A Groundwork company - serving Los Angeles, CA

Boral Bathroom Remodeling in Los Angeles, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Bathroom Remodeling: The Los Angeles Owner’s Guide

We install and repair Boral bathroom remodel components across Los Angeles, with full bathroom remodels typically running $10,620 – $33,040 installed and smaller jobs scaled to the $5,900 – $14,160 range. Most Los Angeles homeowners discover a Boral failure the same way: a hairline crack in a cultured marble vanity top that starts catching a fingernail, grout lines at a Boral shower pan that darken and won’t scrub clean, or a shower base that flexes when you step on it because the subfloor underneath has quietly given up. Boral products are solid, but Los Angeles’s hard water, seasonal ground movement, and older plumbing behind the wall all take a toll. When one component fails, the surrounding waterproofing usually has too.

Call (888) 427-1733

Which Boral Models This Applies To

Boral’s bathroom line centers on cultured marble and solid-surface components: vanity tops with integrated bowls, shower pans and shower bases, tub surrounds, and wall panels. The model identification you need is usually a sticker on the underside of the vanity top or the back edge of the shower pan, and it lists a series name and a dimensional code. If the sticker is gone, measure the top or pan edge to edge and depth to the wall; Boral vanity tops commonly run 22 inches deep and 31, 37, 43, or 49 inches wide, and a shower pan that’s 60 by 30 inches is a different part number than a 60 by 32. Matching the dimensions and the drain location (center, left, or right offset) is the compatibility gotcha that trips up DIY replacements more than anything else. On the OEM-versus-aftermarket question, Boral-specific parts give you an exact fit with the existing wall panels and trim, while a quality solid-surface equivalent can save money if you’re replacing the surround and the pan together anyway. We don’t carry stock of Boral parts or keep parts on a truck; we identify what you have, source the correct replacement, and install it. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Boral.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Bathroom Remodeling Is Failing

  • Hairline cracks at the drain or overflow. Cultured marble flexes microscopically against a rigid drain fitting, and Los Angeles’s mineral-heavy water accelerates the etching that turns a hairline into a split.
  • A shower pan that gives underfoot. That softness means the mortar bed or subfloor has lost contact with the pan. Left alone, the pan cracks from underneath, not the top.
  • Discolored or receding grout at wall panel seams. Boral wall panels rely on sealant at the joints. When it fails, moisture wicks behind the panel and the damage is invisible until the drywall behind it softens.
  • Yellow or rust-colored staining at the bowl-to-top seam. On integrated-bowl vanity tops, this points to a failed seal and water sitting where it shouldn’t.
  • Chalking or dull patches on the surface. Solid-surface and cultured marble tops can be sanded and polished back, but if the surface has worn through to the substrate, the part is done.

Replacement Cost & What’s Included

Bathroom remodel pricing in Los Angeles with Boral components falls into a few clear bands. A full bathroom remodel runs $10,620 – $33,040. A small bathroom remodel runs $5,900 – $14,160. A walk-in shower installation runs $5,310 – $14,160. A tub-to-shower conversion runs $4,130 – $11,800. Shower replacement alone runs $3,540 – $10,030. A bathroom vanity installation runs $945 – $3,540. What drives the range is the condition behind the wall: whether the subfloor is sound, whether the existing waterproofing is salvageable, and whether the drain and valve positions have to move. We give you upfront pricing on a written line-item quote, so the number you see is the number you pay. Every Boral installation we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.

Service Installed Range (Los Angeles)
Full bathroom remodel $10,620 – $33,040
Small bathroom remodel $5,900 – $14,160
Walk-in shower installation $5,310 – $14,160
Tub-to-shower conversion $4,130 – $11,800
Shower replacement $3,540 – $10,030
Vanity installation $945 – $3,540
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself: measure the vanity top or shower pan and note the drain position, look for a model sticker underneath, and press on the shower pan to see if it flexes. Past that, the risk climbs fast. Pulling a shower pan means breaking the seal at the walls, and if the waterproofing behind those panels was already compromised, you won’t know until you’re looking at wet framing and a subfloor that needs to be replaced. Setting a new pan right means a level, solid mortar bed and correct slope to the drain; a pan that’s even slightly off flexes, and a flexing pan is a pan that will crack again. A vanity top swap is more forgiving, but you still need to shut off and reconnect the supply lines without stressing old valves. We’re a call away at (888) 427-1733 with a live person, 24/7 – no voicemail – and the first step is a free estimate, not a commitment.

FAQs

How long does a Boral vanity top or shower pan last in Los Angeles? A properly installed Boral cultured marble vanity top typically lasts 15 to 20 years, and a shower pan 10 to 15 years depending on how well the waterproofing behind it holds. Los Angeles’s hard water shortens the surface life of any cultured marble if you don’t wipe it down, and seasonal soil movement in older hillside and slab homes stresses the drain connections first. Call (888) 427-1733 for an exact quote; estimates are free.

Can this part be repaired instead of replaced? Often yes. Surface cracks and dull patches in cultured marble and solid surface can be filled, sanded, and polished back to a matched finish, and a failing seal at a panel seam can be re-done. What can’t be repaired is a cracked shower pan or a top that’s failed down to the substrate; that’s a replacement. We tell you which one you’re looking at before anyone starts. Call (888) 427-1733 for a free estimate.

How long does the swap take once you start? A vanity top replacement is typically a single-visit job. A shower pan replacement runs a few days once you factor in removing the old pan, assessing the subfloor, setting the new bed, and letting waterproofing cure before tile or panels go back up. We don’t promise same-day work on a planned remodel; we give you the real timeline in the written quote. Call (888) 427-1733 to schedule your free estimate.

How do you source the correct Boral part? We identify your model by sticker or by measured dimensions and drain position, confirm compatibility with the existing walls and trim, and order the correct replacement. We don’t claim to stock Boral parts. We also install KraftMaid, Cambria, and Silestone components on the same jobs, so the bathroom comes out consistent. Call (888) 427-1733 for a free estimate and design consult.

Schedule Your Free Estimate

If your Boral bathroom component has cracked, softened, or stopped holding water, the free estimate is the fastest way to find out what you’re actually facing. We’ll inspect the part and what’s behind it, hand you a written line-item quote with upfront pricing, and tell you plainly whether a repair gets you years more or a replacement is the smarter call. Calls are answered by a live person, 24/7, and every installation is backed by our 730-Day Done Right Promise. We’re proud to serve Los Angeles communities with background-checked, uniformed technicians on every project, and the standing offers are simple: a free estimate and design consult, 0% financing for 18 months, and $1,000 off projects over $10,000. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 to get started.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch