A Groundwork company - serving Los Angeles, CA

Moen Bathroom Remodeling in Los Angeles, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Bathroom Remodeling: The Los Angeles Owner’s Guide

Bathroom remodeling with Moen fixtures in Los Angeles typically runs $10,620 to $33,040 installed, depending on whether you’re replacing a worn-out valve and trim or rebuilding the whole room. The part that most often brings owners to this page is the Moen cartridge or valve inside the shower or tub diverter. You usually find out it failed the same way everyone does: a drip that won’t stop, water that won’t get hot, or a handle that spins loose in your hand. For an older walk-in shower in a 1920s bungalow off Vermont Avenue or a 1960s tract bath in the Valley, that cartridge is often 15 to 25 years old and long past its service life.

Call (888) 427-1733

Which Moen Models This Applies To

Moen sells a handful of cartridge families, and the one in your wall decides what part you need. The 1222 and 1225 cartridges are the most common single-handle parts in Los Angeles homes. The Posi-Temp 1222 is pressure-balancing and the standard for tub and shower valves since the 1990s. The 1200 and 1200B fit older and some two-handle setups. The 1255 is a different animal, used in a number of Moentrol valves. Getting the wrong one is the compatibility gotcha: a 1222 will not fit a valve cut for a 1225, and trim kits are matched to specific valve bodies.

To identify yours, take the handle and escutcheon off and read the stamped plate on the valve body, or the part number on the old cartridge if it comes out cleanly. Don’t guess by handle shape; two different cartridges can wear identical trim. As an independent service provider, we’re not affiliated with Moen, so we source exact OEM replacements rather than refacing a worn valve. On the OEM-versus-aftermarket call, we recommend OEM for cartridges and valve bodies. A third-party cartridge can save a few dollars and cost you the same leak again in two years.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Bathroom Remodeling Is Failing

  • A constant drip from the spout. The cartridge O-rings or the ceramic disc has worn, letting water past the seal. In Los Angeles’s hard water, mineral scale accelerates that wear.
  • The handle turns with almost no resistance, or seizes up. The cartridge’s internal mechanism has stripped or calcified. A loose handle usually means the cartridge is spent, not the trim.
  • Water temperature swings or runs cold. The pressure-balancing spool inside a Posi-Temp cartridge has failed, or the hot-side stop is clogged with scale.
  • Water leaking behind the wall or onto the floor. The valve body seal or the cartridge housing is failing. This is the one to treat urgently, because water behind the wall rots studs and tile backer fast.
  • Rust streaks or a loose escutcheon plate. A slow leak has been running down the valve for months. Caught early, it’s a cartridge and trim swap; caught late, it’s a remodel.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Full bathroom remodeling in Los Angeles runs $10,620 to $33,040 installed. A tighter project, like a small bathroom, lands at $5,900 to $14,160. If you’re only changing out the shower side, a walk-in shower installation is $5,310 to $14,160 and a tub-to-shower conversion is $4,130 to $11,800. A shower replacement alone is $3,540 to $10,030, and a bathroom vanity installation is $945 to $3,540.

What drives the range: whether the valve body has to come out of the wall (tile and backer usually do too), the finish and trim tier, and how much of the room you’re touching. Our upfront pricing means the number you see is the number you pay, with no surprise line items once tile comes off. Parts sit on the quote as a line item, separate from labor, and the whole job is covered by our 730-Day Done Right Promise. From foundation to finish line, one contractor handles it.

DIY or Call Us?

You can safely check the obvious things: read the valve model plate, test whether the drip stops when you shut the supply stops, and look for moisture or staining around the escutcheon. What you should not do yourself is open the wall to swap a valve body or cut into a live water line under pressure. On a full bathroom remodel, the wall is coming open anyway, which is when a failing cartridge should be replaced rather than nursed. In this climate, a slow valve leak behind a wall in a Los Angeles bathroom is a mold and framing problem waiting to happen. Background-checked, uniformed technicians handle the supply shutoff, the cartridge swap, and pressure testing before anyone closes the wall. Call (888) 427-1733 and a live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch