – which matters in a Los Angeles kitchen where a Cover cabinet run sits under a Cambria top with a Kohler sink in it. You get one contractor across the trades, from foundation to finish line, instead of three subcontractors pointing at each other when a seam opens.

FAQs – Cover Construction Service in Los Angeles

Cover Project Typical Cost Range
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Backsplash Installation $945 – $2,950
Kitchen Island Installation $3,540 – $11,800
Small Kitchen Remodel $10,620 – $23,600
Kitchen Remodel $16,520 – $53,100
Bathroom Vanity Installation $945 – $3,540
Small Bathroom Remodel $5,900 – $14,160

Call (888) 427-1733 for an exact quote on your Cover project – estimates are free, and financing at 0% for 18 months is available.

Book Your Cover Service in Los Angeles, CA

Whether it’s a racked cabinet run, an opening quartz seam or a full Cover kitchen install, we’ll scope it honestly and put the price in writing. Groundwork Construction Co. of Los Angeles answers the phone live, 24/7, and every project is covered by our 730-Day Done Right Promise. Call (888) 427-1733 to schedule your free estimate and design consult.

Written by the team at Groundwork Construction Co.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch