Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterStanding Seam Metal Roof in Los Angeles, CA
A standing seam metal roof in Los Angeles typically costs $24,000 to $58,000 for a full residential install, depending on square footage, panel gauge, and how much decking or framing needs correcting underneath. It’s the roof type most Angelenos ask about after a string of dry winters followed by one heavy El Niño season, because it’s the one roof that shrugs off both. Standing seam means the panels are joined by raised seams that stand above the flat of the metal, with hidden fasteners so there’s nothing exposed to back out or rust through. We install them across Los Angeles on everything from 1920s Spanish bungalows in Echo Park to flat-roofed Mid-City fourplexes built in the 1980s.
Groundwork Construction Co. of Los Angeles handles this as part of our Roofing line, which means the same crew-level standards that cover a shingle tear-off cover a metal panel install: background-checked, uniformed technicians, a written scope before anyone touches your roof, and the 730-Day Done Right Promise behind the workmanship. If a seam lifts or a panel doesn’t sit true, we come back and make it right. Call (888) 427-1733 and a live person answers, day or night, so you’re not waiting until Monday morning for a callback.
Why Standing Seam Makes Sense in This Climate
Los Angeles is a strange place to own a roof. You get roughly 15 inches of rain a year, almost all of it between November and March, and then seven months of unbroken sun that bakes asphalt shingles until they curl and shed granules into your gutters. The San Fernando Valley routinely hits 105°F in August while Santa Monica sits 20 degrees cooler on the same afternoon. That swing, heat up high and marine layer down low, is brutal on petroleum-based roofing. Metal handles it without breaking a sweat. It reflects solar radiation, expands and contracts far less than asphalt, and doesn’t care about the UV index.
The other thing standing seam gives you here is fire resistance. Los Angeles sits inside Very High Fire Hazard Severity Zones in the hills, and a metal roof with a Class A fire rating can matter for insurance and for defensible space requirements. We see a lot of homeowners in areas near the Santa Monica Mountains and the Verdugo foothills get pushed toward metal by their carrier, and honestly, they end up liking it better than the shingle quote they were comparing it to.
When You Need Standing Seam Metal Roof
Most people call us about metal for one of a handful of reasons. If any of these sound familiar, it’s worth a look:
- Your shingle roof is past 18 to 20 years old and starting to fail. In Los Angeles heat, asphalt roofs often age out faster than the 25-to-30-year rating on the package. Curling tabs, bald spots where granules have washed off, and grit in the downspouts are the early signals.
- You’ve patched the same leak twice. Recurring leaks around chimneys, skylights, or valley transitions usually mean the underlayment is gone, not just the top layer. Metal panels with proper flashing details stop the repeat cycle.
- You’re in a fire zone or your insurance carrier is asking questions. A Class A metal assembly and a noncombustible roof surface can help with underwriting in the hills and canyon neighborhoods.
- You’re adding solar and want a roof that outlasts the panels. Standing seam is the easiest surface to mount solar on because clamps attach to the seams without drilling through the panel, which protects the warranty on both.
- You’re tired of heat gain into the attic. A cool-rated metal roof with the right underlayment keeps the attic cavity noticeably cooler in July and August, which shows up on your power bill.
- You want to stop re-roofing. A properly installed standing seam roof with 24-gauge panels is a 40-to-50-year roof in this climate. It’s usually the last roof the house gets during your ownership.
Our Standing Seam Metal Roof Process
Metal is less forgiving than shingle. A panel that’s cut wrong or a seam that isn’t crimped properly shows up in the first rain season. Here’s how we run the job:
- Inspection and deck assessment. We walk the roof, check the sheathing for soft spots, and photograph the underside from the attic where we can access it. If the existing decking is older 1×6 skip sheathing under a 1920s bungalow, we factor in a re-deck with plywood before any panel goes down.
- Written scope and upfront pricing. You get the same number on the estimate that appears on the final invoice. No “we discovered something” surprises mid-job unless you sign off on a change order first. That’s the upfront pricing standard across every Groundwork job.
- Tear-off and underlayment. Old roofing comes off down to the deck. We install a high-temp synthetic underlayment rated for metal roofs, plus ice-and-water shield at valleys and penetrations. On Los Angeles builds where the panels sit close to the deck, the underlayment is doing real work.
- Panel layout and install. Panels are roll-formed or factory-cut to length, lifted, aligned, and fastened with clips at the seams so the metal can move with temperature without backing out fasteners. Seams are crimped in place. Flashing around chimneys, vents, and wall transitions is custom-fabricated, not bent from a stock piece.
- Ridge, trim, and gutters. Ridge caps, rake trim, and gutter apron go on, and we check that water has a clean path to the downspouts. In Los Angeles, one clogged scupper during a February storm can push water under the panels, so this step matters.
- Final walk and warranty. We walk the roof with you, show you the seams and flashing, hand over the material warranty documentation, and register the workmanship under the 730-Day Done Right Promise.
Standing Seam Metal Roof Pricing in Los Angeles
Metal roof pricing in Los Angeles runs higher than most of the country because of labor rates, permit costs, and how much of the housing stock sits on older or irregular framing. Here are realistic ranges we see on actual jobs in the city:
| Line item | Typical Los Angeles range |
|---|---|
| Standing seam install, 24-gauge steel, per square (100 sq ft) | $1,100 to $1,800 |
| Standing seam install, aluminum or copper, per square | $1,900 to $3,400 |
| Full residential roof replacement, 1,500 to 2,000 sq ft | $24,000 to $46,000 |
| Full residential roof replacement, 2,500 to 3,200 sq ft | $38,000 to $58,000 |
| Tear-off of existing shingle roof | $4,000 to $9,000 |
| Re-deck over old skip sheathing (Plywood) | $3,500 to $8,500 |
| Custom flashing and chimney work | $800 to $3,500 |
| Permit fees (varies by zone and scope) | $400 to $1,400 |
What pushes a Los Angeles metal roof toward the top of that range? Complex roof geometry (multiple hips, valleys, or a turret on a 1920s Spanish colonial), a steep pitch that slows the crew, copper or aluminum instead of steel, and any structural correction needed. What keeps it lower? A simple gable, a roof that’s already been re-decked, and a single-story house with an easy laydown area for the panels.
Every number above comes from a written estimate after we’ve actually looked at your roof, not from a phone guess. The estimate and design consult is free, and if the project runs over $10,000 you get $1,000 off, plus 0% financing for 18 months if you want to spread the cost. That’s how we make a 40-year roof affordable without pretending it’s cheap. Call (888) 427-1733 to get the number.
What to Know Before You Commit to Metal
Three things we tell every Los Angeles homeowner before they sign:
- Noise isn’t the issue people think it is. Solid decking plus underlayment kills most of the rain noise. The “drum effect” people worry about comes from panels installed over open purlins with no solid deck, which isn’t how we build.
- Panel gauge matters. 24-gauge steel is the standard for residential. 26-gauge is thinner and cheaper and shows oil-canning (waviness) on long panels. We spec 24-gauge unless a specific design calls for otherwise.
- Seams, not fasteners, are the system. The whole point of standing seam is hidden clips. If a contractor proposes exposed screws, that’s an exposed-fastener metal roof, not standing seam, and it’s a different product with a different lifespan.
If you’re also thinking about the rest of the house (windows, doors, or an addition), it’s worth looking at how roofing ties into the full scope. Our Roofing page covers the shingle, tile, and flat-roof options that pair with metal, and the home page lays out the seven service lines we run under one contract. Some of our Los Angeles clients choose modular builders like Abodu or Cover when they’re adding an ADU and want the roof spec to match the main house; we coordinate the roof scope so the metal reads the same on both structures.
FAQ – Standing Seam Metal Roof
How long does a standing seam metal roof last in Los Angeles?
A 24-gauge standing seam roof lasts 40 to 50 years in Los Angeles with normal maintenance, and often longer on homes away from the marine salt air. Coastal properties within a mile or two of the ocean see faster finish wear but the panels themselves hold up if the coating is maintained. Compare that to the 18-to-22-year real-world life of an asphalt roof in our heat, and the math flips in favor of metal over a 30-year horizon. Call (888) 427-1733 for a lifespan estimate specific to your roof and location.
Is a metal roof too loud in the rain?
No, a standing seam metal roof over solid decking and underlayment is not noticeably louder than shingle inside the house. The noise myth comes from old barn-style installations over open framing. When panels sit on continuous sheathing with high-temp underlayment, rain reads as a soft drumming, not a roar. If you have vaulted ceilings with no attic buffer, we can add a sound-dampening layer. Ask us about it during the estimate.
Will a metal roof raise my homeowner’s insurance in Los Angeles?
Usually not, and in fire hazard zones it often lowers it. Carriers commonly discount premiums for Class A fire-rated roofs, and metal is noncombustible. The exact impact depends on your carrier and zone, so ask them to quote it both ways. We provide the material spec sheet and fire rating documentation you’ll need for that conversation. Call (888) 427-1733 and we’ll send what your carrier needs.
Can you install a standing seam roof over my existing shingles?
We don’t recommend it, and we won’t do it. Standing seam needs a flat, solid deck to sit on, and the panels need correct clip spacing that only comes with a clean deck. Installing over old shingles also hides soft sheathing and voids most material warranties. We tear off to the deck, inspect, and rebuild. That’s why our metal quotes run higher than the guys who offer to skip tear-off: the roof actually lasts when we’re done.
How much does a standing seam metal roof cost in Los Angeles?
Most full residential standing seam installations in Los Angeles land between $24,000 and $58,000 depending on square footage, panel material, and site conditions. Per-square pricing runs $1,100 to $1,800 for 24-gauge steel and $1,900 to $3,400 for aluminum or copper. The estimate is free, we give you a firm written number before any work begins, and projects over $10,000 get $1,000 off plus 0% financing for 18 months. Call (888) 427-1733 for your exact price.
Can you install a metal roof on a flat roof in Los Angeles?
Yes, but it’s a different product. Standing seam is pitched-roof work; flat Los Angeles roofs get a low-slope metal system or a membrane assembly. If you have a mixed-roof house (pitched front, flat rear addition, which is common in Mid-City and Culver City), we’ll spec each section separately and match the trim so the whole roof reads as one. Call (888) 427-1733 to walk through your roof geometry.
Why Groundwork Construction Co. of Los Angeles
We’re a full-scope contractor, not a roofing-only outfit, which means the person who quotes your metal roof stands behind the whole project if the work touches framing, windows, or a new addition. Our technicians have up to 12 years of experience on metal and tile systems, they’re background-checked, and they show up in uniform. Our material partners include the brands we trust on the long-horizon side of the business, and our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
We keep our pricing transparent because we’ve watched too many Los Angeles homeowners get a low bid that ballooned by 40% after the deck came off. The number we write is the number you pay. And when something needs your attention at 9 p.m. the night before a storm, a live person picks up.
Get Your Standing Seam Metal Roof Estimate
If your roof is 20 years old, if you’ve patched the same leak twice, or if you’re in a fire zone and your insurance carrier is asking questions, now is the right time to get a real number on a metal roof. Groundwork Construction Co. of Los Angeles will walk the roof, put the scope in writing, and hand you a firm price with no surprises built in. The estimate and design consult is free, and if your project runs over $10,000 you get $1,000 off with 0% financing for 18 months available. Call (888) 427-1733 and a live person answers, day or night.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.