A Groundwork company - serving Los Angeles, CA

KraftMaid Home Additions & ADU in Los Angeles, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Home Additions & ADU: The Los Angeles Owner’s Guide

We build and finish home additions and ADUs in Los Angeles using KraftMaid cabinetry and compatible component systems, and the installed range for an addition runs $53,100 – $153,400, with detached and larger ADU builds running higher. These aren’t repair parts in the garage-door sense, they’re the cabinets, mobile-home-grade hardware, trim and finish components that wear, loosen and fail inside your addition over time. Owners usually find out when a KraftMaid drawer glides off its track, a cabinet door won’t stay closed past 80 degrees, a cabinet box pulls away from the wall studs, or a soft-close hinge goes slack and slams. All projects we complete are covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We’re an independent service provider and not affiliated with KraftMaid.

Call (888) 427-1733

Which KraftMaid Models This Applies To

KraftMaid’s semi-custom lines show up in Los Angeles additions under three common labels: the door style name (Maple, Oak, Cherry, Hickory, and a handful of thermofoil and painted finishes), the cabinet series, and the hinge/blumotion brand stamped inside the door. Pull the door open and look for a sticker on the interior side panel or back of the box. Write down the exact door style name, the cabinet width, the hinge brand (Blum, Grass, or a KraftMaid-stamped brand), and whether the drawer glides are side-mount or undermount. That combination is what a supplier matches against. Here’s the gotcha most owners miss: KraftMaid has changed hinge patterns and glide styles across production runs, so a door style name alone is not enough. Two cabinets sold as “same style” can carry different screw spacing. Measure the hinge cup bore (35mm is standard, but offset varies) and the screw hole centers before you order anything.

The OEM-versus-aftermarket call is where you decide how much this costs. Genuine KraftMaid replacement hinges and glides match exactly and carry the factory finish, but they cost more and take longer to arrive. Quality aftermarket equivalents from Blum and Grass fit the same cup bore and screw pattern, often at half the price, and function identically for most drawers and doors. For a visible door face on a finished addition, we lean OEM. For hidden interior hardware, aftermarket is honest value. For countertops and vanities in the same addition, we also service Cambria, Silestone and Kohler, so you’re not chasing three suppliers.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Home Additions & ADU Is Failing

The part usually tells you before it fails. Watch for these:

  • A soft-close drawer that slams shut. The damping mechanism inside the glide has worn or cracked. In Los Angeles humidity swings, cheap glides fail in three to five years; quality undermount glides last longer.
  • A cabinet door that won’t stay closed, or swings past 90 degrees. The hinge spring has gone slack. This is a hinge replacement, not a door replacement, and a genuine KraftMaid hinge swap takes one visit.
  • Cabinet boxes pulling away from the wall. The mounting screws or the wall backing have loosened, often because the stud layout wasn’t mapped before install. This one is structural and needs attention.
  • Drawer glides that feel gritty or grab. Dirt and cabinet dust have worked into the glide track. In a dry Los Angeles summer, the plastic rollers can also crack from UV and heat exposure on cabinets near windows.
  • Doors that no longer line up at the cabinet face. The hinges are out of adjustment or the cabinet box is out of square. Hinges can be re-set; a racked box means a reinstall.

Replacement Cost & What’s Included

Hardware-and-finish work inside a Los Angeles addition, including hinge and glide swaps, cabinet re-hangs and finish component replacement, typically runs $53,100 – $153,400 for the work we scope as a full addition or ADU build. Cabinet installation in Los Angeles runs $4,720 – $15,340. A cabinet re-hang or a hardware swap alone is smaller and quoted separately. What drives the number: door style and finish availability, whether the cabinetry is faced with real wood or thermofoil, how many units need work, and whether the box has to come off the wall to level and re-block. We price parts and labor as separate line items so you can see exactly what the hardware costs and what the install costs. Our upfront pricing means the number you see is the number you pay, and any replacement work carries the same 730-Day Done Right Promise as a full build.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself: open doors and look for cracks in the hinge cups, wiggle each hinge to feel for play, run every drawer and listen for the soft-close catch, and confirm the cabinet is attached to a stud by pressing on the box. Write down the door style name and hinge brand. Where DIY goes wrong: replacing a hinge or glide with a part that doesn’t match the screw pattern means new holes in your cabinet, and pulling a drawer glide out of a heavy box without support can drop the unit. If a cabinet box is separated from the wall, stop and get someone out – a falling upper cabinet is a real hazard. If the box is sound and you just need hardware matched, call (888) 427-1733 for a free estimate; our technicians have up to 12 years of experience and arrive background-checked, in uniform.

FAQs

How long do KraftMaid cabinet hinges and glides last? Quality hinges and glides typically last 10 to 15 years with normal use. In Los Angeles, where interior humidity swings and sun exposure near windows can run higher, plan on checking hardware annually and budgeting a swap somewhere in the middle of that range. If a hinge or glide has gone slack before year five, it’s usually a low-grade part, not normal wear.

Can a failed hinge or glide be repaired instead of replaced? Sometimes yes – a hinge out of adjustment can often be re-set without new parts, and a drawer glide can be cleaned and re-lubed. If the damping mechanism is cracked or the spring has failed, replacement is the fix. Call (888) 427-1733 for an exact quote – estimates are free.

How long does a KraftMaid hardware swap take? A single door hinge swap takes minutes; a full kitchen’s worth of hinges and glides is usually one visit. If a cabinet box has to come off the wall to re-block and level, plan a longer visit. We’ll give you the timeline in the estimate before we schedule.

How do you source the right KraftMaid part? We match on door style name, hinge brand, cup bore and screw hole centers – the panel sticker and a measurement, not the name alone. We source from KraftMaid directly and from quality Blum and Grass equivalents when the pattern matches and the hidden faces don’t matter. We don’t stock parts and don’t carry them on a truck; we order to your cabinet.

Let’s Get Your Numbers Straight

If you’ve got a KraftMaid addition or ADU with hardware that’s failing, or you’re planning the build, call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate. Calls are answered by a live person 24/7. We’ll walk the cabinets, tell you what’s actually wearable and what needs replacing, put it in a written line-item estimate, and stand behind it. Finishing with KraftMaid also means you can pair the same addition with Cambria, Silestone and Kohler surface and fixture work handled by the same crew.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch