A Groundwork company - serving Los Angeles, CA

PGT Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Windows & Doors: The Los Angeles Owner’s Guide

We install and service PGT windows and doors across Los Angeles, and the most common fixes – failed glazing seals, worn rollers, broken locks, and rotted sills – typically run $450 to $2,800 as a scoped repair or partial replacement. Full PGT-spec window replacement in Los Angeles usually lands between $5,310 and $17,700 installed, with impact-rated units at the upper end. Many repairs we complete in a single visit. When a PGT unit fails in Los Angeles, owners rarely notice the exact moment it happens. They notice the fog between the panes after a cold night in the hills. They notice the sliding door dragging on its track in a Silver Lake bungalow. They notice a whistling sound at the frame during a Santa Ana wind event. That’s when the call comes in, and that’s exactly what this page is built for.

Call (888) 427-1733

Which PGT Models This Applies To

PGT makes several product lines, and the part that fits one won’t fit another. The most common residential lines we see in Los Angeles homes are WinGuard (the impact-rated aluminum line, everywhere in coastal and hillside properties), PGT Aluminum Series sliders and single-hungs, and the PGT Vinyl Series windows found in mid-century and 1980s-era remodels. PGT Commercial lines exist too, but they’re a smaller share of what we touch in residential Los Angeles.

Before you order anything, find the PGT identification sticker. It’s typically on the top or side of the sash frame or the interior head jamb and shows the series, model, and glass spec. If the sticker is gone, measure the visible glass width and height (not the frame) and photograph the lock, roller, or hinge. That photo plus the measurements is what gets you the right part. Parts across PGT lines often look identical but differ by a few thousandths of an inch, and a roller that’s a hair too wide will bind in the track instead of rolling.

OEM versus aftermarket for PGT: for lock hardware, rollers, and weatherstripping, quality aftermarket equivalents are reliable and cost 30-50% less. For glass units (IGUs), impact-rated glazing, and structural frame components in WinGuard products, we use OEM-spec parts because impact certification and the unit’s rating depend on the exact glass and frame combination. That’s not a sales pitch – it’s a code and insurance reality in Los Angeles. We’re an independent service provider, not affiliated with PGT, and we source parts the same way we’d want them sourced for our own homes.

The information-gain reality for Los Angeles: PGT units here face a specific stress profile. Coastal salt air corrodes aluminum hardware faster than inland installations, and the inland heat cycles in the Valley (San Fernando and San Gabriel) expand and contract frames enough that seals fail years earlier than the manufacturer’s national averages suggest. If your PGT slider is original to a 1990s build in the Valley, plan on rollers and weatherstripping failing before anything else does.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Windows & Doors Is Failing

  • Fog or condensation between the glass panes. The glazing seal has failed and moisture is trapped inside the IGU. It’s cosmetic at first, but a fogged unit loses insulating value and, on impact glass, can compromise the rating.
  • The slider drags, sticks, or jumps the track. Worn rollers or a bent track are usually the cause, and in Los Angeles homes near the coast, corroded aluminum rollers are the culprit more often than the track itself.
  • The lock no longer latches cleanly, or the handle wobbles. Internal lock hardware has worn or the strike has shifted. On impact-rated doors the multipoint lock is a safety component and shouldn’t be left half-caught.
  • You feel air or hear whistling at the frame during Santa Ana winds. Weatherstripping, sweeps, or gaskets have flattened or pulled away. Los Angeles wind events push hard on door perimeters, and a worn sweep lets in dust, water, and noise.
  • Water stains, soft wood, or rot at the sill or frame base. Water has been getting behind the unit. Caulk lines and sill pans fail over time, and once water reaches the rough opening, the frame itself can start to deteriorate.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Pricing depends on what’s failing and whether the unit needs glass, hardware, or a full replacement. Here are the numbers we quote in Los Angeles, parts plus labor, no change-order games:

  • Hardware-only repair (rollers, locks, sweeps, weatherstripping): $450 – $1,200
  • Glazing unit (IGU) replacement, non-impact: $600 – $1,500 per unit
  • Glazing unit replacement, impact-rated PGT WinGuard: $900 – $2,200 per unit
  • Window replacement, standard: $5,310 – $17,700
  • Impact window installation: $9,440 – $29,500

What moves you up the range: impact glass, custom sizes, second-story access, and any frame or sill rot that requires carpentry. What’s included in every quote: the part, the labor, cleanup, and removal of the old unit. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing, no surprises: the number you see is the number you pay.

DIY or Call Us?

You can safely do a few things yourself. Check the PGT sticker for your series and model, photograph the failed hardware, measure the visible glass, and clean the tracks on a dragging slider. Those steps save time and money because they get you the right part on the first call.

Where DIY goes wrong with PGT windows and doors: impact-rated glazing and structural frame components. In Los Angeles, replacing an impact glass unit or any part of a WinGuard frame without the correct OEM-spec assembly can void the impact rating and, depending on your insurance carrier, create a coverage problem after a storm or break-in. Second-story and heavy slider units are also two-person jobs with real injury risk if a sash drops or a frame tweaks out of square. And any repair involving rotted sills or a compromised rough opening is a water-intrusion problem, not a parts swap. Call (888) 427-1733 for a free estimate – we’ll tell you honestly whether it’s a repair, a partial replacement, or something bigger.

FAQs

How long do PGT windows and doors last in Los Angeles? Most PGT aluminum and vinyl units hold up 20 to 30 years, but in Los Angeles the timeline shortens. Coastal homes see hardware corrosion in 10 to 15 years, and inland Valley homes see glazing seal failures in 12 to 20 years because of the heat cycling. Call (888) 427-1733 if your unit is past 15 years and showing symptoms – estimates are free.

Can you repair my PGT window instead of replacing it? Yes, in most cases. Rollers, locks, weatherstripping, sweeps, and glazing units are all repairable, and we recommend repair whenever the frame and sill are sound. We only steer you to full replacement when water damage, structural failure, or an insurance requirement makes repair the more expensive choice long-term. Call (888) 427-1733 for an honest assessment.

How long does the swap take? A hardware repair or single IGU replacement is typically completed in one visit, usually two to four hours. A full window or door replacement takes longer per unit and depends on the frame condition and whether carpentry is needed. We’ll give you a realistic timeline in the written estimate, not a guess on the phone.

How do you source the PGT part? We order directly from PGT and its authorized distribution channels using your model and glass spec, not a generic aftermarket fit. For impact-rated glazing we always use OEM-spec. For hardware, we use OEM or quality aftermarket equivalents and note which one is going in your quote. We don’t stock parts and we don’t carry inventory on a truck – every part is ordered to your specific unit, which is why the identification sticker matters so much.

We also service KraftMaid, Cambria, and Silestone products alongside your PGT windows and doors, so if a larger remodel is in the picture, we handle it under one roof.

If your PGT window or door is failing, call (888) 427-1733 for a free estimate. Live person, 24/7 – no voicemail, no delays. Upfront pricing, the 730-Day Done Right Promise, and background-checked, uniformed technicians on every job. We serve Los Angeles and the surrounding communities, and we answer the phone when you call.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch