Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Los Angeles Owner’s Guide
ES Windows-compatible fence installation in Los Angeles runs $4,130 to $10,620 installed for most residential projects, and we schedule it through a free on-site estimate rather than a same-day drop-in. That range covers standard privacy fencing in vinyl and aluminum, with material, tear-out, and haul-away included. Owners usually land on this page after something lets go: gate posts sagging, wind panels shearing at the rail, or a section of fencing that no longer closes square. We install ES Windows systems built to handle Los Angeles conditions, and we’re an independent provider, not affiliated with ES Windows.
Which ES Windows Models This Applies To
ES Windows makes exterior products across several lines, and fence components don’t interchange across all of them. What matters most on a fence install is the post-to-rail connection and the panel spec. A 4-foot panel and a 6-foot panel use different rail depths and post footings, and mixing them is the most common failure we correct in Los Angeles. Before we quote, we check your existing post spacing and the gate hardware model, because an ES Windows gate frame that fits a 36-inch opening won’t swing right on a 42-inch one without a different hinge set.
If you have the label from the original install, that tells us the series and finish. If not, we measure panel height, post spacing, and rail thickness on site and match the equivalent. For ES Windows specifically, OEM replacement components carry the factory finish and exact dimensional match; quality aftermarket rails and pickets cost less and hold up fine in most Los Angeles yards, though the color match on prefinished vinyl won’t be exact. We quote both so you decide with a real number in front of you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
- Posts leaning at the base. Footings that were undersized or set in soil that shifts after heavy winter rain will rack the whole run. Los Angeles dry seasons shrink the ground, then a wet storm loosens it.
- Gate dragging or not latching. A sagging gate usually means the hinge-side post has moved, not the gate itself. Rehanging hardware without fixing the post buys you a few weeks.
- Panels shearing at the rail. Screws backing out or splitting the vinyl at the rail pocket point to panel movement under wind load. It gets worse each Santa Ana wind event.
- Discoloring and chalky surface. In Los Angeles sun, vinyl that’s been up several years will chalk and fade; a dull, white residue is the surface breaking down, not just dirt.
- Wobbly sections you can push by hand. Loose pickets and flexing rails mean fasteners are failing or the post base is compromised. That’s a structural warning, not cosmetic.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, ES Windows-compatible fence installation ranges from $4,130 to $10,620 installed. The low end covers a straightforward run with tear-out on level ground; the high end covers longer linear footage, uneven grades, gate rebuilds, and premium finishes. Our quotes are line-item: material spec, post count and footing depth, tear-out and haul-away, and labor, so you see exactly what each piece costs. No-hassle upfront pricing means the number you sign is the number you pay; we don’t add change orders once work starts. Every install is covered by our 730-Day Done Right Promise, and if it’s not right, we make it right.
DIY or Call Us?
An owner can safely walk the line: measure post spacing, check for lean, and confirm the gate hardware model. Where DIY goes wrong on fence installs is the footing and the panel spec. A post set too shallow or in the wrong soil will rack within a season, and the whole run has to come apart to fix it. Stay clear of digging near buried utility lines too; call 811 before you break ground. If your ES Windows panels look fine but the posts are moving, that’s the fix that saves the material, and it’s one we handle. Call (888) 427-1733 and we’ll come out to measure and price it free.
FAQs
A properly installed vinyl or aluminum fence in Los Angeles typically holds 15 to 20 years before panel replacement, with post footings being the deciding factor. Sun exposure fades the finish sooner in full-sun yards. Call (888) 427-1733 for an exact quote on your run; estimates are free.
Often yes, if the posts are sound and only a few panels or a gate are failing. We replace damaged panels and hardware and leave the rest. If footings or posts have moved, patching won’t hold and we’ll tell you honestly. Call (888) 427-1733 to have it looked at.
Most residential runs of 100 to 150 feet are completed in two to four days, depending on tear-out and grade. Longer runs or tricky grading add time. Call (888) 427-1733 so we can give you a realistic window for your property.
We match the ES Windows spec from your existing labels or on-site measurements and quote OEM-grade and quality aftermarket equivalents side by side. You choose based on fit and budget. Call (888) 427-1733 to schedule your free estimate.
We also work with KraftMaid, Cambria, and Silestone on interior projects across Los Angeles when a remodel comes up alongside your fence.
Ready to price it? The team at Groundwork Construction Co. of Los Angeles stands behind every install with the 730-Day Done Right Promise and transparent pricing. Call (888) 427-1733 for a free estimate on your ES Windows fence installation.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.