Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair Boral driveway and paver systems across Los Angeles, and a full paver driveway typically runs $8,260 – $21,240 installed, with repair and relay work priced far lower depending on what’s failed. The most common call we get isn’t about the pavers themselves: it’s a settled, heaved, or drained-out base underneath them, or a joint that’s stopped locking the field together after a few wet seasons. Most Los Angeles owners find out when a section rocks underfoot after rain, when weeds push up through sand joints, or when the edge course starts walking away from the driveway. Same-day diagnosis is realistic; same-day full replacement is not.
Which Boral Models This Applies To
Boral’s hardscape line covers interlocking pavers, permeable pavers, and segmental retaining wall block under several series names, and the part that fails is almost never the Boral paver face itself. It’s the base course, the bedding sand, the polymeric joint sand, and the edge restraint that hold the Boral units in place. On Boral permeable systems, the open-graded aggregate base and the filter fabric matter even more than the surface, because a clogged or undersized base turns a permeable driveway into a pond. To identify what you’re working with, measure a single paver face (thickness matters most for matching), look for a stamp or mark on the underside of a lifted unit, and check the joint width; Boral fields typically run tight 3 – 5 mm joints, and a base that lets those joints open past that range is the real problem. On matching a replacement part, OEM Boral units are the safe call when you need an exact thickness and color match on a visible driveway. A quality aftermarket paver of the same thickness and a close color can work on a hidden or non-critical area, but color lots shift between production runs, so blending new units into an aged field rarely looks seamless. We’re an independent service provider, not affiliated with Boral, so we match to your existing units rather than sell you a brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Rocking or loose pavers: Individual units move underfoot because the bedding sand has washed out or the base compacted unevenly. In Los Angeles, this shows up first along the driveway apron where runoff concentrates.
- Heaving and trip edges: A paver sitting proud of its neighbors usually means water got under the edge and lifted it, or a tree root is pushing from below. Both get worse every rainy season, and both are a trip hazard on a sloped driveway.
- Weeds and sand loss in the joints: Joint sand that keeps disappearing points to missing polymeric binder or a base that isn’t draining. Once joints open, the interlock that makes a Boral field strong starts to fail unit by unit.
- Edge course spreading: The outer row walking away from the field means the edge restraint is loose, buried too shallow, or was never spiked properly. It’s the most common failure we see on older Los Angeles driveways that meet a soft planting strip.
- Standing water and staining: Puddles that sit for hours after rain signal a base or slope problem, not dirty pavers. Efflorescence (white chalky bloom) on Boral units is usually a moisture symptom, and it’ll keep returning until drainage is corrected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Los Angeles, a full paver driveway installation runs $8,260 – $21,240, a paver patio runs $4,130 – $12,980, and driveway sealing runs $295 – $825. A concrete driveway, if you’re comparing, runs $5,310 – $14,160, and a full driveway replacement runs $5,900 – $16,520. What drives the range is excavation depth, base aggregate, haul-away, edge restraint, and whether you’re matching into an existing Boral field or starting fresh. The number you see is the number you pay: we quote line-item, upfront, with no change orders for scope we’ve already measured. Every install is backed by our 730-Day Done Right Promise, and we pull permits where the city requires them.
DIY or Call Us?
You can safely check a few things yourself: hose the driveway and watch where water pools, lift one loose paver to see whether the sand under it is gone, and check whether the edge course is still tight against its restraint. Where DIY goes wrong is in the base. Relaying pavers over a failed base without re-compacting and re-grading just resets the clock, and a driveway is a heavy-load surface, so a shallow fix shows up again within a season. This isn’t a spring-tension or electrical hazard, but it is a compaction and drainage job that needs plate compactors and proper slope, and getting it wrong means redoing the whole field. Call (888) 427-1733 and a live person answers, day or night, to set up a free estimate.
FAQs
How long do Boral pavers last in Los Angeles? The Boral units themselves commonly hold up 25 – 30+ years when the base and joints are maintained; the base and joint sand are what fail first, often within 5 – 10 years without sealing or re-sanding. Los Angeles’ dry summers and concentrated winter rain put stress on joints and drainage, so maintenance is what determines real lifespan.
Can it be repaired instead of fully replaced? Yes, often. Isolated rocking pavers, a failing edge course, or lost joint sand can usually be lifted, re-based, and re-set without touching the whole driveway. A base that’s failed across the field or a slope that ponds everywhere is the point where full replacement makes more sense. Call (888) 427-1733 for a free estimate and we’ll tell you which one you’re facing.
How long does the swap take? A localized repair (a few pavers, edge, or re-sanding) is often a single visit. A full paver driveway installation in Los Angeles typically takes several days depending on square footage, excavation, and base prep. We give you a schedule upfront so you’re not guessing.
How do you source the part? We measure and match your existing Boral units by thickness, face size, and color, then source OEM Boral where a visible match matters and a spec-matched equivalent where it doesn’t. We don’t carry parts on a truck; every unit is ordered to your job. Call (888) 427-1733 for a free estimate.
Building and repairing driveways across Los Angeles means handling the base, drainage, and finish as one job, not three separate vendors. We do that from foundation to finish line, with upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. We also work with KraftMaid, Cambria, and Silestone on the interior side if a driveway project turns into a bigger one. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.