Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact Garage Doors in Los Angeles, CA
Impact garage doors in Los Angeles are rated to resist flying debris and wind loads that standard doors can’t, and they matter most in the hillside and wildfire-adjacent neighborhoods where windborne embers and debris are a real seasonal threat. A typical impact-rated single-car door in Los Angeles runs $1,800 to $4,500 installed, while a double-car door with reinforced tracks and heavy-duty hardware lands between $3,200 and $7,800. We install impact-rated garage doors across Los Angeles as part of our Windows & Doors work, and we back every installation with our 730-Day Done Right Promise: if something isn’t done right, we make it right.
Garage doors are the largest moving object on most homes and, in Los Angeles, they’re also the biggest opening a wind event can push against. Standard sectional doors rated for a 90 mph wind zone aren’t the same product as an impact-rated assembly, and the difference isn’t cosmetic. It’s in the gauge of the steel, the reinforced struts, the heavier hinges and rollers, and the track anchors that tie the whole system into the wall framing. Getting that assembly wrong in a high-wind area is the kind of mistake that shows up years later, not at the walkthrough.
Our technicians have up to 12 years of experience installing and servicing impact-rated door systems, and they arrive background-checked and in uniform. Call (888) 427-1733 and a live person answers, day or night, to talk through what your opening actually needs.
Key Takeaways
- Impact-rated garage doors in Los Angeles typically run $1,800 to $7,800 installed, depending on size, material and wind-load rating.
- The door panel is only half the system; tracks, struts, hinges and anchors have to be rated to match.
- Wildfire-adjacent and hillside neighborhoods see the most demand for impact-rated and ember-resistant assemblies.
- Most single-door replacements are completed in one visit; double doors and structural retrofits can take two.
- Every installation is covered by our 730-Day Done Right Promise and priced upfront, with the number you see being the number you pay.
When You Need Impact Garage Doors
Impact doors aren’t a universal upgrade in Los Angeles. Some homes genuinely need them; others just need a properly rated door for the wind zone they’re in. Here’s how to tell which category you fall into. If any of these sound familiar, it’s worth a conversation before the next Santa Ana wind season.
- Your current door is bowing or flexing in wind. If you’ve watched the door panel flex inward during a strong gust off the San Gabriel foothills, the door isn’t rated for the pressure it’s seeing. Flexing stresses the hinges and rollers, and repeated cycles eventually pull the track screws loose.
- You live in a wildfire-adjacent zone. Homeowners in the hills above Glendale, Pasadena, Altadena and the Santa Monica Mountains deal with windborne embers every fire season. An impact-rated door with a tight perimeter seal won’t solve a wildfire problem on its own, but it closes an opening that standard doors leave loose.
- Your garage is attached and shares a wall with living space. Most Los Angeles homes have an attached garage, and an impact-rated door assembly reduces the chance of structural breach that lets wind-driven debris into the house proper.
- The track is pulling away from the jamb. Look at the screws holding the vertical track to the wall. If they’re backing out, stripped, or sitting in crumbling stucco (very common on older Los Angeles homes), the door isn’t anchored to anything rated, and no panel upgrade will fix that.
- You’re rebuilding after a loss or a major remodel. Insurance-driven rebuilds and additions often require the garage opening to meet current wind-load requirements. If you’re already in a project, it’s cheaper to do the door correctly now than to revisit it.
- Your door is old, single-pane, and uninsulated. An uninsulated steel door on a west-facing garage in the San Fernando Valley radiates heat into the house for hours. An insulated impact door cuts that transfer and holds up better under thermal cycling.
For a broader look at how garage doors fit into the full exterior envelope of a Los Angeles home, our home page lays out how we approach each trade.
Our Impact Garage Doors Process
Impact installations aren’t a swap-and-go job. The door panel is one component in a rated assembly, and the assembly is what has to perform. Here’s how we run the work from first call to final walkthrough.
- On-site assessment and measurement. We measure the rough opening, inspect the header and jambs, and check whether the wall framing behind the track is actually solid. On older Los Angeles homes, we frequently find stucco over furring strips with no real structural backup, and that changes the anchoring plan before we order anything.
- Wind-load and exposure review. We look at the exposure of the opening (uphill, downhill, cross-wind) and match the door and hardware rating to what the site actually experiences. A door rated for a mild inland exposure isn’t the right product for a hillside home facing a cross-canyon gust pattern.
- Upfront written pricing. You get a line-item quote that lists door, tracks, struts, hinges, rollers, springs, anchors and labor separately. The number you see is the number you pay. No add-ons mid-job, no surprises at the end.
- Removal and prep. We pull the old door and tracks, inspect the jamb for rot (common where sprinklers hit the lower jamb), and repair or sister framing as needed. Anchor plates get set into solid material, not just stucco skin.
- Installation of the rated assembly. New tracks, reinforced struts, rated hinges and rollers, and a spring system sized to the actual door weight. Springs are under real tension and are the most dangerous part of the job; that’s work for a trained technician, not a weekend project. We don’t hand homeowners a DIY path into a loaded torsion spring, and we don’t recommend anyone else do it either.
- Balance, safety test and walkthrough. We cycle the door, balance it, test the reverse safety feature on the opener, and walk you through the operation, the maintenance schedule and the warranty in writing before we pull out of the driveway.
Most single-door installations are completed in a single visit. Double doors, doors needing structural retrofit, and doors paired with opener replacement can run two days. You’ll know which category you’re in before we start.
If you’re also considering adjoining exterior upgrades, our Los Angeles service area page covers how we coordinate window, door and siding work on the same project so the sequencing doesn’t drag the job out.
