A Groundwork company - serving Los Angeles, CA

Cambria Home Additions & ADU in Los Angeles, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU: The Los Angeles Owner’s Guide

We build Cambria-surface home additions and ADUs in Los Angeles, with permitted project costs running $53,100 – $153,400 for a full addition and $106,200 – $259,600 for a standalone ADU, and stand-alone garage conversions at $35,400 – $94,400. Los Angeles owners usually discover a surfacing problem the hard way: a discolored ring bleeding through a wet bar slab in the new ADU kitchenette, a hairline crack wandering out from the corner of a peninsula, or an edge that’s started to chip where the family room addition meets the patio door. By the time it shows, the slab is already set, the cabinets are already hung, and the fix has to be planned around finished work.

Call (888) 427-1733

Which Cambria Models This Applies To

Cambria is a quartz surface, so “model” here means the specific design line, not a mechanical part number. Every Cambria slab is engineered quartz, but the design families fall into different visual and physical camps: the white and marble-look designs (Brittanicca, Ella, Annaleigh), the warm veined and gold designs (Hawthorne, Roxwell, Ironsbridge), and the darker, more uniform designs (Blackpool, Carrick). That matters because the failure pattern differs. Light marble-look slabs hide scratches and show stains; dark slabs hide stains and show every edge chip. When we spec a wet bar, a kitchenette, or a bathroom vanity in a Los Angeles addition, we match the design to where it will actually sit in the room, not just to the sample the owner liked.

Identifying what you have is the first step. Check the underside of the slab or the fabricator’s sticker on the cabinet rail; Cambria slabs carry the design name on the label. If the label is gone, measure the thickness (2 cm and 3 cm are the two common builds) and note the edge profile. On the OEM-versus-aftermarket question, Cambria doesn’t sell “OEM replacement parts” the way a garage door brand does, so the real decision is slab-and-fabricator versus slab-and-fabricator. We source verified Cambria slabs and match the design line to your existing surface, so a repaired bar top with a KraftMaid or Silestone-adjacent cabinet run doesn’t read as a patch job. Once the right design is confirmed, the work is ordinary fabrication: template, cut, edge, install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Home Additions & ADU Is Failing

Quartz is dense and non-porous, so failure usually traces back to how it was installed or what it’s sitting next to, not to the material itself. Here’s what Los Angeles owners actually report.

  • Cracks radiating from a corner or a sink cutout. These come from a cabinet run that flexed, or from a cutout made too close to the edge. Quartz is rigid and won’t absorb movement, so a slab with an unsupported overhang cracks at the weakest point.
  • A ring or dark bloom under a wet bar or kitchenette. That’s a seam or edge that lost its seal and let moisture sit against the substrate. In an ADU kitchenette the slab is smaller and the seams are tighter, so a poor seam shows up fast.
  • Chips along the edge or at the dishwasher opening. Edge chips are usually impact, not wear. A 2 cm slab chips more readily than 3 cm, and it’s the one reality that pushes most Los Angeles owners to replace the whole top rather than patch it.
  • Visible seams that have gone gray or gritty. Adhesive that wasn’t color-matched to the design line, or that has aged and pulled. On a marble-look design like Brittanicca, a bad seam is more obvious than on a uniform dark slab.
  • A slab that rocks or sounds hollow at the touch. The substrate under it has shifted, or the cabinet run settled. That’s a support problem, and resurfacing over it just moves the failure a year down the road.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Cambria surface in a Los Angeles addition or ADU, the honest installed range depends on square footage and edge detail, and the line-item pricing we publish for related work looks like this:

Scope Installed Range (Los Angeles)
Countertop installation $2,360 – $7,670
Kitchen island installation $3,540 – $11,800
Backsplash installation $945 – $2,950
Bathroom vanity installation $945 – $3,540
Full home addition $53,100 – $153,400
ADU construction $106,200 – $259,600
Garage conversion $35,400 – $94,400

What drives the range: square footage, slab thickness (2 cm versus 3 cm), edge profile, number of cutouts, and whether the substrate needs rebuilding first. We quote parts and labor as separate line items so you can see exactly what the Cambria slab costs versus the fabrication and install. Upfront pricing, no surprises – the number you see is the number you pay. Every install is covered by our 730-Day Done Right Promise, which means if the seam fails or the edge chips under normal use, we come back and make it right.

DIY or Call Us?

What you can safely do yourself: photograph the failed area, check the underside label for the design name, measure the slab thickness, and note whether the slab rocks or sounds hollow. That’s information we use to quote accurately. What you shouldn’t do yourself is the fabrication and install. Cutting engineered quartz requires a wet saw and dust control (silica dust is a real hazard, and Los Angeles air-quality rules apply), and setting a 3 cm slab onto a cabinet run without a proper substrate and support is how a $600 slab turns into a cracked one before the adhesive sets. Edge profiling and seam matching are where a bad DIY job shows up within weeks. If your Cambria surface has failed in an addition or ADU, call (888) 427-1733 for a free estimate. We’ll tell you straight whether it’s a repair or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch