Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair PGT driveway and paver systems across Los Angeles, and paver driveway installation here typically runs $8,260 – $21,240 depending on square footage, base prep, and the pattern you choose. Honest note up front: PGT is best known for impact windows and doors, so when a Los Angeles homeowner tells us their “PGT” driveway or paver system has failed, what we usually find is a PGT-branded paver line, a paver supplied under a PGT spec sheet, or a mislabeled product in a resale package. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with PGT.
Owners discover the failure the same way every time. It starts with a hairline crack along a paver course, sand washing out after the first real rain of the season, or a single paver rocking underfoot near the driveway apron. By the time the heaving reaches the garage threshold, the base has usually been moving for a year or more.
Key Takeaways
- Most “PGT paver” calls in Los Angeles turn out to be base failure, not a defective paver.
- Installed paver driveways here run $8,260 – $21,240; sealing alone runs $295 – $825.
- The part that fails first is almost always the bedding sand and base, not the surface unit.
- Every project is covered by our 730-Day Done Right Promise.
Which PGT Models This Applies To
Before we quote anything, we identify what you actually have. PGT’s window and door lines dominate the brand name in Southern California, so paver calls need a paper trail check. Look at three places: the original builder’s spec sheet or final walkthrough binder, any stamp or imprint on the paver underside (flip a loose one), and the color and thickness of the unit itself.
Standard concrete pavers in this market run about 2 3/8 inches thick for driveway use, with patio units often thinner at 1 5/8 to 2 inches. If your driveway pavers measure under 2 inches, they were spec’d for foot traffic, not vehicle loads, and no amount of re-sanding will hold them. That single measurement explains more Los Angeles paver failures than any manufacturing defect.
On the OEM-versus-aftermarket decision: for pavers, there is rarely an OEM “part” to chase. Matching matters on color, texture, thickness, and edge profile so a repair blends into the field. We source from established paver manufacturers and bring samples to the estimate so you can see the match in your own driveway light. If your project involves interior surfaces, we also work with KraftMaid, Cambria, and Silestone, though those are separate scopes from the driveway.
Have the spec sheet or a photo of the paver underside ready when you call. It cuts the identification step to minutes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
These are the five symptoms we see most often on Los Angeles driveways, and what’s actually going on underneath each one.
- Sand washing out of the joints. The joint sand is the locking layer. When it disappears after rain, the pavers start to shift and the problem is water getting under the surface, not the sand itself.
- Pavers rocking or “walking” underfoot. Movement means the bedding layer has lost contact with the base. In Los Angeles, this often traces to clay-heavy soil that swells in the wet season and shrinks hard in summer.
- Heaving or a lip at the garage apron. A raised edge at the apron or a trip hazard at the walkway usually signals base failure or tree-root pressure. Fix the base or the pavers will keep heaving.
- Hairline cracks running in a line. Cracks that follow a straight path across several units point to a base seam or a joint that was never properly compacted, not a bad batch of pavers.
- Standing water and dark, saturated spots. Poor slope or a clogged drainage path. Los Angeles clay soil drains slowly, so a flat spot that holds water will keep softening the base all season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Los Angeles driveways and paver work, based on the ranges we quote. The number you see is the number you pay, and the quote is line-itemed so you can see parts and labor separately.
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
What drives the range: square footage, how much base has to be removed and re-compacted, whether a drainage correction is needed, and the paver pattern and thickness you select. Parts plus labor are itemized, not bundled into one mystery number. Every install is covered by the 730-Day Done Right Promise, and we back the workmanship in writing.
DIY or Call Us?
There are safe things you can check yourself. Pull one loose paver and measure its thickness. Look for the low spot where water pools. Photograph the joint sand loss and the crack pattern. And check your builder packet for the original paver spec. Those four steps help us quote accurately and tell you whether you’re looking at a surface fix or a base rebuild.
Where DIY goes wrong is the base. Tearing out pavers and re-compacting by hand without proper plate compaction and slope control looks fine for one season, then the first heavy rain in Los Angeles finds the low spot and you’re back where you started. Paver failure is a base failure 9 times out of 10, and the base is the part you can’t eyeball. That’s where we come in.
Call (888) 427-1733 and we’ll tell you straight whether you need a re-sand and seal or a full rebuild. Estimates are free, and a live person answers.
FAQs
A properly installed paver driveway lasts 25 to 50 years in this climate, but the joint sand needs re-sanding every few years and sealing every 3 to 5 years to protect the base. Los Angeles’s dry summers and wet winters are hard on joint sand, which is why re-sealing matters more here than in milder climates. Call (888) 427-1733 for a free drainage and base assessment.
Often yes. If the pavers are intact and only the sand and a small section of base have failed, a targeted repair with re-sanding and sealing runs a fraction of full replacement. If the pavers are under 2 inches thick or the base has failed across the whole driveway, repair won’t hold. We’ll tell you which one you have after a walkthrough.
A focused repair and re-seal is usually a single visit, while a full paver driveway replacement in Los Angeles runs several days to a couple of weeks depending on square footage, base depth, and access. We give you a specific timeline in writing with the estimate. Call (888) 427-1733 to schedule your free estimate.
We source from established paver manufacturers and bring physical samples to the estimate so you can confirm color, texture, thickness, and edge profile against your existing driveway in daylight. That same sample matching is why we pull a loose paver up front. Call (888) 427-1733 and we’ll get your estimate scheduled.
If your driveway is failing, don’t wait for the next round of rain to widen the cracks. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free project estimate and design consult. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every project is backed by our 730-Day Done Right Promise. Financing is available at 0% for 18 months, and you’ll get $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.