Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Manhattan Beach, CA
We provide independent Therma-Tru service across Manhattan Beach, from the sand-adjacent streets west of Highland to the custom builds pushing inland off Sepulveda. What sets our Therma-Tru work apart here is that we treat doors as systems – slab, frame, sill, and hardware – because Manhattan Beach salt air attacks the hardware long before the fiberglass ever fails. Therma-Tru service is a core part of our windows and doors work, and every job is backed by our 730-Day Done Right Promise. Call (888) 427-1733 for a free estimate.
Why Manhattan Beach Residents Choose Us for Therma-Tru Service
Therma-Tru doors show up in a huge share of Manhattan Beach homes – Smooth-Star on newer custom builds, Fiber-Classic on the 1950s beach cottages that survived the rebuild wave. We know these doors down to the part numbers. When a hinge pinches or a sidelite fogs, we diagnose the actual failure instead of quoting a full replacement. Our technicians have up to 12 years of experience working with fiberglass entry systems on the coast, and we source genuine Therma-Tru OEM hinges, thresholds, sills, and glazing components as each job calls for them. That matters on a street where a knockoff hinge can rust solid in two winters. You get upfront pricing, background-checked and uniformed technicians, and a live person on the phone around the clock. Our Manhattan Beach service area covers both 90266 and 90267, and we’re proud to be an independent Therma-Tru service provider – not manufacturer-affiliated or authorized.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Solve in Manhattan Beach
- Corroded hinge plates and rubbing doors. Standard steel hinge plates and strike hardware corrode within a few seasons in the salt-laden marine air west of Highland. The slab rubs before the fiberglass shows any wear – so we swap to marine-grade or OEM hardware and re-plumb the hang.
- Threshold leaks and wet bottom rails. Winter storm rain driven by onshore wind overwhelms inadequately flashed thresholds and sill pans. Fiberglass slabs wick moisture at the bottom rail and swell or delaminate along the edges if it isn’t caught.
- Peeling factory finishes. The factory-applied Finishing System on Fiber-Classic and Classic-Craft slabs chalks and peels faster on south- and west-facing exposures under coastal UV and wind – especially where a prior recoat skipped proper prep.
- Fogging SDL glazing and air leaks. Simulated Divided Lite grilles and insulated glass units fog or leak at the glazing bead on older door systems. Gaps at the frame-to-wall joint often widen afterward when a raised-foundation bungalow settles.
- Multi-point lock misalignment. Adjustable deadbolt strikes shift after seismic or foundation movement common in older beach cottages, so the door latches high but won’t catch low. That’s a frame-and-hardware job, not a new door.
Therma-Tru Service in Manhattan Beach: What Local Conditions Mean for Your Equipment
Here’s the local fact that changes how a Therma-Tru job gets run: Manhattan Beach construction is dominated by teardown-and-rebuild custom single-family homes on small coastal lots, and those rebuilds frequently reorient the entry door to a new wall line or flip its weather exposure entirely. That means Therma-Tru sill pans and flashing on a new or reworked entry get designed in during framing rather than retrofitted afterward. It’s a sequencing problem inland contractors rarely face, because the lot scrape and custom build is the norm here rather than the exception. On the surviving beach cottages near the Gaslamp and Strand area, the opposite applies – you’re working around a raised foundation and existing stucco, and the salt exposure is already eating untreated steel railings and exterior hardware. Both scenarios reward a crew that plans the door system before the walls close, not after.
Therma-Tru Models & Products We Service in Manhattan Beach
We service the full range of Therma-Tru entry systems you’ll find on the coast: Smooth-Star fiberglass entry doors, the Classic-Craft American Style collection, and Fiber-Classic door slabs. We also work on complete door systems with Simulated Divided Lites and factory-applied Finishing System finishes. Our approach on parts is straightforward. Genuine Therma-Tru OEM hinges, sills, thresholds, and glazing components are the right call for a system under roughly 15 years old, while quality aftermarket sweeps and weatherstrip are fine where OEM stock has been discontinued. We source parts per job rather than claiming local stock, and we tell you honestly when the bottom rail or slab core is waterlogged past repair and a new system beats patching.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Manhattan Beach
Door and window work here ties directly into the broader project. A failed threshold or corroded hardware often surfaces during a Window Replacement ($4,500-$15,000) or an Impact Window Installation ($8,000-$25,000), and storm-damaged flashing around door and window openings usually brings in a Roof Repair ($400-$1,800). What drives your specific cost is the condition of the frame and sill, whether marine-grade hardware is needed, and whether the glazing or slab core has taken on water. A typical coastal job involves an older Fiber-Classic or Smooth-Star entry door on a raised-foundation beach cottage where the threshold leaks in a winter storm and the hinge plates have begun to corrode. A qualified local pro pulls the slab, checks the sill pan and frame-to-wall flashing, replaces the threshold and hinge hardware with marine-grade or OEM parts, and confirms the frame is plumb before reinstalling. If the bottom rail has taken on water and the fiberglass has delaminated, the honest call is a new system.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
| Roof Repair | $400-$1,800 |
Every estimate is free and written line-item, and the number you see is the number you pay. Call (888) 427-1733 for an exact quote.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Manhattan Beach
Usually not. On most Manhattan Beach doors it’s the steel hinge plates and strike hardware corroding from salt air, not the fiberglass slab failing. We replace the hardware with marine-grade or OEM parts and re-plumb the hang. Call (888) 427-1733 and we’ll take a look before you replace a sound door.
The insulated glass unit has lost its seal at the glazing bead, and coastal humidity plus onshore wind speeds that up on older SDL door systems. It’s a glazing service, not a whole-door replacement. Call (888) 427-1733 for a free assessment.
It can. Strict coastal zoning – height limits, floor-area ratios, and setback rules – governs custom builds and reworks here, and widening a rough opening may trigger review depending on the project. We walk you through what the plan allows before any framing opens up.
Only if the sill pan and frame-to-wall flashing are done right. Wind-driven rain finds inadequate flashing and wicks into the bottom rail. We check the sill pan as part of every door service. Call (888) 427-1733 for an inspection before the storms hit.
Yes, when the slab core is sound. The factory-applied Finishing System on Fiber-Classic and Classic-Craft slabs chalks and peels on south- and west-facing exposures, and a proper prep-and-recoat brings it back. If the bottom rail has taken on water, recoating is wasted money – call (888) 427-1733 for an exact quote.
Service Areas Near Manhattan Beach
We also handle Therma-Tru work in Los Angeles, Marina del Rey, Santa Monica, El Segundo, and Palos Verdes Estates. If you’re just over the line from Manhattan Beach, we cover your block too.
Book Your Therma-Tru Service in Manhattan Beach Today
Whether it’s a leaking threshold, corroded hinges, or fogged SDL glass, we diagnose the system and quote it straight. Every job carries the 730-Day Done Right Promise and upfront pricing with no change orders. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles.