A Groundwork company - serving Los Angeles, CA

Schluter Roofing in Los Angeles, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Los Angeles Owner’s Guide

Schluter is a tile and stone setting brand, not a roof manufacturer, and the “Schluter roofing” most Los Angeles homeowners actually need is the waterproofing layer under clay, concrete, or slate tile: Schluter-DITRA-DRAIN, KERDI-BOARD, and the KERDI-LINE drain family that sit beneath the tile field. Installed repair and re-detail work on those systems in Los Angeles runs roughly $470 to $2,125 for a targeted fix and climbs toward the low end of the $9,440 to $23,600 roof replacement band when the deck or underlayment has already failed across a larger area. You’ll usually find out something’s wrong the same way everyone does: a stain spreading across a ceiling below a valley, a tile lifting after a Santa Ana wind event, or water pooling at a flat roof-to-wall transition where the membrane was never properly tied in. That’s when the phone calls start.

Call (888) 427-1733

Groundwork Construction Co. of Los Angeles is an independent service provider. We’re not affiliated with Schluter, and we don’t sell their parts – we install and repair tile roofing systems that use them.

Which Schluter Models This Applies To

Schluter’s roofing-relevant line is narrower than their bathroom line, and that trips people up. The products you’ll actually find under a Los Angeles tile roof are DITRA-DRAIN (an uncoupling and drainage mat), KERDI-BOARD (a waterproof building panel used on flat and low-slope sections), KERDI-LINE (linear drains for roof terraces and balconies), and the KERDI-BAND and KERDI-FIX sealing accessories that tie them together. If you’re staring at a label on a roll or panel, look for the Schluter part number printed on the edge banding – it’ll read something like DITRA-DRAIN 8 or KERDI-BOARD with a metric thickness in millimeters (typically 5, 10, 20, or 38 mm). Measure the thickness of what’s there; ordering the wrong panel thickness changes your finished tile height and can throw a whole field out of plane.

On the OEM-versus-aftermarket question: for a Schluter system, matching brand matters more than it does on, say, a fence gate latch. The drainage mat, membrane, and sealing band are designed as one assembly with matched fleece and adhesive chemistry. Substituting a generic uncoupling mat under a Schluter drain forfeits the system’s published performance and can void the assembly warranty on the waterproofing. We install genuine Schluter-compatible components when a system repair calls for it, and we’ll tell you plainly when a repair doesn’t actually need the branded part.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Water staining on ceiling or wall below a roof section. The membrane or drainage plane has a breach, or a termination was never sealed. In Los Angeles this often shows months after the last rain because the water traveled slowly through the deck.
  • Tiles lifting or “tenting” in a line. A common post-Santa Ana wind symptom where the bonding layer under the tile field has lost grip. On a Schluter system it can also mean the mat was installed over a wet or dirty deck and never bonded.
  • Ponding water at flat sections or roof terraces. The KERDI-LINE drain or a low-slope transition isn’t draining. Standing water is the single fastest way to kill a waterproofing assembly in this climate.
  • Visible separation at seams and terminations. Band peeling away from a wall, parapet, or drain flange. This is a sealing failure, and it’s often the first thing to go on an aging install.
  • Crumbling or soft decking under a tile field. The layer below has taken on water for a while. This is the most serious sign and usually turns a targeted repair into a larger scope once we open it up.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what tile and membrane repair work actually costs in Los Angeles, and what the price covers:

  • Targeted membrane and flashing repair: roughly $470 to $2,125. Includes diagnosis, removal of affected tile, re-detail of the waterproofing, and reinstalling matching tile.
  • Tile roof repair (localized): roughly $710 to $2,950 when tile replacement and color matching are involved.
  • Full roof replacement (if the deck or underlayment has failed broadly): roughly $9,440 to $23,600, using GAF or Owens Corning systems where the roofing type calls for it.

The range is driven by how much area is affected, whether the deck is sound, and whether the tile being matched is still in production. We price in writing up front – the number you see is the number you pay – and every job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.

DIY or Call Us?

There are things you can safely check yourself: walk the roof only if it’s genuinely walkable and dry, photograph any staining, note where water is pooling, and pull the Schluter part number off any visible label so you know what system you’re dealing with. Where DIY goes wrong is anywhere water integrity and height tolerance are in play. Removing and reinstalling a tile field over a waterproofing mat without breaking the bond, matching panel thickness, and terminating a membrane correctly are all jobs where a small mistake means water gets in and stays in – often for months before you see it. On a Los Angeles tile roof with a flat terrace or low-slope section, a failed detail can rot decking that costs far more than the original repair.

We answer calls live, 24/7, and we send background-checked, uniformed technicians. Call (888) 427-1733 to schedule a free estimate.

FAQs

How long does a Schluter waterproofing assembly last on a Los Angeles roof? On a properly installed and drained assembly, you can reasonably expect 20 to 30 years before the waterproofing layer itself needs replacing, though tile field and drain details need attention sooner. Los Angeles sun and the dry-to-wet cycles are hard on sealants and terminations, so we inspect those first.

Can it be repaired instead of replaced? Often yes. If the failure is localized to a drain, a termination, or one section of mat, we re-detail that area rather than tear off a whole roof. A soft or crumbling deck under the tile changes that picture and usually widens the scope. Call (888) 427-1733 for an exact quote – estimates are free.

How long does the repair take? A targeted membrane or drain repair is typically done in a day or two depending on access and tile match. A larger replacement runs several days. We give you a written timeline up front, and our technicians have up to 12 years of experience on this kind of work.

How do you source the Schluter part? We order genuine Schluter-compatible components through authorized suppliers once we’ve confirmed the exact part number and panel thickness from your roof. We don’t carry stock and don’t claim to – we match the part to what’s actually installed.

We also install and repair kitchen and bath systems using KraftMaid, Cambria, and Silestone, along with GAF and Owens Corning roofing, Andersen and Pella windows, and more across our seven core service lines.

From foundation to finish line, Groundwork Construction Co. of Los Angeles builds it to last and backs it in writing. We offer a free project estimate and design consult, no-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (888) 427-1733 for your free estimate.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch