Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Los Angeles Owner’s Guide
We build and coordinate Blanco-compatible home additions and ADU work in Los Angeles, and the installed range for a home addition runs $53,100 – $153,400, while a full ADU lands between $106,200 – $259,600 depending on size, site, and finish level. If you’re landing on this page because a Blanco-related component failed, you’re probably not dealing with a small fix. Owners usually discover the problem the same way: a crack that keeps reappearing in the same drywall seam, a door on the addition that suddenly won’t latch square, a slow drip at a junction that only shows up after winter rain, or a soft spot in the floor near an exterior wall. None of those are cosmetic. Each one points to a specific part of the build that’s failing, and we’ll walk you through what to check and what it costs to make right.
Which Blanco Models This Applies To
Blanco is a name most Los Angeles homeowners associate with sinks and faucets, and that’s worth being straight about: when someone tells us they have “a Blanco problem” in an addition or ADU, nine times out of ten it traces back to a Blanco fixture or hardware assembly installed during the build, not to Blanco-branded structural components. Blanco’s kitchen and bath lines appear in a huge share of ADU kitchens and addition bathrooms across the city, and those installed fixtures are often the first things to fail. So step one is identifying what you actually have. Look for the label or etch on the fixture itself (Blanco stamps its model number on the underside of sinks and on the faucet body, usually near the supply connection), then match it to the spec sheet before you order anything. For faucets, measure the spread and spout reach; for sinks, verify the cutout dimensions, not just the nominal size. The OEM-versus-aftermarket call matters here: Blanco replacement parts are specified to their own tolerances, and an aftermarket cartridge or drain assembly that “fits” can still sit a millimeter off and leak within a season. Where a genuine Blanco part is available, we specify it. Where the lead time is long and a compatible quality equivalent exists, we’ll tell you the tradeoff in writing. Call (888) 427-1733 if you’re not sure which you’ve got.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
These are the symptoms we actually get called about in Los Angeles additions and ADUs. Each one has a cause, and knowing the cause is what keeps you from paying twice.
- A recurring crack in the same drywall seam. That’s movement, not settling. It usually means a framing connection or a header wasn’t sized for the span, and the wall is flexing every time the addition heats and cools.
- Water staining at the base of an exterior wall after rain. On Los Angeles additions, this almost always traces to flashing at the wall-to-roof junction or a missing kick-out. Our wet winters expose it fast, and a dry summer can hide it for months.
- A door or window in the addition that won’t latch square. The opening has racked. Could be a hinge problem, could be a header problem, and the difference is $200 versus $8,000.
- A soft spot or bounce in the floor. Subfloor moisture, a compromised joist, or an improperly blocked seam. Bounce you can feel is a structural note, not a cosmetic one.
- Blanco fixture hardware that drips or won’t hold temperature. Cartridge or valve wear, and it’s the most common parts call we get on ADU kitchens. The fixture is fine; the internal part is spent.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for Blanco-compatible additions and ADU work in Los Angeles, with the part of the build that drives the number attached to each.
| Scope | Installed Range (Los Angeles) | What Drives the Range |
|---|---|---|
| Home Addition | $53,100 – $153,400 | Square footage, foundation type, whether you’re tying into existing framing or building freestanding |
| ADU Construction | $106,200 – $259,600 | Detached vs. attached, utility runs, kitchen and bath fixture package |
| Garage Conversion | $35,400 – $94,400 | Whether the slab and existing walls can stay, plus new mechanical and egress work |
Parts-plus-labor is quoted line by line. You’ll see the Blanco fixture allowance as its own line, separate from framing, drywall, and finish, so nothing gets buried. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Pricing is upfront, and the number you see is the number you pay. We pull the permits and pass the inspections.
DIY or Call Us?
Some checks are safe and worth doing yourself. You can confirm the Blanco model number on the fixture label, measure the cutout or faucet spread, and photograph the failing seam or stain so we can see it before we arrive. What you should not do is open a wall to chase a crack, reset a header, or re-flash a roof-to-wall junction on your own. Those are the exact points where an addition or ADU in Los Angeles fails, and getting them wrong once means paying for them twice. We’d rather you call. A licensed crew that has closed up a few hundred of these knows where to look in ten minutes. Call (888) 427-1733 for a free estimate and we’ll tell you honestly whether it’s a parts call or a structural one.
FAQs
Most Blanco sink and faucet assemblies in a properly built Los Angeles ADU hold up well for years, and the internal cartridges and drain assemblies are the parts that wear out first. In our experience the fixture body outlasts its moving parts by a wide margin, which is why we check the cartridge before we recommend replacing anything.
Often, yes. A drip or temperature issue at a Blanco faucet is usually a cartridge swap, not a whole-fixture replacement, and a hairline drywall crack can sometimes be a framing fix rather than a rebuild. We’ll tell you which one it is after we look, and we put the recommendation in writing.
A Blanco fixture part replacement is typically a short visit, often same day once the correct part is in hand. Structural work on an addition or ADU is a scheduled job, not a same-day call, and we’ll give you a real timeline with the estimate rather than a guess.
We match your exact model number against the manufacturer spec, then specify the genuine Blanco part where it’s available and a compatible quality equivalent only when we’ve confirmed the tolerance. We don’t guess at fit, and we don’t stock parts on a truck, so the part is ordered to your unit, not pulled off a shelf.
Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Blanco. We also work with KraftMaid, Cambria, and Silestone on the kitchen and bath side of additions and ADUs. Calls are answered by a live person, 24/7, and every project comes with upfront pricing and (888) 427-1733 is the fastest way to reach us for a free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.