A Groundwork company - serving Los Angeles, CA

KraftMaid Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Driveway & Pavers: The Los Angeles Owner’s Guide

We install and repair KraftMaid-compatible driveway and paver assemblies in Los Angeles, and most full paver driveway replacements here run $8,260 – $21,240 installed, including tear-out, base, and finish. Concrete driveways land at $5,310 – $14,160, and repair-type work is usually wrapped up in a single visit once we’ve seen the failure. We’re an independent service provider and not affiliated with KraftMaid.

Call (888) 427-1733

Owners usually find out something’s wrong the same way every time. A paver shifts an eighth of an inch after a rainy week in the Valley, the mortar joint between a walkway and the driveway starts crumbling, or an efflorescence haze appears on the surface that won’t scrub off. Then a trip-and-stumble at the driveway apron becomes the moment it stops being cosmetic. In our experience across Los Angeles, the tell is often the joint, not the paver.

Which KraftMaid Models This Applies To

KraftMaid’s hardscape line covers interlocking pavers, driveways, walkways, and patio systems sold under their specification and trade programs rather than a single consumer SKU. That matters for you because the compatibility question isn’t “which model number?” – it’s “which profile and thickness sits under my driveway?” We match on three things: nominal paver dimensions (typically 60mm for pedestrian and 80mm for vehicular driveways), the interlocking profile, and the binder/mortar system used at the joints.

To identify yours, look first at the edge of the apron or a lifted corner. Most KraftMaid pavers carry a molded identifier on the underside or a stamped mark at the edge. If the part is a mortar or joint system, the bag or the original installer’s spec sheet is the source of truth. Where there’s no label, take a photo with a tape measure across the paver face and thickness – five minutes in a driveway in Los Angeles will usually answer the compatibility question for us.

On the OEM question: we source OEM KraftMaid parts where a matching run matters, so the new paver doesn’t stand out from the existing field. For visible-but-not-face pavers, or for base and joint materials, a quality aftermarket equivalent is often the right call and the one most homeowners choose once they see the line-item. We don’t claim we stock parts on a truck, and we won’t pretend a discontinued profile is off the shelf. We confirm availability before quoting.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Driveway & Pavers Is Failing

  • Paver rocking or a hollow sound underfoot. The base layer has lost compaction or a joint has failed and let water migrate under the surface. In Los Angeles, this is a slow, invisible problem until the first real winter rain accelerates it.
  • Crumbling joints or loose sand. Binder or joint sand has washed out. This is the single most common cause of paver failure in Southern California, and it’s usually fixable without touching the pavers themselves.
  • Settling at the driveway apron where it meets the street. Often a drainage or compaction issue rather than a paver defect. It shows up as a lip at the curb and a trip hazard for anyone walking to the car.
  • White efflorescence haze. Mineral salts brought up by moisture cycling through the surface. Not a structural failure, but persistent efflorescence usually signals water getting where it shouldn’t. It’s worth a look.
  • Chips, cracks, or a paver that won’t stay flat despite re-sanding. Typically a support failure, a freeze-thaw-adjacent thermal shift, or the wrong thickness profile used in a vehicular area. In that case, the fix is the paver and the base under it, not just the paver.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed cost for KraftMaid-compatible driveway and paver work in Los Angeles depends on the profile and the base condition. Here’s how the ranges sit in this market:

  • Paver driveway installation: $8,260 – $21,240
  • Concrete driveway installation: $5,310 – $14,160
  • Asphalt driveway paving: $4,130 – $10,620
  • Driveway replacement: $5,900 – $16,520
  • Paver patio installation: $4,130 – $12,980
  • Driveway sealing (maintenance): $295 – $825

What drives the range: tear-out and disposal, base repair (the biggest wild card – a failing base under a “replacement” job turns into excavation), paver thickness and profile, drainage correction, and whether the job fronts a street apron that needs the permit. Parts and labor are always quoted line by line, never blended into a single number. The work is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. With $1,000 off projects over $10,000 and 0% financing for 18 months, the higher end of Los Angeles paver driveway pricing is more reachable than the number suggests.

DIY or Call Us?

Here’s the honest split. You can absolutely check the surface yourself: walk the driveway with a heel and listen for hollow spots, photograph the edges, sweep a joint to see how deep the sand has gone, and note whether water is draining toward or away from the house. That’s information we want in hand before we quote.

What goes wrong with DIY is the base. A paver or joint replaced over a failed base looks right for a month and then moves again, and that’s before we talk about edge restraint, which most owners don’t realize is doing half the work of holding the driveway together. A lifted paver on a slope or at the apron is also a possible trip hazard – deal with it before someone’s knee finds it. If you’re not sure which failure you’re looking at, call (888) 427-1733 and we’ll help you sort it out over the phone. Lines are answered by a live person 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch