A Groundwork company - serving Los Angeles, CA

Dvele Construction Service in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Los Angeles Homeowners Choose Dvele Construction

Groundwork Construction Co. of Los Angeles provides independent construction, remodel and repair service for Dvele modular and panelized homes across the city. What sets our Dvele work apart is that we read the factory drawings and panel schedules ourselves instead of working from a dealer’s summary, so marriage walls, panel splices and roof interfaces get detailed the way the assembly actually behaves. We are an independent Dvele service provider, not affiliated with or authorized by Dvele. For a free estimate on Dvele work in Los Angeles, call (888) 427-1733.

Call (888) 427-1733

Why Trust Groundwork Construction Co. of Los Angeles for Your Dvele Construction?

Dvele homes are not stick-built houses with a different label. The wall panels arrive closed, the envelope is built to perform tight, and the mechanical equipment is heat-pump based. Our technicians have up to 12 years of experience and have worked through that delivery model repeatedly, which means we know where the joints are, how the finish packages were dimensioned, and which connections need attention after the modules land on site.

For components that affect how the assembly performs, we match factory-specified parts: envelope sealants, gaskets, connectors and mechanical equipment get OEM or exact-equivalent replacements so the wall and roof systems keep working as designed. Your Dvele documentation stays intact because we don’t substitute parts that change the assembly. Every project we take on is covered by the 730-Day Done Right Promise. If the work isn’t done right, we make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Fix in Los Angeles

These are the issues we see most on Dvele homes in Los Angeles, and what actually causes them:

  • Marriage-wall and panel-splice movement. On Dvele fully modular homes, the seam where two modules meet is the first place trouble shows. A hairline crack that telegraphs through drywall, or a slight draft along the joint, usually means the factory gasket and sealant detail has worked loose or was under-sealed during site finishing. Los Angeles’s seasonal ground movement makes that seam worth watching.
  • Factory finish-package mismatch on site. Dvele’s custom-configured series ships kitchen and bath finish packages dimensioned to factory tolerances. Field conditions rarely match those numbers exactly, so cabinets, countertops and tile need shimming, re-cutting or reordering. We plan for that tolerance gap before demo starts, not after the stone is cut.
  • Under-sealed envelope and mechanical penetrations. Heat-pump, ERV and plumbing penetrations through Dvele’s tight wall assemblies get missed during site finishing more often than anyone expects. The result is drafts, condensation on interior surfaces, and blower-door readings that don’t hold. Small gaps in a high-performance envelope cost real performance.
  • Roof and flashing interfaces. Where factory roof sections meet site-built connections, flashing is a common leak point on modular and panelized homes. Southern California rain events find those weak spots fast, especially on Dvele homes sited in the hills where wind-driven rain hits at an angle.
  • Net-zero-ready package tuning. Dvele’s high-performance home package runs on heat-pump mechanicals and a very tight envelope. When those systems are commissioned without verifying the envelope first, the equipment gets blamed for problems the sealant detail caused. We test the envelope before we touch the mechanicals.

Dvele Parts & Our Repair-vs-Replace Approach

Parts for a Dvele home split into two categories, and we treat them differently. Envelope sealants, gaskets, connectors and heat-pump equipment get OEM or exact-equivalent parts. Finish items like tile and plumbing fixtures can come from quality aftermarket sources without affecting how the assembly performs.

We source what each job actually needs rather than promising inventory we don’t keep. If a component has to be ordered to match the factory spec, we tell you the lead time upfront and build it into the schedule.

Repair comes before replacement whenever the Dvele structure and panel system are sound. A cracked marriage-wall seam gets opened, re-sealed and refinished. A failed flashing detail gets rebuilt. Full replacement is reserved for assemblies that have genuinely failed, and we’ll show you why before you spend the money. Call (888) 427-1733 to talk through what you’re seeing.

Our Dvele Service Process – Step by Step

  1. 1
    Diagnosis. We review your Dvele drawings and panel schedule against what’s actually in the house, then inspect the specific joint, penetration or finish package in question. On envelope concerns, we run a blower-door or moisture check before recommending scope.
  2. 2
    Repair or install. We re-establish gaskets and air-and-water seals, shim and re-fit factory finish packages to field conditions, and detail roof interfaces to the assembly’s intended spec. Live people answer our phones 24/7, so scheduling doesn’t stall.
  3. 3
    Test. Every envelope or roof repair gets confirmed before it’s closed up. We verify the seal holds and document what we found.
  4. 4
    Warranty. The finished work is backed by our 730-Day Done Right Promise. That’s nearly two full years of coverage on workmanship, in writing.

Dvele Products We Service & Install in Los Angeles

We work on Dvele’s fully modular single-family homes built from factory modules with closed wall panels. We service Dvele’s panelized wall and floor panel systems for site-assembled homes, including splice and joint detailing. We handle finish and repair work on Dvele’s high-performance net-zero-ready package, with its tight envelope and heat-pump mechanicals. And we take on remodel and finish-package work on Dvele’s custom-configured home series, where the factory sets the kitchen and bath specification. Kitchens, baths and roof repair are the three scopes we run most often on Dvele homes in Los Angeles.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

We Also Service These Brands

Dvele homes still mix in standard products, and we handle them. KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures are brands we work with regularly across Los Angeles. That means a Dvele kitchen remodel or bath renovation can run through one point of contact, from factory panel detailing to the finish brands you actually chose.

Your Dvele Kitchen, Bath and Roof Work in Los Angeles – What It Costs

Most Dvele projects in Los Angeles fall into three buckets: full kitchen remodeling, full bathroom remodeling and roof repair. Here’s what those scopes typically run in this market, priced as ranges because every Dvele floor plan differs.

Service Typical Los Angeles Cost Range
Kitchen Remodel $16,520 – $53,100
Bathroom Remodel $10,620 – $33,040
Roof Repair $470 – $2,125
Roof Replacement $9,440 – $23,600
Metal Roof Installation $17,700 – $47,200

Los Angeles adds cost pressure that other markets don’t have. Hillside sites in the Santa Monica Mountains and Hollywood Hills need drainage and grading work priced in, and roof materials in wildland-urban-interface zones increasingly have to meet ignition-resistant standards. We quote those line items upfront rather than discovering them mid-job. Upfront pricing, no surprises. A $1,000 discount applies on projects over $10,000, and 0% financing for 18 months is available.

A typical scenario runs like this: on a Dvele modular or panelized home, a homeowner notices a hairline crack or slight draft along a marriage wall or panel splice, or a ceiling stain near where roof sections join. The usual cause is a factory joint detail that has worked loose or been under-sealed during site finishing, not a structural failure. A qualified local pro opens and inspects the seam, re-establishes the gasket and air-and-water seal, repairs and refinishes the drywall, and confirms the envelope with a blower-door or moisture check before closing it up.

FAQs – Dvele Construction Service in Los Angeles

Book Your Dvele Service in Los Angeles, CA

Whether it’s a kitchen remodel, a bathroom renovation or a roof repair on your Dvele home, Groundwork Construction Co. of Los Angeles handles it with factory-informed detailing and the 730-Day Done Right Promise behind the work. Call (888) 427-1733 for a free project estimate and design consult. Live people answer, day or night.

Written by the team at Groundwork Construction Co. of Los Angeles.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch