Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Los Angeles Owner’s Guide
KraftMaid-compatible kitchen remodeling projects in Los Angeles typically run $16,520 – $53,100 installed, depending on cabinet line, countertop material, and layout changes, and a full install is a scheduled multi-week project, not a same-day swap. If you’re reading this because a drawer box has cracked, a door hinge has pulled loose from the face frame, or a pull-out no longer glides, you’re in the right place. KraftMaid builds to a handful of distinct cabinet constructions, and the part that fits one line will not fit another. Most owners discover the failure at the worst moment: a soft-close drawer that slams, a door that hangs crooked, or a lazy Susan that grinds halfway around. We match the right component to your specific KraftMaid cabinet and install it as part of the broader kitchen work under our 730-Day Done Right Promise.
Which KraftMaid Models This Applies To
KraftMaid’s product family breaks into several construction lines, and the compatibility question starts there. Raised-panel and recessed-panel framed cabinets use different hinge plates and door thicknesses than their slab and full-overlay lines. Drawer boxes differ too: older KraftMaid builds used sidemount slides on a specific box height, while newer lines use undermount soft-close slides that require a different box profile and bottom panel. Getting the part right means identifying three things before anything is ordered: the interior width and depth of the opening, the hinge or slide series stamped on the existing hardware, and the door or drawer front thickness. If the label inside the cabinet door is gone (and on older kitchens it often is), we measure the opening and match it to the hardware series. On the OEM-versus-aftermarket call, our take is straightforward: buy original KraftMaid components when the cabinet is under warranty or the front is a custom finish, because color match and slide fitment matter. For an out-of-production box, a quality aftermarket drawer box built to the measured opening is often the more durable choice. Groundwork Construction Co. of Los Angeles is an independent service provider and not affiliated with KraftMaid; we source and install components for Los Angeles kitchens every week, alongside Cambria, Silestone, and Kohler finishes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- The drawer slams instead of gliding shut. The soft-close damper in the slide has worn out, and on a full-overlay box in Los Angeles humidity the plastic gears strip before the steel does.
- A door won’t close flush or hangs at an angle. The hinge plate has loosened from the face frame, or the cup has pulled through a screw hole that’s now oversized.
- The drawer box wobbles or the bottom sags. The box joint or the bottom panel groove has failed, usually after years of a heavy pull-out loaded past its rating.
- A pull-out or lazy Susan grinds halfway around. The turntable bearing or the slide’s race has corroded or lost a detent.
- The finish peels at the edge of a door or drawer front. Moisture has gotten under the edge banding near a sink or range, and the front needs replacement rather than a touch-up.
What fails first depends on the line and the room. In kitchens near the coast, we see slide corrosion and finish blistering inside five to seven years. Inland, heat and dry air are harder on face-frame joints and door alignment.
Replacement Cost & What’s Included
For reference, a full Los Angeles kitchen remodel runs $16,520 – $53,100 installed, while Cabinet Installation alone is $4,720 – $15,340, Countertop Installation $2,360 – $7,670, Backsplash Installation $945 – $2,950, and Kitchen Island Installation $3,540 – $11,800. A single part replacement is far less than a full job, but the range moves on the number of boxes and fronts, whether the finish is a stock color or a custom one, and whether we’re matching an out-of-production line. What drives the spread is parts and labor together: the component, the trip, the fit-up, and the disposal. We quote the number up front and the number you see is the number you pay. Every install is backed by our 730-Day Done Right Promise, and we offer 0% financing for 18 months with $1,000 off projects over $10,000 if the work grows into a wider kitchen update.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: confirm the cabinet opening measurements, note the hinge or slide series on the existing hardware, and photograph the label inside the door before it’s lost. Where DIY goes wrong is removing a door or drawer box to measure it and putting it back with the screws in the wrong hole, or swapping a slide series and stripping the box. If a door won’t close or a box is wobbling, stop before you force it, because a stripped screw hole in the face frame turns a small fix into a repair job. Call us at (888) 427-1733 and we’ll tell you straight whether it’s a part swap or a broader fix. Most part swaps we handle in a single visit once the right component is in hand.
FAQs
How long does a KraftMaid drawer box or hinge last in Los Angeles? Plan on five to seven years for slides and hinges in coastal kitchens, longer inland. Soft-close mechanisms wear out first because the damper is plastic. We quote exact replacement when one is failing. Call (888) 427-1733 for a free estimate.
Can the failing part be repaired instead of replaced? Often yes for a loose hinge, which just needs the plate re-set in a fresh hole. A stripped slide or cracked drawer box is usually cheaper to replace than repair. We’ll give you the honest answer in one visit. Call for a free estimate.
How long does the swap take? A single hinge or drawer box swap is typically done in one trip, usually under an hour once the part is matched. Multi-box or door-front replacement depends on the finish and can run longer. Call (888) 427-1733 to get a firm timing.
How do you source the part? We measure the opening and label the existing hardware, then order the matching KraftMaid component or a quality aftermarket equivalent built to that opening. We confirm the color and finish before ordering. Call us to start the free estimate.
Talk to Groundwork Construction Co. of Los Angeles
Whether it’s a single drawer box or a full KraftMaid kitchen update across Los Angeles, we’ll look at the failing part, tell you what it needs, and put the price in writing. Projects come with our 730-Day Done Right Promise, upfront pricing, and 0% financing for 18 months with $1,000 off projects over $10,000. Calls are answered by a live person 24/7, and our technicians have up to 12 years of experience. Call (888) 427-1733 to schedule your free estimate and design consult today.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.