Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Roofing: The Los Angeles Owner’s Guide
We install Tamko-compatible roofing systems across Los Angeles, and a full roof replacement runs $9,440 to $23,600 installed here, with most single-component repairs falling between $470 and $2,125. If your Tamko shingles are curling at the edges, shedding granules into your gutters, or letting water past the underlayment after a Santa Ana wind event, the part has usually been failing quietly for a season or two before you notice it inside the house. Most Los Angeles homeowners find out during a ceiling stain after the first real rain, not on a routine inspection.
That gap matters. By the time water shows up on drywall, the failure underneath has had time to spread. We write our estimates in line items, so you can see exactly which materials and which labor are being quoted before you commit to anything. Upfront pricing, no surprises.
Key Takeaways
- Tamko roof work here is priced by the square, the pitch, and how many layers need to come off first.
- Sun and heat drive the failure timeline in Los Angeles, not cold.
- We’re an independent installer, not affiliated with Tamko. We buy their product through our material partners and install it to spec.
- Every project is backed by our 730-Day Done Right Promise.
Which Tamko Models This Applies To
Tamko’s residential lines break into three families that matter for a Los Angeles roof. Their laminated asphalt shingles (the Heritage series, including Heritage Pro and the Heritage Vintage lines) are the most common on this city’s houses and the product most homeowners are asking about. Their metal and synthetic lines show up less often locally, and their low-slope roll and modified bitumen products turn up on porches, detached garages, and the flat sections of older Mid-City homes.
Identifying what you actually have takes two minutes. Look for the Tamko bundle wrapper in the attic or garage, or read the starter course at the eave, where the brand name is often printed on the shingle face. If the wrapper’s gone, measure a single shingle tab: the exposure and width tell you which line it is, and a photo of the profile is usually enough for us to match it.
Here’s the compatibility gotcha most people miss. Tamko’s color names repeat across product lines, so a “weathered wood” from one series won’t match a “weathered wood” from another. If you’re repairing a section rather than replacing the field, bring us a sample tab, not a color name. That one habit saves homeowners from a patch that’s visible from the street. The other decision is OEM versus a quality aftermarket match: on a repair, a matched profile from a comparable manufacturer often works and costs less. On a full replacement, we install to your chosen line’s spec so the system (shingles, underlayment, starter, ridge) stays consistent and the manufacturer warranty isn’t broken by a mismatched piece.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Roofing Is Failing
- Granule loss in gutters and at downspout outlets. That grit is the shingle’s UV shield washing away. Once the asphalt underneath is exposed, the sun starts cooking it directly, and the decline speeds up.
- Curling or clawing at the edges. Shingle edges lifting and cupping usually mean the mat has dried out. In Los Angeles, this is more often heat age than storm damage, though a Santa Ana event can accelerate it fast on a south- or west-facing plane.
- Blisters or soft spots you can press with a thumb. Trapped moisture or a manufacturing defect in the mat shows up as raised bubbles. If the shingle gives under light pressure, the mat underneath is compromised.
- Water stains on ceiling or attic sheathing. This is the late-stage signal. The roof surface has been letting water past the underlayment for a while, and the sheathing has taken on moisture behind it.
- Missing or lifted shingles after a wind event. A single tab lifting is a repair. A field of lifted shingles along a ridge or gable means the fasteners or the sealant strip has failed across that section.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof replacement in Los Angeles runs $9,440 to $23,600 installed, and a targeted roof repair runs $470 to $2,125. Tile work, if your home has a tile plane mixed with asphalt, prices separately at $710 to $2,950 for the repair, and a full metal roof replacement runs $17,700 to $47,200.
What moves the number up or down: roof size in squares, pitch (a steep roof takes longer and needs more fall protection), how many existing layers have to be torn off and disposed of, and whether the sheathing underneath is sound or needs replacement. We quote materials and labor separately, so you can see where the money is going. There’s no hidden change order, and the number you see is the number you pay. Every job we finish carries the 730-Day Done Right Promise, in writing, and calls reach a live person 24/7 if something comes up after the crew leaves.
DIY or Call Us?
You can safely walk your roofline from the ground with binoculars, check the attic for stains or daylight, and clear leaves from gutters from a ladder on stable footing. What you shouldn’t do is climb onto the roof to patch or replace shingles yourself. Roof work in Los Angeles means heights, heat, and a fall risk that sends people to the ER every week, and a poorly sealed patch is worse than no patch because it hides the water path.
We’re happy to come out and tell you whether you need a repair or a replacement, at no charge. If it’s a repair, we’ll say so. If it’s a replacement, you’ll get the line-item number before anyone touches the roof. Call (888) 427-1733 to schedule your free estimate.
FAQs
A well-installed Tamko asphalt shingle roof typically lasts 15 to 25 years in Los Angeles, shorter on south- and west-facing planes where the afternoon sun does the most damage. The number depends heavily on ventilation under the deck and whether the underlayment was installed to spec. Call (888) 427-1733 for an inspection and an honest read on how many years you have left.
Yes, if the failure is localized: a few lifted shingles after a wind event, a single damaged section, or a flashing point that’s leaking. If granules are gone across most of the field, or shingles are brittle and cracking throughout, repairs are a patch on a larger problem and a replacement pencils out better. We’ll tell you which one you’re looking at, with no pressure to upgrade. Call (888) 427-1733 to find out.
Most residential roof replacements here take three to five working days once the crew is on-site, and larger or steeper roofs stretch that to a week. Weather is rarely a scheduling issue in Los Angeles, but inspection and permit timelines can add days before work starts. Call (888) 427-1733 for a schedule after the estimate.
We source Tamko product through our material partners, matched to your roof’s specific line and profile, not just a color name. We bring a sample tab or a photo to the supplier and confirm the match before ordering, so the patch doesn’t look like a patch. We’re an independent installer, not affiliated with Tamko, and we also work with KraftMaid, Cambria, and Silestone on the interiors side. Call (888) 427-1733 to get the right part in the right place.
We’re Groundwork Construction Co. of Los Angeles, and we install and repair Tamko-compatible roofs across this city with a written line-item estimate and the 730-Day Done Right Promise on the work. If your roof is telling you something, call (888) 427-1733 and get a straight answer.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.