Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Los Angeles Owner’s Guide
Schluter bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 installed, depending on how much of the waterproofing assembly gets replaced. When the failure traces to a specific Schluter component, we can often identify the correct replacement and schedule the work within days, not weeks. Most Los Angeles owners find out something is wrong the same way: a soft spot underfoot at the shower curb, a grout line that keeps darkening no matter how often they clean it, or a musty smell in a bathroom that has no window and a hardworking exhaust fan.
Kerdi membrane that has separated from the substrate, a Kerdi-Board panel that took on water after a poorly sealed valve cut, a Kerdi-Fix bead that failed at an inside corner, a shower pan that was never sloped correctly from day one: these are the Schluter failures we see most across Los Angeles, and each one has a different fix and a different price tag.
Which Schluter Models This Applies To
Schluter’s bathroom system is really a family of components that have to work together, and identifying the right replacement starts with knowing which layer failed. Kerdi-Board comes in 1/2-inch and 3/8-inch thicknesses for walls and counters but in 1-inch, 1-1/2-inch, and 2-inch for shower benches and curbs, and a 3/8-inch panel is not a substitute for a 1/2-inch wall panel in a wet area, even if it fits the stud bay. Kerdi membrane is sold in 3′-3″ and 1-meter roll widths, and the overlap and thin-set method matters more than the roll size, so ordering the membrane without matching the thin-set Schluter specifies will not fix a leak.
Kerdi-Line and Kerdi-Drain floor drains use different bonding flange sizes, and the drain you choose depends on the tile size and the slope you can build on that floor. Kerdi-Fix sealant is the only joint sealant Schluter approves for its membrane, and you should not substitute a hardware-store silicone at the shower pan transition. The Kerdi-Shower pan itself comes in standard sizes and an off-center drain version, and putting a standard pan in a shower with an off-center drain will leave you with a slope that does not drain toward the weep holes.
On the OEM-versus-aftermarket question: Schluter publishes detailed installation handbooks and technical bulletins for every component, and matching the exact product number on the label (not just “Kerdi”) is how we confirm we’re buying the right part. A third-party uncoupling membrane that resembles Kerdi is not the same product, and a substituted drain assembly can void the Schluter warranty on the shower. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Schluter; we install Schluter systems because they perform in Los Angeles bathrooms, and we hold the same standard for the KraftMaid, Cambria, and Silestone products we install in the same homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Dark grout lines that return after cleaning. Water is getting past the tile and sitting against the Kerdi membrane, which is doing its job but has nowhere to drain. That pooling is the early warning, and it usually points to a missing or failed Kerdi-Fix at a change of plane.
- A soft or hollow-feeling shower floor. The Kerdi-Shower pan has lost bond to the substrate under it, often because the mortar bed under the pan was mixed too dry or set too thin for Los Angeles’s expansive clay soils to flex under without working the bond loose.
- Musty smell that survives a new fan. The membrane has been compromised at a penetration (valve, shower arm, or grab bar) and moisture is trapped in the wall cavity. Smell is the symptom; a missing Kerdi-Seal at the shower arm is the usual cause.
- Loose tile at the shower curb or bench. The Kerdi membrane was run over a curb but not lapped correctly around the outside corners, so moisture reaches the framing and the thin-set bond around the tile fails.
- Water staining on the ceiling below or on an adjacent wall. The Kerdi-Line drain’s bonding flange or weep holes are blocked or the pan was not sloped to the drain. This one is past inspection and needs a full rebuild of the shower pan, not a patch.
Los Angeles’s long dry stretches and hard water make some of these failures quieter than they would be in a wetter climate. Tile can look fine for months while the membrane behind it has already let go. That’s why we probe the shower floor and check membrane adhesion at every tear-out; we don’t price a Schluter repair off a phone photo.
Replacement Cost & What’s Included
Installed Schluter bathroom work in Los Angeles sits in these ranges:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Full bathroom remodel with Schluter waterproofing | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What moves the number: whether the pan comes out or just the membrane, whether the drain has to be rerouted for an off-center floor, whether the curb or bench gets rebuilt, and how much tile has to come off to reach the failed area. We price the parts and the labor separately so you can see what the Schluter component costs versus what installing it correctly costs. Every project carries the 730-Day Done Right Promise, a written line-item quote before a single tile is pulled, and 0% financing for 18 months with $1,000 off projects over $10,000. The number you see on the quote is the number you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: press a dry paper towel against the base of the shower wall and look for moisture wicking up, look at the drain cover for a clogged weep hole, and check the Schluter product label inside the valve wall or on the packaging if you saved it. What you cannot do safely is open a wall or pull up a shower floor to inspect the membrane; the Kerdi system is a waterproofing barrier, and cutting into it without rebuilding the whole assembly properly is how a small leak becomes a rotted stud next to a live shower valve. We’d rather you call before you cut. The same goes for a toilet or vanity move that lands near the membrane: if you’re not sure what’s behind the tile, stop.
Our technicians have up to 12 years of experience installing Schluter systems, and we’ll tell you plainly whether a repair or a full rebuild is the right spend. Call (888) 427-1733 and a live person picks up around the clock, so you get an answer tonight instead of Monday morning.
FAQs
How long does a Schluter waterproofing system last?
Schluter’s own materials are rated for the life of the tile assembly when installed over a proper substrate, and we regularly see 15- to 25-year-old Kerdi showers in Los Angeles that are still holding when the pan and slope were done right. The parts rarely fail on their own; installation failures shorten the life before the material does. Call (888) 427-1733 for an assessment of your specific shower.
Can a failed Schluter shower be repaired instead of replaced?
Often yes, if the failure is isolated to a valve seal, a corner Kerdi-Fix joint, or a single Kerdi membrane seam, and the pan is still sloped correctly. If the pan has lost bond or the drain flange is compromised, the fix is a new shower pan and membrane, because patching over a failed layer just traps moisture. We test for the difference before we quote. Call (888) 427-1733 to schedule that assessment.
How long does the swap take?
A single-component replacement like a Kerdi-Drain or a Kerdi-Line flange is usually a one-day job when the tile around it can be saved. A shower pan and membrane rebuild runs three to five days once the tile is off, and a full bathroom remodel in Los Angeles runs two to four weeks depending on permits and tile scope. We schedule the work around your household and give you a written timeline with the line-item quote.
How do you source the correct Schluter part?
We pull the exact product number from the label or the original installation spec, match it to Schluter’s current catalog for that component, and buy the submittal-matched part from a Schluter-authorized distributor, not a lookalike. That’s how we avoid the off-center versus standard pan mistake and the 3/8-inch versus 1/2-inch panel mix-up. Call (888) 427-1733 and we’ll confirm the part for your shower before you buy anything.
Talk to Groundwork Construction Co. of Los Angeles
Whether you’re facing a soft shower floor, a leak you can’t trace, or a bathroom remodel and want the Schluter system done right the first time, call (888) 427-1733. A live person answers day or night, the estimate is free, and the quote you get is written line by line with the parts and labor named. From foundation to finish line, we handle the whole Los Angeles project under one roof, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.