A Groundwork company - serving Los Angeles, CA

Caesarstone Kitchen Remodeling in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Caesarstone Kitchen Remodeling: The Los Angeles Owner’s Guide

We install and repair Caesarstone kitchen surfaces and the cabinetry and support systems around them, and a full kitchen remodel in Los Angeles typically runs $16,520 – $53,100 depending on cabinet scope, island work, and backsplash detail. A countertop-only Caesarstone replacement usually lands in the $2,360 – $7,670 band when the existing cabinet boxes are sound and only the surface and edge profile change. Most owners don’t notice the failure until it announces itself: a faint hairline at a seam that catches a fingernail, a dull thud instead of a ring when you tap a field of stone, or a 1/16-inch gap between the slab edge and the cabinet rail that wasn’t there last year.

Call (888) 427-1733

We’re an independent service provider and not affiliated with Caesarstone. That matters here because it shapes how we source: we’re not locked into one SKU or one dealer program, so we can match your slab series, edge profile, and the cabinet and support conditions under it honestly.

Key Takeaways

  • Los Angeles kitchen remodels with Caesarstone surfaces run $16,520 – $53,100 installed.
  • Countertop-only replacement: $2,360 – $7,670. Backsplash: $945 – $2,950.
  • Call (888) 427-1733 for a free estimate. Live person, 24/7.
  • Every job is backed by our 730-Day Done Right Promise.

Which Caesarstone Models This Applies To

Caesarstone ships in consistent slab thicknesses (commonly 20mm and 30mm) and standard jumbo and regular formats, but the series matters because surface finish and edge profile options differ between collections. The Classics line (the quartz-heavy whites, creams, and greys) takes a standard eased or bevel edge cleanly; the Supernatural and newer premium collections run surfaces and veining that reward a mitered or waterfall edge, which changes fabrication time and cost. The identification gotcha: the model name lives on a label on the underside of the slab or the fabricator’s job tag, not on the visible face. If the label is gone, we identify by measuring slab thickness, checking the edge profile, and cross-referencing a physical sample against the field. We never claim to stock Caesarstone or carry slabs on a truck. We source through the dealer network and match your series, which is why we ask for the label and the thickness before quoting.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Caesarstone Kitchen Remodeling Is Failing

Quartz is dense and non-porous, so failures almost always trace back to what’s underneath or how a seam was set, not to the stone itself. Here’s what we see in Los Angeles kitchens.

  • Hairline cracks at seams. Usually a sign the two panels were bonded on an uneven cabinet rail or the substrate flexed; quarterly quartz expands and contracts with kitchen heat, and an unsupported seam is where it shows. A fingernail that catches is the tell.
  • Dull thud when you tap. A hollow sound over a section of countertop means the slab isn’t in full contact with the substrate, often a high spot on the cabinet box or missing shims. Solid contact rings; a void thuds.
  • Gap between slab and cabinet rail. Settling cabinet boxes, a warped rail, or a water-swollen particle-board substrate under a sink pull the stone off level. Los Angeles interior heat near a range speeds this up.
  • Edge chip or separation at the profile. A bevel or mitered edge that lifts or chips at the joint points to an adhesive or fabrication issue, common where a thin edge was bonded to a thicker slab without proper support.
  • Staining near a seam or cutout. Quartz resists stains, so discoloration at a seam or sink cutout usually means the seam sealant failed and moisture is wicking into the substrate below.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Los Angeles, with parts, fabrication, and labor in one number:

  • Countertop installation (Caesarstone replacement): $2,360 – $7,670
  • Backsplash installation: $945 – $2,950
  • Kitchen island installation: $3,540 – $11,800
  • Cabinet installation: $4,720 – $15,340
  • Full kitchen remodel: $16,520 – $53,100
  • Small kitchen remodel: $10,620 – $23,600

What drives the range: linear footage, number of cutouts (sink, cooktop), edge profile complexity (eased is at the low end, mitered and waterfall at the high end), and whether the substrate or cabinets need repair before new stone goes down. Our pricing is upfront and the number you see is the number you pay. The work carries our 730-Day Done Right Promise. We also source through KraftMaid for cabinetry and handle Cambria and Silestone when a different quartz or surface family fits the job better.

DIY or Call Us?

You can safely check a few things yourself: confirm the model label on the underside, measure slab thickness, and note exactly where the crack or gap is with a photo. What you can’t safely do is lift or reset a quartz slab. Caesarstone panels run heavy (a 30mm jumbo slab is well over 300 pounds), and an unsupported slab under stress can crack or fail the moment it’s unshimmed, which turns a repair into a full replacement. Setting a seam correctly also requires a level substrate and the right adhesive, not a tube of caulk. That’s the part where DIY goes wrong. For anything involving lifting, resetting, or re-seaming, call us at (888) 427-1733. Estimates are free, and a live person answers 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch