Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Los Angeles Owner’s Guide
CWS paver systems are among the more specified hardscape products in Los Angeles, and replacing or repairing a failed section usually lands between $8,260 and $21,240 for a full paver driveway install, with small repairs running far less. We install and service CWS-compatible pavers across Los Angeles and can typically schedule a free on-site estimate within a few days, with smaller repairs often completed in a single visit.
Los Angeles owners usually find out something’s wrong the same way: a paver lifts at the driveway apron after a February rain, sand starts washing into the storm drain, a hairline crack spreads across three or four units along the wheel path, or the joined edge heaves against the garage slab. That’s when the search starts for the right part, the right price, and someone who knows CWS on sight rather than guessing.
Which CWS Models This Applies To
CWS doesn’t publish a single universal paver, and that’s the first thing to nail down. Their driveway and paver lines come in season-specific series with different thickness profiles (many 60mm structural styles against 80mm heavy-load styles), different joint-sand formulations, and different edge-restraint specs. Mix in a paver from a mismatched series and you get color drift, joint jitter, and premature joint-sand loss within a season or two in our sun.
Here’s how to identify what you have before ordering anything:
- Count and measure the field units. CWS commonly runs 2⅜-inch or 2⅝-inch thickness on residential drives. Measure a clean edge on three separate pavers; if they vary, you’re dealing with mixed stock, not a single series.
- Check the joint sand. CWS specifies polymeric or stabilized sand for most of its paver systems in hot climates. If yours has plain washed sand, that’s often why joints are eroding.
- Look at the base course. A CWS install on a proper Class II base should show 4 to 6 inches of compacted aggregate below the pavers. If you’re seeing a thin bed of sand under the units, base failure is the actual problem, not the surface material.
On the OEM-versus-aftermarket question: for CWS-specific joint sand, edge restraints, and matching field pavers, OEM or series-matched equivalents are worth the small premium because compatibility is exact and color-hold matches. For base aggregate and bedding sand, standard material is fine and often preferred; there’s no meaningful benefit to branded stock there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
In Los Angeles, the combination of dry summers, occasional heavy winter rain, and clay-heavy soils in pockets of the San Fernando Valley and east side makes paver failures predictable. Here are the symptoms we see most often, with the cause behind each:
- Lifting or rocking pavers near the apron or street edge. Usually base settlement from under-compacted subgrade or water running under the restraint at the low corner. The paver isn’t bad; the base under it moved.
- Joint sand washing out every winter. Clogged joints or plain (non-polymeric) sand. Once sand escapes, water gets under the field and the settling accelerates.
- Hairline cracks along wheel paths. Point-load fatigue on a paver series that’s thinner than the traffic it’s carrying. This is where the 60mm-versus-80mm spec matters.
- Color fading or sun-bleaching in exposed sections. UV-exposed pigment breakdown, more aggressive on west-facing driveways in the Valley and coastal-facing drives in Santa Monica and the Westside.
- Heaving or tilting at the edge restraint. Missing or failed edge restraint letting the field spread outward. Every outward inch loosens the joints around it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Service | Los Angeles Price Range |
|---|---|
| Paver driveway installation (full) | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement (full) | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
The range is set by three variables: total square footage, paver series (standard versus heavy-load), and site prep – base replacement, drainage correction, and haul-away. Our quotes are line-itemed: pavers, base material, joint sand, edge restraint, labor, disposal, permits if required, and the install. No change-order surprises once work starts. Every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Permits are pulled where the City of Los Angeles requires them, and inspections passed before we walk off the job.
DIY or Call Us?
You can safely handle the diagnosis yourself. Walk the field after rain and mark areas with standing water. Probe the joint sand with a key to see how deep firm material goes before you hit loose fill. Photograph any lifted paver with a coin alongside for scale. Pull one paver from the failed area and measure its thickness to confirm series. That’s a five-minute inspection – none of it is dangerous.
Where DIY goes sideways: paver repair is more than pressing pavers back in. Rebuilding the base under a three-paver area requires excavating to compacted subgrade, re-compacting in lifts, resetting edge restraint, and matching joint sand to the CWS series. Skip a step and the same pavers will lift again within a season. That’s the difference between a repair and a redo. When the failure is bigger than two or three units, call us. Estimates are free and honest.
FAQs
A properly installed CWS paver driveway on a compacted base typically holds 25 to 30 years in our climate, with occasional joint-sand top-ups and a full re-sand every few years. Install quality matters more than the paver itself; a mis-based install can fail in 5 to 7 years regardless of the brand. If your driveway is showing hesitation at that age band, call us for a free evaluation and honest answer on repair versus replace.
Yes, in most cases. Isolated lifting, joint-sand loss, and edge-restraint failures are all repairable without touching the rest of the field. Full replacement only makes sense when base failure is widespread or the paver series is no longer available for matching. We’ll tell you which one you’re looking at during the estimate, with photos and a line-item quote on both paths.
A discrete repair on a failed section is typically a single-day job, and a full driveway install runs two to four days depending on square footage, base condition, and permitting. We give you a start-to-finish window in the written quote and stick to it. Call (888) 427-1733 to schedule a free estimate.
We work with CWS and its distribution network to match your series, not a generic equivalent, and we confirm thickness, joint-sand formulation, and edge-restraint specs before ordering. If your series has been discontinued, we walk you through the closest current match with color samples in hand. Parts aren’t stocked on our vehicles – they’re sourced per job so you get the exact spec, not a substitute.
Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with CWS. We also service and install across other premium brands including KraftMaid, Cambria, and Silestone, and we handle the full scope – driveway and pavers to kitchen, bathroom, roofing, windows, fencing, and ADU additions – so one team carries the job from foundation to finish line.
If your CWS driveway or pavers aren’t holding up the way they should, we can look at it this week and tell you straight what it needs. All projects are covered by the 730-Day Done Right Promise, every estimate is free and line-itemed, and every technician arrives background-checked and in uniform. Appliances and materials are backed by top-tier manufacturer partners, so the warranty story doesn’t stop at the surface. Call (888) 427-1733 for a free estimate – a live person answers every time, day or night.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.