Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Los Angeles, CA
An iron fence in Los Angeles usually runs $3,200 to $9,500 for a typical front-yard run, with wrought iron at the higher end and lighter decorative steel at the lower. Most residential jobs we scope are 60 to 120 linear feet of ornamental steel or wrought iron, set in concrete footings, and finished with a powder coat that holds up against the marine layer and dry-season sun. If you’re comparing bids right now, call us at (888) 427-1733 and we’ll walk you through what a fair number looks like for your property.
Iron is the fence Los Angeles homeowners reach for when they want security without giving up curb appeal. It’s the choice for Mid-City bungalows that need a real barrier at the sidewalk, for Hancock Park and Windsor Square properties where an ornamental iron fence is part of the architectural character, and for hillside homes in Silver Lake and Los Feliz where a hedge won’t stop anyone. It’s also what HOAs in Playa Vista and portions of Sherman Oaks tend to approve over chain link or plain wood, because it reads as finish, not utility.
We do this work as part of our Fence Installation practice, which means iron gets scoped alongside everything else that touches your property line: grade, drainage, gates, retaining conditions. Whether you’re on a flat lot in Culver City or a slope above the 101, we survey the same way. Our technicians have up to 12 years of experience, and every project carries the 730-Day Done Right Promise – if it’s not done right, we make it right. That guarantee is one of the longest workmanship guarantees in residential construction, and it’s the reason iron fence jobs we install get a second visit if anything settles or shifts.
Why homeowners call us for iron specifically
Iron is unforgiving. A gate that’s a quarter inch out of plumb swings on its own. A post set shallow leans within two summers of clay-shrink. Powder coat applied over a poorly prepped surface blisters and rusts from the inside out, and by the time you see it, you’re looking at a re-do. The difference between a fence that lasts 30 years and one that fails in 4 isn’t the brand of steel – it’s the survey, the footings, the welding, and the finish prep. We treat all four as one job, not four vendors.
We also bring the same material-first approach to fences that we do to the rest of the house. On our other projects, that means specifying home upgrades with brands like GAF, James Hardie, and Kohler. On iron fences, it means working with fabricators whose welds we can inspect and whose powder coat we can verify, not whatever a supply house has on the floor that week.
When You Need Iron Fence
Most of the calls we get for iron fencing fall into a handful of situations. Here’s what we hear most often in Los Angeles:
- Your current fence failed the “push test.” Wood rots from the bottom in the marine layer, and a fence that looked fine two springs ago can have posts you can rock with one hand. If you’re in Santa Monica or Mar Vista and your wood privacy fence is soft at the base, iron is the replacement that ends the cycle.
- You’ve had a break-in or a near-miss. A gate that latches loosely, a fence with gaps at the bottom, or a side yard that’s visible from the alley all invite problems. Iron with welded pickets and a self-closing gate changes the equation. We’ve done a lot of these in Mid-City and West Adams, where a 6-foot iron fence along the alley is often the single biggest security improvement a homeowner makes.
- Your HOA or a historic district requires it. Some neighborhoods in Hancock Park and Windsor Square have design review that expects ornamental iron at the street frontage. If your existing fence is wood or chain link and you’ve gotten a notice, we can match the proportions of the surrounding homes and work with the drawings you already have.
- You want separation without a wall. Pool fences, side-yard enclosures, and courtyard entries are the other big iron use. Iron lets you keep sight lines and airflow while still meeting the barrier requirements most pool contractors build to. We install a lot of these in Sherman Oaks and Encino, where a pool fence often sits on the same run as a property-line fence.
- A hillside lot needs something the grade won’t move. If your property sits on a slope – common in Silver Lake, Echo Park, and the Hollywood Hills – wood rarely holds up, and chain link looks like a chain link. Iron set in stepped concrete footings follows the grade and stays put.
- You’re replacing a rusted-out fence from a prior owner. Old iron fencing that’s been repainted over rust is a losing battle. Sometimes the fix is a refinish; often it’s a full replacement with better steel and a proper powder coat. We’ll tell you which one your fence actually needs after we look at it.
Our Iron Fence Process
Every iron fence we install in Los Angeles follows the same sequence. No surprises, no “we’ll figure it out on site.” Here’s what to expect:
- On-site survey and property-line check. We walk the run with you, measure existing lot lines, note where the gas, water, and electrical utilities enter the property (iron posts go in concrete, so a mis-located footing is expensive), and photograph the existing grade. We confirm whether any gates need to line up with an existing driveway apron or walkway.
- Design and quote in writing. You get a written scope with linear footage, fence height, picket spacing, post spacing, footing depth, gate type, finish (powder coat color and sheen), and the total price. Upfront pricing is the rule here – the number you see is the number you pay for the scope we agreed on. Any change afterward is a conversation, not a surprise on the invoice.
- Permit and HOA paperwork. The City of Los Angeles requires a permit for fences over 6 feet, and many HOAs require an architectural submittal regardless of height. We pull the permit or review the submittal with you so your new fence doesn’t get flagged after it’s installed.
- Fabrication and finish. Panels and gates are fabricated to the survey, not cut on site from stock lengths. Finish is powder-coated, not field-painted, unless a specific color or touch-up calls for a brush. We inspect every weld and every corner before it leaves the shop.
- Layout and setting. We string-line the run, mark footing locations, and call 811 to confirm underground utilities before we dig. Posts are set in concrete footings, plumbed, and braced so they cure true. On slopes, footings step rather than follow a single plane.
- Install, walkthrough, and warranty handoff. Panels, pickets, and gates go in, hardware is adjusted, and you walk the finished fence with the lead tech. Any punch items get scheduled before we consider the job closed. From that day forward, the 730-Day Done Right Promise covers the workmanship.
If you’d rather have a live person walk you through this over the phone first, we answer calls 24/7 at (888) 427-1733 – no voicemail, no callback queue. A background-checked, uniformed technician shows up for the on-site survey.
Iron Fence Pricing in Los Angeles
Iron fence pricing in Los Angeles varies more than most homeowners expect, mostly because “iron” covers a wide range from thin-wall decorative steel up to true hand-forged wrought iron. The ranges below are what we see for residential jobs in the city, materials and installation included, honest labor, permit preparation, and finish:
| Scope | Typical price range |
|---|---|
| Decorative steel fence, 4 ft, 40-60 linear ft | $3,200 – $4,800 |
| Ornamental iron fence, 5-6 ft, 60-100 linear ft | $5,500 – $8,200 |
| Wrought iron fence, 6 ft, 100-150 linear ft | $8,500 – $14,000 |
| Driveway gate, single swing, iron with remote opener | $3,900 – $7,500 |
| Pedestrian gate, iron, self-closing | $1,200 – $2,400 |
| Post footing replacement (per post, added to existing fence) | $260 – $450 |
| Powder coat refinish (per linear ft) | $38 – $65 |
| Hillside stepped installation, added cost per linear ft | $45 – $95 |
What moves the number one way or another:
- Fence height. Anything over 6 feet typically requires a permit and a heavier gauge post – both add cost.
- Grade. A flat run in Culver City is the cheapest case. A stepped run on a slope in Silver Lake costs more because footing depth and post cuts increase.
- Gate complexity. A swinging gate with a remote opener is a project within the project. A single pedestrian gate is not.
- Finish. Powder coat is standard for new installs. Field-painted wrought iron, common on repairs and refinishes, can run either cheaper (spot touch-up) or more expensive (full prep and re-coat).
- Access. Driveway-width backyards are easy. Tight side yards in older Mid-City homes where a truck can’t fit add a degree of difficulty and usually some labor.
- Existing removal. Hauling off an old fence and disposing of old footings is separate from the new install and gets quoted as a line item.
Every quote we give is a free project estimate, and a design consult comes with it. If the number is bigger than you planned, we can talk through 0% financing for 18 months and $1,000 off projects over $10,000. Those are standing offers, not seasonal – we’d rather solve the budget than lose the job to a vague “call us.”
Call (888) 427-1733 for a free estimate. We’ll give you the real range for your property the same day you request it.
What Iron Fence Costs More Than Wood For – and Why It Still Wins
A wood privacy fence in Los Angeles runs roughly one-third less than iron on the initial install. That’s the true comparison, and we’d rather put it in writing than pretend the number doesn’t exist. What closes the gap over time is lifespan. A well-installed iron fence holds up 25 to 40 years with modest maintenance. A cedar fence in this climate is holding up 10 to 15 with regular staining and post repair. If you’re planning to be in the house for the long haul, iron is the lower total cost – and it’s the only fence that adds a security layer wood and vinyl can’t match.
The other factor is resale. In neighborhoods where iron fences are the norm – Hancock Park, Windsor Square, parts of Pasadena, Manhattan Beach – an iron fence at the street frontage reads as finish. That’s a fact appraisers and buyers tend to notice. We’ve had clients tell us their real estate agent flagged the new fence during a refinance appraisal. Not the reason to install one, but a nice side effect.
What a Good Iron Fence Installed in Los Angeles Looks Like
Los Angeles has a few site conditions that drive fence design here more than in most cities. It’s worth knowing what they are before you compare bids, because a fabricator who’s only worked in, say, the Midwest won’t design for these:
- Marine layer in the coastal corridor. Santa Monica, Venice, and Mar Vista get salt air. Standard steel rusts from the inside out. We spec heavier zinc primer and a powder coat rated for coastal exposure on any job west of the 405.
- Dry-season heat inland. Woodland Hills and the Valley get 100°F+ summers. Powder coat handles that; an inferior finish chalks. We confirm the powder coat’s UV spec on every job where the run is going to sit in full sun.
- Clay and expansive soils. Footings in much of Los Angeles County hit expansive clay that swells and shrinks with the seasons. Post depth and concrete mix matter. A shallow footing will lean within two wet seasons, and no amount of “we’ll come back and look at it” fixes that.
- Alley access and setbacks. Older neighborhoods in Mid-City and West Adams have alleys, which often mean the property line runs along the rear. Iron along an alley is typically the highest-security move a homeowner can make; we work with your survey to put it exactly where it belongs.
- Hillside grades. Silver Lake, Echo Park, and the Hollywood Hills have grades steep enough that a single-plane fence won’t work. Stepped footings add cost but produce a fence that stays vertical for decades.
If your property is in one of these zones, we’ll flag it during the survey and price accordingly. None of these are upgrades you should be learning about after the fence is in the ground.
Gates and Hardware: The Part Most Bids Skip
Iron fence bids in Los Angeles often quote the run and leave the gate vague. That’s where the real variation lives. A pedestrian gate that self-closes has to be weighted correctly, hinged to a post rated for the load, and latched with hardware that doesn’t rattle loose. A driveway gate with a remote opener needs a heavier post (or pair of posts), a low-voltage run for the opener, and a stop in the right place. If you have a pool, gate hardware also needs to meet the same self-closing and self-latching standard your pool contractor is building to.
We spec hardware and gates together with the fence, not as an afterthought. On jobs where a driveway gate is going in at the same time as the fence, the gate hardware is the first thing we finalize, because it determines post placement. Getting that order backwards is how a job goes sideways.
FAQs – Iron Fence
How much does an iron fence cost in Los Angeles?
A typical residential iron fence in Los Angeles costs $3,200 to $9,500 for 40 to 120 linear feet, with a driveway gate and hillside installation adding to that range. Decorative steel lands near the bottom; true wrought iron with a remote gate lands near the top. Call (888) 427-1733 for an exact quote for your property – the estimate is free.
Can you install an iron fence the same day I call?
No – iron fences are fabricated to the property, so a same-day install isn’t realistic. What we can do is get a live person on the phone 24/7, book the on-site survey within days, and give you a written quote before anything is fabricated. The install itself usually schedules two to four weeks after the survey for standard jobs. Call (888) 427-1733 to start the survey.
Do I need a permit for an iron fence in Los Angeles?
Yes, in most cases if the fence exceeds 6 feet in height, and often if it sits within a required front-yard setback. Many HOAs require architectural approval regardless of height. We pull the permit or prepare the submittal as part of the job. Call (888) 427-1733 and we’ll confirm what your specific property needs.
Is iron cheaper than wood over the long run?
Yes – iron costs more up front (roughly three times a wood privacy fence in Los Angeles) but lasts 25 to 40 years compared to 10 to 15 for wood in this climate. If you plan to stay in the house five years or more, the total cost of iron tends to be lower. Call (888) 427-1733 and we’ll run the math for your property against both a wood and iron install.
How long does an iron fence last in Los Angeles?
A properly installed, powder-coated iron fence in Los Angeles typically holds up 25 to 40 years, with an occasional touch-up coat every decade or so. The big factors are footing depth (for our expansive clay soils), powder coat spec (coastal jobs need a heavier grade), and weld quality. Every fence we install is covered by the 730-Day Done Right Promise for the workmanship. Call (888) 427-1733 for a survey and quote.
Why Groundwork Construction Co. of Los Angeles
We’ve been building and installing for Los Angeles homeowners since 2014, and fences are one of seven core trades we handle directly. That matters in small ways – like when your fence footing runs into a paver walkway we installed last year, we already know where the sub-base is – and in larger ways, like having one company accountable from survey to final walkthrough rather than three vendors blaming each other. Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and our brand partners include names like GAF, James Hardie, and Belgard across our other trades. On fences, we apply the same standard to steel and hardware suppliers.
Our 730-Day Done Right Promise covers workmanship on every job we install. If your fence settles, a gate stops swinging true, or a post leans within the coverage window, we come back and make it right. Calls are answered by a live person 24/7 – not a voicemail, not a callback queue. Free project estimates and design consults are standard, and financing runs 0% for 18 months on approved credit, with $1,000 off any project over $10,000.
If you’re ready to talk about iron for your property, call (888) 427-1733. We’ll get a survey booked, get you a written number, and tell you honestly whether iron is the right fence for your lot – not the most expensive one we can sell you.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.