Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling: The Los Angeles Owner’s Guide
Silestone kitchen remodeling in Los Angeles runs $16,520 to $53,100 installed, depending on whether you’re resetting a countertop and backsplash or rebuilding the room down to the cabinets. We handle the full scope, including tearing out failing Silestone surfaces and matching new slabs to your existing layout. Most projects are planned and scheduled rather than rushed, because a quartz kitchen has to be templated and dried in before it’s touched.
Los Angeles owners usually don’t wake up shopping for a remodel. They notice something first. A hairline crack that runs out from the sink cutout after a hot pan lands too close. A seam that’s begun to show a dark line along the island. A dishwasher leak that stained the slab and swelled the cabinet boxes underneath. Or the honest one: a 1990s Silestone colorway that no longer fits the kitchen it’s sitting in, and a backsplash that’s dated the whole room. That’s the moment the search starts, and it’s usually the moment a real countertop conversation should start too.
Key takeaways
- Silestone is engineered quartz, not natural stone. It resists stains well but it is not heat-proof, and the number one failure we see in Los Angeles kitchens is thermal shock around cooktops and sink cutouts.
- Cracks in quartz usually mean a seam, a cutout, or a cabinet that moved. Replacing the slab without fixing the cabinet underneath is how the same failure comes back.
- Countertop-only work and full kitchen remodels are different jobs. Pricing below reflects the full kitchen remodel range; we’ll tell you plainly which you actually need.
- All work is backed by our 730-Day Done Right Promise, and estimates are free.
Which Silestone Models This Applies To
Silestone has cycled through dozens of color families and two major slab thicknesses over the years, and compatibility matters at the edges. The current lineup is mostly sold in 2cm and 3cm thickness, and the thickness drives everything downstream: edge profile depth, undermount sink reveal, and whether your existing cabinet rail heights will take the new slab without modification. If your kitchen was done in a 2cm slab set over a plywood build-up, dropping in a 3cm slab changes the countertop height and can push your dishwasher out of its opening. We measure for that before the quote, not after.
Identifying what’s actually in your kitchen starts with the fabricator sticker. Most Silestone installs have one applied under the overhang or on the underside of the island, and it usually carries the color name and the fabricator. If the sticker’s gone, the color family can still be narrowed by eye: the classic speckled whites and warm beiges are the ones we still template against most often. Bring a drawer or a photo, and we can usually match the family without guessing.
The OEM versus aftermarket decision is different for Silestone than it is for a part on a machine. There is no “aftermarket Silestone slab” in any meaningful sense; the material is proprietary and the color lots vary by production run. So the real call is whether to source the closest current color from the same family or to use the failure as a reason to reset the whole room. In Los Angeles, a lot of owners land on the second one, because a partial match on a 15-year-old slab reads as a patch, not a repair. We’re an independent service provider and not affiliated with Silestone, so we’ll show you both paths with real numbers.
If you’re already planning cabinet work alongside the counter, this is the moment to align it with a cabinet line you trust. We work with KraftMaid for cabinetry, Cambria and Silestone for quartz surfaces, and Kohler for sinks and faucets, so the counter, the boxes, and the plumbing are specified to fit each other from day one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Kitchen Remodeling Is Failing
- A crack leading out from a sink or cooktop cutout. Quartz is strong in the field but the cutout corners are the weak point. A hot pan set on the edge of the cutout, or a cabinet that settles under the sink, concentrates stress there and the crack starts.
- A dark or visible line along a seam. Seams in Silestone are mechanically bonded and the joint can open as the cabinet box under it shifts. A seam that’s showing means the substrate is moving, not just that the glue failed.
- Staining or a dull patch that won’t clean out. Silestone resists stains from most foods and oils, but it is not invincible. Dark liquids left on a chip or a worn spot, or etching near the cooktop from a hot pan, will dull the surface and only a refinish or replacement fixes it.
- Lifting, rocking, or a hollow sound underfoot at the counter edge. That’s a cabinet or substrate problem showing through the counter. If the cabinet is failing, the slab above it is being asked to carry load it wasn’t designed to carry.
- A dishwasher or cabinet face that suddenly rubs the counter. On a 2cm slab that’s often a sign the cabinets have settled, or that a previous remodel put in a slab thickness that didn’t match the cabinet rail. Either way, it’s a cabinet and counter conversation, not a countertop-only one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For the full kitchen remodel scope in Los Angeles, expect $16,520 to $53,100 installed. A Silestone-specific project in that band usually lands on the lower half when the cabinets stay and only the surface and backsplash change, and the upper half when cabinets, plumbing, and electrical move with it. Here’s how the line items break out:
| Scope | Los Angeles range |
|---|---|
| Full kitchen remodel (Silestone counter within scope) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| New cabinets (installed) | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: slab choice and color family, slab thickness (2cm vs 3cm), number of seams and whether an island is templated separately, cabinet condition underneath, and whether plumbing or electrical has to move. We price with upfront pricing, no surprises: a written line-item quote before anything is torn out, and the number you see is the number you pay. Every job is backed by the 730-Day Done Right Promise, and if it’s not done right, we make it right. Ask about our standing promotions while you’re pricing: $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult.
DIY or Call Us?
Here’s the honest split. You can safely inspect your own counter: check the fabricator sticker, photograph any crack or seam, measure the slab thickness at a drawer opening, and note whether a cabinet rocks or a face rubs the counter. That’s diagnostic and useful, and we’ll ask for it.
Where Silestone work goes wrong is at the install and the teardown. A quartz slab in the 2cm and 3cm range is heavy, brittle at the cutouts, and doesn’t flex. Cut wrong, it cracks. Set on a cabinet that’s out of level, it cracks later, and the crack finds the seam. Removing a slab without releasing the adhesive properly can take the cabinet box with it, and the plumbing under a sink is right there through the whole job. That’s not a job to learn on. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform; calls are answered by a live person, 24/7. If you’re not sure whether it’s a patch or a remodel, call us at (888) 427-1733 for a free estimate and we’ll tell you straight.
FAQs
Twenty years or more is realistic for a Silestone surface that was installed over sound cabinets and kept away from direct heat, though Los Angeles homes see more thermal failures than most because of the weather swing between summer and the marine layer and the way a kitchen heats and cools through the day. The slab itself is durable; the failure points are the cutouts, the seams, and the cabinet underneath.
A short crack near a cutout can sometimes be bonded and polished, and a dulled area can sometimes be refinished, but a crack that runs to the cabinet or a seam that’s opening has a substrate problem behind it, and repairing only the surface means it comes back. We’ll check the cabinet and substrate before quoting either way. Call (888) 427-1733 for a free estimate and an honest answer on which applies to your counter.
A countertop-only swap runs a few days once the slab is templated and on site, and a full kitchen remodel runs weeks on a schedule you see before the first day of work. The plan is written up front, and the counter doesn’t get torn out until the new slab, the cabinets underneath, and the sink and faucet are all confirmed. For a real timeline on your kitchen, call (888) 427-1733.
We template on site, then match the color family and slab thickness to your existing layout, checking the fabricator sticker and the cabinet rail heights before we commit to a thickness. We specify sinks and faucets with Kohler and cabinetry with KraftMaid so the counter, boxes, and plumbing are built to fit each other. We’re an independent service provider, not affiliated with Silestone, and estimates are free; call (888) 427-1733 to get started.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.