A Groundwork company - serving Los Angeles, CA

Owens Corning Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Windows & Doors: The Los Angeles Owner’s Guide

We install and service Owens Corning-compatible windows and doors across Los Angeles, and a full window replacement here typically runs $5,310 to $17,700, while impact-rated units for high-wind and wildfire zones land between $9,440 and $29,500. Most Los Angeles owners discover a failure the same way: a window that won’t latch in a June heat wave, a sliding door that drags across the track, or fog trapped between panes after a winter cold snap. Groundwork Construction Co. of Los Angeles is an independent service provider, not affiliated with Owens Corning, so when we quote a part or a unit we match it to your actual model and specs rather than whatever is easiest to sell.

Call (888) 427-1733

Key takeaways for Los Angeles owners:

  • Installed window replacement runs $5,310 to $17,700; impact-rated glass runs $9,440 to $29,500.
  • Coastal Los Angeles hardware corrodes faster than inland hardware. Salt air is the culprit, not the glass.
  • Fog between panes means the sealed glass unit has failed. The frame may be fine; you likely need the glass unit, not the whole window.
  • Live person, 24/7 answers our line at (888) 427-1733, and estimates are free.

Which Owens Corning Models This Applies To

Owens Corning’s window and door line centers on vinyl-framed replacement windows and patio doors: single-hung, double-hung, casement, slider, and sliding glass door units built for retrofit into existing openings. The parts behind most service calls are the same handful: sash balances, weatherstrip and sweeps, sash locks and tilt latches, glazing (sealed) units, rollers on sliders, and hinge hardware on casement and door panels. Matching a part starts with identification, and the identification is on the unit, not the paperwork. Pull the sash and look for the manufacturer label etched into the top or side of the glass or stamped on the frame; that label carries the model and series code.

When a label is gone, which happens on older Los Angeles installs and any window a previous owner painted over, we measure instead. We take the visible glass dimension, the frame depth, and the sash weight and thickness, then cross-reference the balance rating stamped on the existing hardware. Here’s the OEM-versus-aftermarket decision in plain terms: for a sealed glass unit, an exact-match OEM replacement wins every time because the spacer and low-E coating affect both fit and thermal performance. For mechanical bits like balances, rollers, and weatherstrip, a quality aftermarket equivalent built to the same rating works, costs less, and often outlasts the original. We tell you which is which before you commit to either.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Windows & Doors Is Failing

  • The window won’t stay up, or slams down. The sash balance has lost tension or snapped. On vinyl single-hung and double-hung units, this is the single most common failure, and it’s a $30-to-$90 part on its own that costs real money to install correctly.
  • Fog or condensation trapped between the panes. The argon seal on the insulated glass unit has broken. It shows up most in Los Angeles after a sharp temperature swing, and once the seal is gone the glass will only fog more.
  • Drafts and whistling around the frame, not the glass. Weatherstrip, pile, or sweep has flattened out. In coastal neighborhoods, salt air hardens the foam and felt faster than inland heat alone.
  • The sash lock or tilt latch won’t catch. Wear on the keeper or a shifted sash. This one matters for security, since a window that won’t latch is a window that isn’t locked.
  • The sliding door drags or jumps the track. Rollers have flat-spotted or the track has grit and corrosion in it. We see this constantly on south- and west-facing Los Angeles sliders that take direct afternoon sun.

One safety note up front, because it’s the honest part. Replacing a sealed glass unit or rebalancing a sash is a two-person job on a ladder, and on upper floors or tall casements the fall risk is real. We’d rather tell you that plainly than have you find out on a Saturday afternoon. If your windows sit above the first floor, call us. That’s a safety call, not a sales call.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Los Angeles depends on unit type, glass package, and how many openings you’re doing at once. Here’s what to expect, parts and labor included:

Scope Installed price range
Window replacement (single unit) $5,310 to $17,700
Impact-rated window installation $9,440 to $29,500

What moves the number: glass package (standard versus impact-rated dual pane), frame size and shape, second-story access, and whether the existing opening is plumb and square. What doesn’t change: our pricing. The number you see is the number you pay, laid out line by line before work starts, with no change orders for labor we should have anticipated. Your work is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. From foundation to finish line, one contractor stays accountable for the whole job. Estimates are free, and we’ll pair yours with our standing $1,000 off projects over $10,000 and 0% financing for 18 months.

DIY or Call Us?

Some of this you can safely do yourself. You can check whether the fog is inside the glass or on the surface. You can clean and lubricate a sliding door track and see whether the drag eases. You can test a lock to confirm it’s the latch or the keeper that’s failing. Those checks tell you what you’re dealing with, and they cost nothing.

Where DIY goes wrong: rebalancing a sash on a tall or upper-floor window, and replacing a full sealed glass unit. The first is a fall hazard. The second requires the right specs, and a mis-measured or wrong-spec unit won’t seal, which means you’ve paid for glass and still have the problem. We do neither thing on a ladder we can’t secure. Call us at (888) 427-1733 for a free estimate, and we’ll tell you honestly whether your window needs a part, a glass unit, or a full replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch