Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Los Angeles Owner’s Guide
We build CGI-compatible home additions and ADUs in Los Angeles, and installed projects typically run $53,100 – $153,400 for a home addition and $106,200 – $259,600 for a full ADU, with a garage conversion landing in the $35,400 – $94,400 band. We’re an independent contractor, not affiliated with CGI, so we’re matching your spec, not protecting a brand’s margin. Most Los Angeles owners discover the problem the same way: a framing failure behind drywall, a subfloor that flexes underfoot in an added room, or a “finished” ADU that never passed its final inspection because the structural connection was wrong from the start.
That last one is the heart of it. A CGI add-on gone wrong rarely announces itself. It shows up as a crack you patch twice, a door that won’t latch in a new addition, or a permit file that goes quiet. When you’re spending six figures on Los Angeles square footage, you want the failure caught and corrected in writing, not papered over.
Key Takeaways
- Installed home additions in Los Angeles: $53,100 – $153,400. ADUs: $106,200 – $259,600.
- CGI compatibility depends on the series and load spec, not the model year on your plans.
- Structural and permit failures are the expensive ones. Catch them before the drywall goes up.
- Every job we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Which CGI Models This Applies To
CGI compatibility for an addition or ADU hinges on the structural series, not the name on the marketing sheet. Plans and spec packets are labeled by series line and load rating, usually on the title block or the engineering cover sheet. Before we quote anything, we pull that number and match it against the framing and foundation detail the addition actually needs. Wrong series, wrong connection, wrong inspection result.
The identification process is unglamorous but it’s where jobs get saved. We read the plan label and the stamped engineering page, measure the existing structure the addition ties into, and confirm the load path from new roof to existing foundation. If your file is missing the stamped page, that’s a stop sign, not a paperwork nuisance.
Then comes the OEM-versus-aftermarket decision. For CGI-spec structural components, we lean OEM or an engineered equivalent that carries a matching load rating and gets signed off by the local jurisdiction. Cheap substitutions on a load-bearing tie can save four figures up front and cost you an inspection failure or a repair later. We put the spec in writing so you can see exactly what’s going in and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
Failures in CGI additions and ADUs tend to surface slowly, then all at once. Here’s what we look for, and what’s usually underneath each one.
- Doors and windows that won’t sit square in the new room. A racking frame or a foundation that settled unevenly. The door is the messenger, not the problem.
- Hairline cracks that return after patching. Movement in the structural connection between the addition and the original house. Cosmetic fixes hide it for a season, then it’s back.
- Springy or bouncy floors underfoot. Undersized joists or a missing load path in the CGI spec. It feels minor until the subfloor starts to cup.
- Water staining at the tie-in wall or roofline. Flashing detail done wrong where new meets old. In Los Angeles, a single wet winter finds every gap.
- Permit or inspection file that stalled. A structural detail that never matched the approved plan. This is the one that can force a rebuild of finished work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what these projects run in the Los Angeles market, installed, with parts, labor, permits, and inspection baked in:
| Project | Installed Range (Los Angeles) |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: the CGI series and structural spec, foundation conditions on your Los Angeles lot, size and finish level, and how much existing structure we’re tying into. A flat lot in a buildable zone sits near the low end; a hillside lot with grading and retaining work pushes toward the top.
Our pricing is upfront, no surprises – the number you see is the number you pay, written as a line-item quote so you can trace every dollar. And every job we build is covered by the 730-Day Done Right Promise.
DIY or Call Us?
Here’s the honest split. You can safely check for symptoms: walk the floor for bounce, look for returning cracks, check that doors and windows sit square, and pull your permit file to confirm it’s stamped and current. Documenting problems is fair game for any owner.
What you shouldn’t do is try to correct a structural or foundation connection yourself. This isn’t a faucet cartridge or a cabinet hinge – it’s load path and tie-in work where a wrong call can mean a failed inspection, a rebuild, or a safety problem. The stakes are high enough that we say it plainly: bring in a trained crew. A licensed structural correction done once costs far less than finished work torn out and redone.
Call us at (888) 427-1733 and we’ll come look at the failure, tell you what’s actually wrong, and put the fix in writing.
FAQs
How long does a CGI home addition or ADU last in Los Angeles? Built and inspected correctly, these structures hold up for decades – a good addition easily outlives a 30-year horizon, and a properly built ADU is a permanent structure. The lifespan is set by the structural connection and the flashing detail, not the CGI label. Call (888) 427-1733 to schedule a free estimate on a failing or unfinished project.
Can a failed CGI addition or ADU be repaired instead of rebuilt? Often, yes. Structural tie-in corrections, foundation underpinning, and flashing repairs can fix a lot without tearing everything down. It depends on how far the defect has spread and whether it was ever inspected. We’ll tell you honestly which path makes sense. Call (888) 427-1733 for a free assessment.
How long does the correction or build take? A targeted structural repair can run from a few days to a few weeks. A full addition or ADU build takes months, because permits, foundation, framing, and inspection all have to clear in sequence. We give you a real timeline in the written scope, not an optimistic one. Call (888) 427-1733 for a schedule based on your Los Angeles property.
How do you source the right CGI-compatible parts? We match your CGI series and load spec against OEM or an engineered equivalent with a matching rating, confirm it against the approved plan, and put the spec in writing before we order. Nothing goes in that isn’t documented. We also work with brand partners like KraftMaid, Cambria, and Silestone for the finish side of the build. Call (888) 427-1733 to start with a free estimate.
We’ve served our local communities since 2014, and our technicians carry up to 12 years of experience on structural, additions, and ADU work. Calls are answered by a live person 24/7 – no voicemail black holes, no waiting until Monday. Background-checked, uniformed technicians show up on every project, and our full-scope model means one contractor takes you from foundation to finish line.
We’re not affiliated with CGI. We’re the independent Los Angeles crew that reads the spec, matches the part, and builds it to pass inspection and hold up. The 730-Day Done Right Promise covers the work in writing – if it’s not done right, we make it right.
If your CGI addition or ADU is showing symptoms or your permit file has gone quiet, don’t let finished work hide a structural problem. Call (888) 427-1733 for a free estimate and design consult. We’ll inspect the failure, explain what needs to happen, and hand you honest, line-item pricing – no change orders, no surprises. Put the project in our hands and get it built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.