Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Windows & Doors: The Los Angeles Owner’s Guide
We install and repair Atlas windows and doors, match the correct hardware and glazing components to your exact model, and most replacement windows in Los Angeles run $5,310 – $17,700 installed, with impact-rated units at $9,440 – $29,500. Atlas products aren’t a single line – the serial tag on the frame tells us which series you have and which parts fit. Call (888) 427-1733 for a free estimate with upfront pricing.
Owners usually discover a failing part in one of three ways: a crank handle that spins without moving the sash, a door lock that no longer lines up with the strike, or moisture fogging between the panes. Here in Los Angeles, the coastal marine layer eats hardware faster than most of the country. We see it most in older homes along the Westside and in the South Bay, where salt air and constant humidity pit the cranks and corrode the weatherstripping on Atlas units long before the glass fails. If your window squeals, sticks, or won’t seal, you’re in the right place.
Which Atlas Models This Applies To
Atlas has been part of the window and door market for years, and the parts that fit a 1990s unit often won’t fit a unit from 2010. The critical step is identifying your series before you buy a single component.
Look for the manufacturer label on the window sash or the door edge. It usually carries a series name and a part number. If the label has faded – common in Los Angeles sun – measure the overall unit: frame width, height, and the visible glass size. Those measurements narrow the field, but they don’t confirm the model. We cross-reference the specs and, when needed, pull the operator or handle to match the spindle size and screw hole spacing. On older Atlas windows, we often find the crank operator is no longer stocked by the manufacturer and a quality aftermarket equivalent is the right call – same function, same fit, and a warranty. On newer or higher-end series, OEM parts make sense for resale and warranty coverage. We’ll tell you honestly which is which for your Los Angeles home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Windows & Doors Is Failing
Not every problem is the glass. Here’s what we hear most often:
- Crank spins freely or feels stripped. The internal gears in the operator have worn out. Common on vinyl and aluminum pop-out windows after years of opening and closing.
- Window won’t stay open or sags closed. The balance or friction hinge has failed. This is a safety concern on larger sashes – a heavy window that drops can hurt a hand or break glass.
- Door lock won’t engage and the strike misses. The multi-point hardware has drifted or the roller has failed. A door that won’t lock properly is a real security risk, not just an annoyance.
- Condensation or fog between the panes. The insulated glass unit (IGU) seal has failed. In Los Angeles, UV exposure and the marine layer accelerate seal degradation – the glass itself is usually fine, but the seal is gone.
- Drafts or whistling at the frame. The weatherstripping and sweep have worn flat, letting in street noise and moisture. Replacing the seals and hairline sweeps restores the tight fit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Los Angeles homeowners actually pay when we swap Atlas parts and full units. All work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
| Service | Installed Price Range |
|---|---|
| Window replacement (standard) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
| Operator / crank / hinge repair | Varies by part and unit count |
| Insulated glass unit (IGU) reseal | Varies by size and series |
| Door lock and hardware replacement | Varies by hardware set |
What drives the range: the series, glass package (tempered, impact-rated, low-E), frame material, and whether we’re replacing the sash only or the whole unit. We quote from the number you see, no change orders, no surprises once the job starts.
DIY or Call Us?
Some checks are safe and smart. You can measure the frame, photograph the manufacturer label, and test the crank by cleaning out grit that’s jamming the mechanism. Cleaning the track and lubricating a sticky operator with silicone spray is fine for nearly any homeowner.
What isn’t safe: struggling with a sash that no longer stays up. A failed balance on a large window can drop with real force – that’s a hand or arm injury waiting to happen, and heavy glass in a bad frame is worse. Don’t force a crank that’s stripped; you’ll crack the sash. And on a door that won’t lock, don’t shim the strike with a screwdriver – it’s a security issue that wants proper hardware. The rest is best left to a professional who can source the right part for your Atlas model. Call (888) 427-1733 – a live person answers, day or night.
FAQs
Vinyl and aluminum frames generally hold up 15 – 20 years, but the moving hardware – cranks, hinges, locks, and seals – often needs attention sooner because of the marine layer and UV. Glass units typically last 10 – 15 years before the seal fails. When it goes, call (888) 427-1733 for a free estimate.
Usually yes. A failed crank, hinge, lock, or a fogged insulated glass unit can often be repaired without touching the frame. We’ll tell you honestly whether a repair makes sense or a full replacement is the better value. Call for a free estimate.
Most hardware swaps and IGU replacements are completed in a single visit, often under two hours for a single unit. Full unit replacements take longer and depend on the series and Number of openings. Call (888) 427-1733 to schedule.
We start with the manufacturer label and cross-reference the series, then measure and match the operator or hardware. When the OEM part is discontinued, we source a quality equivalent that fits. Call for a free estimate – we’ll walk you through what fits your Los Angeles unit.
Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Atlas. We also work with quality brands across every trade, including KraftMaid, Cambria, and Silestone, and we back every project with our 730-Day Done Right Promise and upfront pricing. Our technicians bring up to 12 years of experience to each Los Angeles job.
Ready to fix that sticking window or failing door lock? Call (888) 427-1733 for a free estimate with no-surprise pricing. Requests over $10,000 get $1,000 off, and we offer 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.