Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Los Angeles Owner’s Guide
Kitchen remodeling in Los Angeles with Boral products typically runs $16,520 to $53,100 installed, depending on how much of the room you touch and which Boral series you choose. Boral isn’t a single product here. In a kitchen, the Boral name most often shows up on brick and manufactured stone veneer around a range hood, a backsplash field, or an island face, and on lightweight trim and fascia used to trim out soffits and cabinet surrounds. When that material starts letting go, you usually find out the hard way: a hairline crack that grows along a mortar joint, a corner brick that rocks under your thumb, or efflorescence (the chalky white bloom) bleeding through a backsplash you had finished two summers ago. Our technicians have up to 12 years of experience identifying which Boral line you have and matching replacement material before a small failure turns into water damage behind the wall.
Which Boral Models This Applies To
Boral’s kitchen-relevant lines fall into two buckets: brick veneer (thin-cut and full-bed) and manufactured stone veneer, sold under series names that often appear only on the packaging your installer discarded. That’s the first compatibility gotcha. Boral thin brick is nominal and varies by series, and the depth of a thin-cut unit is not the same as a full-bed unit, so you can’t swap one for the other on an existing backsplash without changing the wall assembly. Measure before you order anything: unit face height, depth, and the mortar joint width your installer used.
Look for a stamp or label on the back of a loose unit or leftover box, and check any warranty paperwork left with the home. If none survives, we identify the profile by face texture and dimensions and match to a current Boral series, or to a quality aftermarket veneer when the original is discontinued. On the OEM-vs-aftermarket question: for a repair hidden behind a hood or under a soffit, a matched aftermarket veneer is often the honest call; for a visible field wall in a high-traffic sightline, we push for the OEM Boral series so the dye lot and texture line up. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
- Hairline cracks along mortar joints. Usually movement or a missing control joint, not the brick itself. Left alone, water gets in and the crack widens through freeze-thaw-free but still wet Los Angeles winters.
- Chalky white bloom on the surface. Efflorescence means moisture is migrating through the veneer. It’s a symptom of a drainage or flashing problem behind the wall, not a cleaning problem.
- Units that rock or sound hollow when tapped. That’s a bond failure between the unit and the scratch coat. One loose brick near a hood is often the first sign of a larger adhesion issue.
- Staining or soft drywall at the base of the wall. Water is getting behind the veneer and finding the interior. This is the expensive one – it means the weather-resistive barrier or weep system has failed.
- Visible caulk lines that keep reopening. Recaulking over a moving joint hides the problem for a season and then fails again. The joint needs to be rebuilt, not patched.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, kitchen remodeling that includes replacing or repairing Boral veneer and trim falls within our standard range of $16,520 to $53,100 for a full kitchen, or $10,620 to $23,600 for a smaller galley or condo kitchen. A backsplash-only replacement runs $945 to $2,950. What drives the range: square footage of veneer, whether the wall assembly behind it needs rebuilding, whether the original series is still available, and how much trim and soffit work is bundled in. We price parts and labor as separate line items so you see exactly what the materials cost and what the install costs – upfront pricing, no surprises, and no change orders once the number is signed.
Every install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We pull the permits Los Angeles requires for structural and veneer work and pass the inspections. Most repair jobs are completed in a single visit; larger rebuilds are scheduled and confirmed in writing before we start.
DIY or Call Us?
An owner can safely do a few things. Tap the field to find hollow spots, photograph any cracks with a tape measure for scale, check under the sink and at the base of the wall for staining, and look for a stamp on a loose unit to help identify the series. That’s the safe list.
Where DIY goes wrong: Boral veneer on an exterior or wet wall depends on a correct weather-resistive barrier, flashing, and weep system behind it. Re-mortaring a loose unit without fixing the water path behind it traps moisture and accelerates the failure you were trying to stop. On interior kitchen walls the stakes are lower, but the same rule holds – the visible unit is the easy part, the assembly behind it is the job. We don’t carry parts on a truck and we don’t claim to; we source the right Boral-compatible material for your specific series. Call (888) 427-1733 and a live person answers, 24/7.
FAQs
Properly installed Boral brick and stone veneer holds up for decades in Los Angeles, but the lifespan depends on the assembly behind it, not the unit. The veneer itself is durable; the failure points are the flashing, the weather barrier, and the mortar joints. In our dry summers and occasional heavy winter rain, a wall with a bad drainage plane can fail in under ten years while the brick looks fine. Call (888) 427-1733 for an inspection – estimates are free.
Often yes, if the failure is isolated – a handful of loose units, a single cracked field, or a joint that needs rebuilding. If water has reached the drywall or the barrier behind the veneer, a partial rebuild is usually the honest fix. We tell you which one you’re looking at after we open it up, not before. Call (888) 427-1733 to schedule a free estimate.
A backsplash-sized repair is typically done in a single visit. A larger field rebuild, especially where the wall assembly needs work, takes longer and we schedule it in writing before we start. Los Angeles permit timelines for structural and veneer work can add days to the front end, and we handle that for you.
We identify your series from a stamp, a leftover unit, or a physical profile match, then order the correct OEM Boral material. If the series is discontinued, we source a quality aftermarket veneer that matches in dimension and texture and tell you plainly where the match won’t be exact. We don’t stock parts locally and we don’t pretend to. Call (888) 427-1733 and we’ll walk you through what we need to find your match.
We also install and service KraftMaid, Cambria, and Silestone in kitchens across Los Angeles, so a single call can cover the whole room. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. Call (888) 427-1733 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.