Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Los Angeles Owner’s Guide
Quick answer: Kitchen remodeling built around Blanco sinks and faucets in Los Angeles typically runs $16,520 – $53,100 installed, depending on whether you’re resetting a sink into existing quartz or rebuilding the entire cabinet run around it. We’re an independent service provider, not affiliated with Blanco, and we source OE and OEM-equivalent components to match your exact model. Most owners in Los Angeles discover a failing Blanco part the same way: the undermount sink starts pulling away from the countertop, the faucet pull-down wand loses pressure, or a slow drip keeps coming back no matter what they tighten.
The most common Blanco failures we see in Los Angeles homes aren’t dramatic. A Silgranit sink chips at the drain edge. A pull-down sprayer leaks at the quick-connect. An undermount clip rusts through and the sink drops a millimeter a year. None of that means you need a whole new kitchen. It means you need the right part matched to the right model, installed by someone who’s done it before.
Key Takeaways
- Blanco parts are model-specific. A Silgranit drain assembly for a DIAMOND 1.75 bowl won’t fit a PRECIS single bowl.
- Most repair and replacement work in Los Angeles is finished in a single visit when parts are matched correctly.
- Undermount sink pulling away from stone is the #1 Blanco-related call we get in older Los Angeles homes.
- Upfront pricing, no surprises. The number you see is the number you pay.
Which Blanco Models This Applies To
Blanco’s kitchen lineup splits into two families: Silgranit granite-composite sinks and stainless steel. Within Silgranit, the names you’ll see on the box or stamped under the rim are DIAMOND, PRECIS, LUMINOS, VINTERA, IKON, and RONDA. Faucets run under series names like ARTIC, EMPRESSA, LATO, and SONUS. Each sink and faucet family has its own mounting geometry, drain size, and sprayer connection. That’s the compatibility gotcha most owners miss: a replacement part that says “fits Blanco” almost never fits all of them.
To identify your exact model, look for the sticker on the underside of the sink or the tag on the faucet shank before you order anything. Snap a photo; the SKU is usually printed in small grey type. If the label is gone, measure the bowl depth, the drain opening (Blanco Silgranit uses a 3.5-inch standard drain, but the collar and strainer basket differ by model), and the number of mounting clips.
The OEM-versus-aftermarket decision for Blanco is real. Factory Blanco parts cost more but fit exactly and match finish color on visible components. Quality aftermarket equivalents (Stainless steel basket strainers, pull-down sprayer heads, undermount clip kits) work fine for hidden parts and are what we install most often. For anything visible – a soap dispenser, a decorative drain cover – we steer owners to OEM so the finish matches the rest of the sink for the long haul. We mention KraftMaid, Cambria, and Silestone only as reminders of the surrounding kitchen surfaces your Blanco has to fit into; the Blanco work itself is our focus here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Kitchen Remodeling Is Failing
- Sink pulling away from the countertop. You run a fingernail along the stone edge and it catches on a gap. That’s a failed undermount clip or a compromised epoxy bond. In Los Angeles homes built in the 1980s and 1990s, the original clips are often steel and have rusted through from decades of moisture behind the counter.
- Persistent drip from the faucet base or sprayer. A slow weep that never fully stops means a worn cartridge or a cracked pull-down sprayer connection. Our technicians see this most on EMPRESSA and SONUS pull-downs after years of hot-water cycling.
- Water pooling around the drain or a crack radiating from it. Silgranit composite can chip at the drain if the strainer was overtightened or the wrong drain assembly was jammed in. Once the composite is cracked, a sealant patch won’t hold – the drain collar needs to be replaced and re-seated.
- Faucet handle feels loose or spins without resistance. The cartridge is worn or the handle stem has stripped. A rebuild or full cartridge replacement restores function; replacing only the handle won’t fix it.
- Dishwasher or disposal backing up into the sink. Often the drain flange gasket has degraded or the disposal mount has worked loose. Not a Blanco-specific failure per se, but it’s the most common secondary complaint we hear when a Blanco sink install is 10+ years old.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what we actually charge for Blanco-related kitchen work in Los Angeles, calibrated to real jobs:
| Service | Installed price range |
|---|---|
| Full kitchen remodel (Blanco-centered) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: whether the countertop has to come up to reset an undermount sink, the faucet finish and model, and whether plumbing has to be reworked behind the wall. A straight sink and faucet swap with the counter intact sits at the low end. A full rebuild around a new Blanco sits at the high end. Every job gets a written line-item quote so you see parts and labor separately before we touch a screwdriver. The 730-Day Done Right Promise covers workmanship; if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: snap a photo of the model sticker under the sink, measure the drain opening and bowl depth, look for moisture behind the cabinet wall after a long run of the faucet, and confirm the exact SKU on the faucet tag. That information saves time on the call and helps us bring the right part the first time.
What we don’t recommend is pulling a Silgranit sink off a stone counter and re-bonding it yourself. Cutting the old adhesive, scraping silicone without chipping the quartz edge, and re-aligning a heavy composite bowl on undermount clips takes a steady hand and the right tools. A misaligned reset means a leak that shows up weeks later and, in Los Angeles homes with wood subfloors and older cabinetry, hidden water damage is far more expensive than the original repair. A cross-threaded faucet cartridge or a stripped sprayer quick-connect is another place owners get stuck; the plastic fittings Crack easily when over-tightened.
Call us at (888) 427-1733 and we’ll schedule a free estimate. We’re background-checked, arrive in uniform, and most jobs are completed in a single visit.
FAQs
Ten to fifteen years is the realistic working life of a Blanco faucet cartridge and about fifteen to twenty years for a Silgranit sink body, with the caveat that Los Angeles water – hard in many parts of the San Fernando Valley and the Westside – shortens cartridge life to seven to ten years on average. Call (888) 427-1733 for an exact quote; estimates are free.
Sometimes. A worn faucet cartridge, a leaking sprayer quick-connect, and a failed drain gasket can all be repaired with the right part and no sink removal. A cracked Silgranit bowl or a sink that’s separated from its countertop needs replacement or reset. We’ll tell you honestly which is which during the estimate. Call (888) 427-1733.
A faucet cartridge or sprayer replacement runs about an hour. A full sink-and-faucet swap with countertop intact runs three to four hours. Resetting an undermount sink into stone with a fresh bond typically runs four to six hours and most of that is adhesive cure time. Most Los Angeles jobs are wrapped in a single visit. Call (888) 427-1733 for a scheduled window.
We match from the model sticker or, if it’s gone, from measured bowl depth, drain opening, and clip count, then order the correct OEM or OEM-equivalent part for your specific model. We don’t guess from photos. Call (888) 427-1733 and we’ll walk through the ID process with you during the free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.