Impact Garage Doors Pricing in Los Angeles
Impact garage door pricing in Los Angeles runs $1,800 to $7,800 installed, with the wide range driven mostly by door size, material and the wind-load rating required for your specific opening. A single-car steel impact door in a standard exposure sits near the bottom of that range; a double-car insulated impact door with upgraded hardware, structural retrofit and opener replacement lands near the top. Below is how the components break out for a typical Los Angeles installation.
| Component | Typical Range (Installed) | What Drives the Number |
|---|---|---|
| Single-car impact door (steel, insulated) | $1,800 – $3,200 | Door size, insulation R-value, finish |
| Double-car impact door (steel, insulated) | $3,200 – $5,800 | Door size, insulation, hardware grade |
| Premium impact door (wood-clad, aluminum, glass) | $4,500 – $7,800 | Material, custom sizing, glazing |
| Reinforced track and strut upgrade | $250 – $650 | Span, number of struts, wall condition |
| Structural jamb/anchor retrofit | $400 – $1,200 | Framing condition, stucco depth, access |
| Opener replacement (impact-rated) | $450 – $900 | Type, smart features, backup battery |
| Spring replacement (torsion, pair) | $350 – $650 | Door weight, cycle rating, access |
A few things push the price in Los Angeles specifically. Hillside homes and lots with tight rear-driveway access slow the install and add labor. Older stucco-over-furring construction frequently needs anchor retrofitting that a newer build wouldn’t. And custom sizing for non-standard openings (common in pre-war Los Angeles homes) adds lead time and fabrication cost.
We price every project upfront and in writing. You’ll see the door, the hardware, the retrofit and the labor as separate lines, so you can see exactly where the money goes and where a different door product would save or cost you. When projects exceed $10,000, we take $1,000 off, and 0% financing for 18 months is available to spread the balance without hidden interest.
The estimate and design consult are free. Call (888) 427-1733 and we’ll schedule a visit.
Is it cheaper to repair or replace an impact garage door?
Repair is cheaper when the door panel, tracks and hardware are sound and only a spring, roller, hinge or opener is failing; replace when the panel is dented, delaminated or flexing, or when the tracks are pulling from deteriorated framing. A spring and roller tune-up runs $250 to $500; a full impact replacement runs $1,800 to $7,800. If your door is flexing in wind, no repair will add the structural rating it was never built with. Call (888) 427-1733 for an honest read on which path is right for your door.
FAQs – Impact Garage Doors
How much do impact garage doors cost in Los Angeles?
Impact garage doors in Los Angeles typically cost $1,800 to $7,800 installed, with the range set by door size, material, wind-load rating and whether the jamb needs structural retrofit. A single-car steel impact door runs $1,800 to $3,200 installed. A double-car insulated door with upgraded hardware lands at $3,200 to $5,800. Premium wood-clad or glazed impact doors reach $7,800. Call (888) 427-1733 for an exact quote on your opening; estimates are free.
Do I actually need an impact-rated garage door in Los Angeles?
You need one if your home sits in a high-wind exposure, a wildfire-adjacent zone, or if your current door flexes visibly during Santa Ana wind events. Most Los Angeles homes in interior flatlands don’t strictly need an impact rating for wind, but hillside homes above Glendale, Pasadena and the Santa Monica Mountains almost always benefit, and renewed insurance requirements sometimes push the decision. A free on-site assessment will tell you whether your opening actually needs the rating or whether a properly wind-rated standard door is the better value. Call (888) 427-1733 to schedule.
Can you install an impact garage door in a single day?
Yes, most single-car impact garage door installations in Los Angeles are completed in one visit, typically four to six hours. Double-car doors and doors that need structural jamb or anchor retrofit usually take two days, because the framing work has to cure before the track anchors set. Custom-sized doors need fabrication lead time before the install date. We confirm the expected timeline in writing with your quote. Call (888) 427-1733 to check current scheduling.
How do I know if my current garage door tracks and framing can handle an impact door?
You can’t tell from the surface; the answer is behind the stucco. An impact door is heavier and pushes harder against the track, so the tracks have to be anchored into solid framing, not just the exterior finish. On older Los Angeles homes, we routinely find stucco over furring strips with no structural backup, which means the anchoring system needs to be rebuilt before a heavier door goes on. Our technicians inspect the jamb and header on every estimate and tell you upfront if retrofit framing is needed. Call (888) 427-1733 and we’ll take a look.
Are impact garage doors covered by a warranty?
Yes. Every impact garage door we install is backed by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right, for two full years. That covers the installation, the anchoring, the door adjustment and the hardware we install. Door and hardware manufacturer warranties apply separately and vary by product. If something’s off with your door within that window, call us and we’ll come out. (888) 427-1733, live person, day or night.
What brand of impact door do you recommend?
We don’t standardize on one brand; the right product depends on the opening, exposure and material you want. What we do standardize on is the assembly: whatever door goes on, the tracks, struts, hinges, rollers and anchors get rated to match. On related exterior work we work with partners such as Abodu, Cover and Dvele for accessory structures and exterior systems, and the same premium-partner sourcing principle applies here. Call (888) 427-1733 to walk through door options for your specific home.
Ready for Impact Garage Doors in Los Angeles?
Impact-rated garage doors are a structural upgrade, not a cosmetic one, and the work has to be done by a technician who understands the assembly, not just the panel. Our technicians have up to 12 years of experience on Los Angeles openings, they arrive background-checked and in uniform, and every job is covered by our 730-Day Done Right Promise and priced upfront with no surprises. Call (888) 427-1733 for a free estimate; a live person answers around the clock. We’ll look at your opening, walk you through the right assembly for your exposure, and give you a written number you can count on.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.