A Groundwork company - serving Los Angeles, CA

Delta Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Driveway & Pavers: The Los Angeles Owner’s Guide

We install and service Delta driveway and paver systems across Los Angeles, and what we quote most often lands in the $8,260 – $21,240 range for a full paver driveway replacement, depending on square footage, base prep, and paver selection. For a hardscape repair or a single settled section, the number is far smaller. Owners usually find out something is wrong the same way: a Delta paver field that used to lock tight starts rocking underfoot, sand washes out of the joints after a rain, or a border course heaves and lets water run toward the garage slab. If any of that sounds familiar, you’re reading the right page. We’re an independent Los Angeles construction company, and we install and repair Delta hardscape products and compatible parts sourced to your specific system.

Call (888) 427-1733

Which Delta Models This Applies To

Delta’s hardscape line covers several distinct paver families, and the part you need depends entirely on which one sits in your driveway. The common installations we see in Los Angeles fall into two broad groups: concrete interlocking pavers (the standard 60mm, 70mm, and 80mm thickness tiers) and the permeable and border systems that use a different thickness and edge restraint. The first thing to check is the paver thickness at the edge of the driveway, not the top face, since the same surface texture can hide a 60mm paver behind an 80mm field. A driveway that carries a heavy vehicle load needs the 80mm spec; a 60mm paver set in a driveway is a compression failure waiting to happen, and no amount of joint sand will fix it.

For joints, edge restraints, base aggregate, and polymeric sand, the OEM versus aftermarket call is real. Delta-branded polymeric joint sand is formulated to a specific graded blend, and a generic bag with a different polymer ratio will fail faster in Southern California’s dry-then-sudden-wet cycle. For base and bedding, we use locally sourced aggregate that meets the spec, which is not necessarily Delta-branded but is matched correctly. On a Delta installation, the parts that matter for longevity are the edge restraint system and the joint sand, not the pavers themselves.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Driveway & Pavers Is Failing

Not every crack means a full replacement. Here’s what we check, and what each symptom usually points to:

  • Paver rocking underfoot. Base compaction failed or washing out beneath a single unit. The rock is a symptom; the base is the cause.
  • Joint sand eroding after rain. Wrong sand type or missing stabilizer, common in Los Angeles where the soil drains unevenly across clay-heavy pockets and sandy fill.
  • Border course heaving or separating. Edge restraint lost its bite, or the paver manufacturer’s restraint spec wasn’t followed. Water then runs toward your garage slab instead of away.
  • Efflorescence (white haze) that won’t wash off. Moisture trapped under the pavers, often from poor base drainage or a missing drainage plane.
  • Sinking or pooling at low spots. A deeper base failure. A settled section near a driveway apron or garage transition is the danger zone: a trip hazard and a water intrusion point.

Each of these has a different repair scope. The first four are often fixable in a single visit. The fifth is where you start talking about a section rebuild.

Replacement Cost & What’s Included

Here’s how the numbers break down in the Los Angeles market, priced as installed ranges – not a part on a shelf, but the full job with base prep, setting, edge restraint, and joint sand:

  • Paver driveway installation (full): $8,260 – $21,240
  • Concrete driveway installation: $5,310 – $14,160
  • Asphalt driveway paving: $4,130 – $10,620
  • Driveway replacement (remove and reinstall): $5,900 – $16,520
  • Driveway sealing: $295 – $825
  • Paver patio installation: $4,130 – $12,980

What moves you within the range: total square footage, base depth required by your soil (Los Angeles lots vary block to block), paver family and thickness, edge restraint complexity, and whether the old driveway must be hauled off. We price parts and labor as separate line items, so you see exactly what the Delta-spec restraint, joint sand, and base aggregate cost before labor. Every job comes with our 730-Day Done Right Promise and the $1,000 off projects over $10,000. We are not affiliated with Delta; we’re an independent Los Angeles contractor.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a real line here, and crossing it costs more than it saves. You can safely do the diagnosis: pull a little joint sand aside to check for voids, hose-test a low spot to see where water pools, and photograph the edge restraint to confirm the brand. What you shouldn’t DIY is base recompaction, edge restraint replacement, or anything under the driveway apron. That’s where a weekend project turns into a settled slab, a water problem at the garage transition, and a repair bill roughly three times the original. The compaction and the restraint are the whole ballgame on a Delta driveway, and they need real equipment and experience. Our technicians have up to 12 years of experience on Los Angeles hardscape, and they’ll give you upfront pricing before anyone touches a paver. Call (888) 427-1733 and we’ll get a free estimate on the calendar.

FAQs

How long should a Delta paver driveway last in Los Angeles? A properly installed Delta paver driveway typically lasts 25 to 30 years with correct base preparation and periodic joint sand maintenance. The failure point in Los Angeles is almost always the base and restraint, not the paver itself, which is why cutting corners on edge restraint shortens the lifespan to under 10 years. Call (888) 427-1733 for a free property assessment.

Can a failing Delta paver section be repaired, or does it need full replacement? Most settled or rocking sections can be repaired without replacing the entire driveway. A single failing panel is typically a base and re-restraint job, not a full tear-out. We’ll tell you honestly which category you’re in. Call (888) 427-1733 for an assessment and free estimate.

How long does the replacement take? A single Delta paver section repair is usually done in one visit. A full paver driveway replacement runs 3 to 5 working days for the tear-out, base prep, and reinstall, depending on square footage and access. Call (888) 427-1733 and we’ll give you a realistic timeline for your Los Angeles property.

How do you source Delta parts? We source Delta-compatible pavers, edge restraints, and joint materials matched to your specific system, identified by thickness, surface texture, and edge profile. We don’t carry parts on a truck or promise same-day availability, but we’ll confirm the correct match before we quote. Call (888) 427-1733 to schedule your free estimate.

Other Brands We Service

We also work with KraftMaid, Cambria, and Silestone for homeowners planning broader improvements alongside the driveway work.

For material brands across every trade – from KraftMaid and Cambria to GAF, Owens Corning, Andersen, and Marvin – we hold ourselves to the same standard. Background-checked, uniformed technicians on every job. Calls answered by a live person, 24/7. Upfront pricing, no surprises. From foundation to finish line, for a Los Angeles driveway that’s built to last and backed in writing.

Call (888) 427-1733 for a free estimate and design consult. If it’s not done right, we make it right within 730 days.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch