Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Los Angeles Owner’s Guide
We install and repair IKO-compatible windows and doors across Los Angeles, and full window replacement typically runs $5,310 – $17,700 installed, while impact-rated units land at $9,440 – $29,500. Door hardware and sash repairs alone cost far less. Groundwork Construction Co. of Los Angeles is an independent service provider, not affiliated with IKO, so we match parts to your actual unit rather than a sales sheet.
Most Los Angeles owners find out something’s wrong the same way: a window that won’t latch flush before a Santa Ana wind event, condensation fogging the glass from the inside, or a sliding door that suddenly drags on its track. IKO builds vinyl and aluminum window and patio-door lines, and the failure points are predictable once you know what you’re looking at. This guide covers what to check, what parts cost, and when to call.
Which IKO Models This Applies To
IKO makes several window and patio-door lines, and the part you need depends entirely on which one is on your wall. Vinyl single-hung and double-hung units, sliding patio doors, and casement windows all use different hardware families. Before you order anything, find the manufacturer label. On IKO units it’s typically etched on the top or side of the sash frame, or printed on a glass spacer. The label carries the model number, the date code, and the glass spec (tempered, laminated, Low-E).
Here’s the compatibility gotcha most Los Angeles homeowners hit: IKO changed roller and latch profiles across production years, so the same nominal door width can take two different roller assemblies. Measure the sash, the track channel depth, and the frame width, not just the opening. On the OEM-versus-aftermarket call: OEM matches exactly but often means a special order and a wait. A quality aftermarket sash lock, roller, or weatherstrip from a supplier who handles vinyl window hardware is usually a direct fit and a fraction of the cost. We tell you which category your part falls into before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
Most of what fails on an IKO window or patio door is hardware or seal, not the whole unit. Watch for these five:
- Fogging between the panes. The insulated glass seal has failed and moisture is inside the sealed unit. A full glass-panel swap fixes it; the frame usually stays.
- A patio door that drags or jumps the track. Worn rollers or a bent track. In Los Angeles, grit blowing in during dry, windy stretches accelerates roller wear.
- Drafts and rattling at the sash. Weatherstrip has compressed or pulled loose. Replacing the seal is cheap; ignoring it lets dust and heat in all summer.
- A lock or latch that won’t catch. The keeper has shifted or the lock mechanism has worn. This one is a security concern, not just a nuisance.
- Water staining at the sill after rain. The sill seal or weep system has failed. Left alone, it rots the framing behind the wall.
Replacement Cost & What’s Included
Window and door work in Los Angeles prices by unit and scope. Here’s what our upfront pricing looks like:
| Service | Installed Price Range (Los Angeles) |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
Hardware-only work (rollers, locks, weatherstrip, sash repair) sits well below the full-replacement range, and we quote it line by line: part cost plus labor, no mystery markup. What drives the number: unit count, whether the frame is replaced or just the sash, standard versus impact-rated glass, and any trim or stucco repair around the opening. Most hardware jobs finish in a single visit. The work is backed by our 730-Day Done Right Promise, and we pull any required permits so the inspection passes. Your quote is fixed, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the checking. Look for the label, measure the sash and track, test the lock, and note whether the glass is fogged or the weatherstrip is flattened. That information tells us exactly which part you need.
Where DIY goes wrong is the install itself. Replacing a sealed glass panel, resetting a patio-door roller with the door still hung, or resealing a sill all risk cracking glass or leaving a leak that rots framing behind the wall. Handling heavy glass and rehanging a door on a track is a two-person job with real injury risk if it slips. That’s the line where a trained technician is worth it. Call (888) 427-1733 and we’ll tell you honestly whether your IKO window or door needs a part or a full unit, and quote it in writing.
FAQs
Expect 15 – 20 years for the window and door frames themselves, and 10 – 15 years for the glass seal and hardware. Los Angeles sun and heat are hard on weatherstrip and rollers, so those wear sooner than the frame does.
Yes, in most cases. A fogged glass panel, a worn roller, or a failing lock can be replaced on its own without touching the frame. We check the glass seal and frame condition first and only recommend a full unit when the frame is warped or rot has set in. Call (888) 427-1733 for a free estimate.
A glass-panel or hardware swap usually takes a single visit of a couple hours. A full window or patio-door replacement takes longer per unit and depends on whether the frame is rebuilt. We give you a clear timeline in the written quote.
We read your unit’s label, confirm the model and glass spec, then match the part to that exact profile. We order OEM when that’s the only true fit and a quality aftermarket equivalent when it’s a direct match and cheaper for you. We tell you which one and why before you approve anything.
Ready to Fix Your IKO Windows & Doors in Los Angeles?
Groundwork Construction Co. of Los Angeles takes the guesswork out of a failing window or door. Bring us your label and a couple of measurements, or let a background-checked technician take a look. We also service KraftMaid, Cambria, and Silestone across our other trades. Live person on the line 24/7, upfront pricing with no surprises, and 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 427-1733 for your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.