Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Los Angeles Owner’s Guide
We install CertainTeed-compatible driveway and paver systems across Los Angeles, and a full paver driveway installation here typically runs $8,260 – $21,240 depending on square footage, base prep, and whether we’re replacing concrete or asphalt. Most owners don’t call because they “have a CertainTeed part.” They call because the driveway looks wrong: sunken joints, wobbly pavers, sand washing into the gutter after a rain, or cracks spidering out from the garage apron. CertainTeed’s hardscape line covers concrete pavers, retaining wall blocks, and the polymeric joint sand that ties the whole surface together, and failures usually trace back to base compaction or joint sand loss rather than the paver itself. Free estimates are available and our line is answered by a live person, 24/7 at (888) 427-1733.
Which CertainTeed Products This Applies To
CertainTeed’s paver and hardscape range includes concrete pavers in various series (tumbled, smooth, and textured finishes), retaining wall systems, step treads, and the polymeric sand that seals paver joints. The part that fails most often isn’t the paver itself, it’s the joint sand and the base layer underneath. To identify what you have, pull up a loose edge paver and measure it (common sizes run 4×8, 6×9, and 12×12 nominal, though thickness varies by series), then check the underside stamp or look for an SKU on the original pallet if you kept one. For joint sand, look at the color and texture: polymer-blend sand feels slightly coarse when dry and holds together when wet, while plain mason sand washes out almost immediately.
The OEM-versus-aftermarket decision matters here. CertainTeed polymer sand is formulated to match their paver joint widths and surface finish, and swapping in a cheaper generic sand can void the paver manufacturer’s surface warranty if a joint failure causes spalling. That said, a quality aftermarket polymeric sand matched to joint width and climate performs just as well on many installations; the key is matching gradation, not brand. We’re an independent installer and not affiliated with CertainTeed, so we source the right product for your system rather than pushing one label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
- Joint sand washing out after rain. Polymer sand breaks down faster than the paver, and once it’s gone the pavers start rocking and settling unevenly.
- Sunken or rocking pavers near the garage apron. This usually signals a base compaction failure underneath, not a paver problem, and no amount of re-sanding fixes it.
- Weeds pushing up through joints. A sign the sand barrier is gone and the base fabric has degraded, common in older Los Angeles driveways after a decade of sun and drought cycling.
- Efflorescence (white chalky haze). Mineral salts wicking to the surface, often after a poorly compacted base traps moisture under the pavers.
- Cracked or spalled paver edges at the driveway entrance. Vehicle loads on a thin or uncompacted base will chip paver corners over time, especially where a heavier vehicle turns in from the street.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Service | Typical Los Angeles Range |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Concrete Driveway Installation | $5,310 – $14,160 |
| Asphalt Driveway Paving | $4,130 – $10,620 |
| Driveway Replacement | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
The range is driven by square footage, base depth (Los Angeles clay soil often needs 4 – 6 inches of compacted base versus the standard 2 – 3), drainage corrections, and whether we’re pulling a permit for work near the street right-of-way. Every estimate is written line-item, so you see the paver cost, base material, joint sand, and labor broken out separately. Work is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.
DIY or Call Us?
You can safely check a few things yourself: walk the driveway and mark rocking pavers, look for sand trails after rain, and note any areas that hold water after a storm. What we don’t recommend is lifting and re-seating pavers on your own, especially over a failed base. A paver driveway that rocks underfoot is a sign the base has shifted, and re-setting a paver on sand over a bad base just buys you a few months before it fails again, often with a sharper edge that’s a trip hazard. Base repair and compaction are where most DIY paver jobs go wrong, and that’s the layer nobody sees. Call us at (888) 427-1733 and we’ll take a look before you spend a weekend on a fix that won’t hold.
FAQs
How long should CertainTeed pavers and joint sand last in Los Angeles? A properly installed paver driveway should hold its joint sand for 5 – 8 years before routine re-sanding, and the pavers themselves often last 25 years or more. Los Angeles’s dry summers and occasional heavy rain cycles speed up sand loss faster than a moderate climate would, so re-sanding every few years is normal maintenance, not a defect. Call (888) 427-1733 for a free inspection and honest timeline.
Can a failing paver driveway be repaired instead of replaced? Yes, if the failure is isolated. A single sunken section, a handful of rocking pavers, or washed-out joint sand can usually be repaired by resetting the affected area and re-sanding the joints. Whole-driveway base failure calls for replacement, and we’ll tell you which you have before quoting. Call (888) 427-1733 for a free estimate.
How long does a paver driveway repair or replacement take? A spot repair and re-sand typically takes a day. A full driveway replacement usually runs 3 – 5 days in Los Angeles, depending on square footage, base depth, and weather. We schedule the work and give you a start and finish date in writing. Call (888) 427-1733 to get your project on the calendar.
How do you source the right CertainTeed paver and joint sand for my driveway? We match thickness, joint width, and finish to your existing paver series, then source the correct product from suppliers carrying that line. If the exact OEM product is discontinued, we identify a compatible equivalent and confirm it with you before ordering. Call (888) 427-1733 for a free estimate and material consult.
Whether you’re re-sanding one section or replacing the whole driveway, we’ll walk it with you, explain what’s failing and why, and give you a line-item quote with no surprises. Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise. Call (888) 427-1733 for a free estimate. We also partner with KraftMaid, Cambria, and Silestone on other areas of your home.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.