Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Los Angeles Owner’s Guide
We handle Therma-Tru-compatible driveway and paver work across Los Angeles, and most projects land between $8,260 and $21,240 installed for a paver driveway, with driveway replacement running $5,900 to $16,520 depending on square footage and base condition. Most failures show up as sunken pavers near the garage apron, a driveway that pools water after winter rain, or joints washing out season after season. Once you spot those signs, the base layer is usually the problem, not the surface you can see. Call (888) 427-1733 for a free estimate; we answer live, 24/7.
Key Takeaways
- Most Los Angeles paver failures trace to base compaction and drainage, not the surface pavers themselves.
- Therma-Tru-compatible thresholds and aprons need exact height matching to your door frame. A quarter-inch off and you get water intrusion at the sill.
- Our technicians have up to 12 years of experience with paver and driveway systems.
- Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Therma-Tru.
Which Therma-Tru Models This Applies To
Driveway and paver work tied to a Therma-Tru entry system comes down to matching the threshold, apron and adjacent hardscape to the specific door line. Therma-Tru’s fiberglass entry systems, steel door lines and their Smooth-Star and Classic-Craft fiberglass doors have different sill heights and frame depths, and the paving surface has to meet that sill at the right elevation for water to shed away from the house.
To identify what you’re working with, find the label inside the door jamb on the hinge side. It carries the model number and series. Take that number plus two measurements: the sill height from the exterior grade and the width of the threshold. Those three data points are what any supplier or installer needs to match compatible pavers, a compatible apron and a proper drainage slope.
The OEM-versus-aftermarket decision matters most for thresholds and door pans. Therma-Tru OEM sill components are built to the exact profile of a given door line, and aftermarket replacements often sit a fraction lower or higher. On a Los Angeles driveway where the paver surface meets the door, that fraction becomes a water path. For the pavers themselves, quality aftermarket systems from vendors like Belgard perform just as well as OEM-branded hardscape as long as the base is built right. We also service KraftMaid, Cambria and Silestone cabinetry and countertop brands, and we apply the same exact-fit standard there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
Here’s what a failing driveway surface shows, and what’s usually causing it underneath.
- Sunken or rocking pavers near the door. The base aggregate has settled or was never compacted in lifts. When the surface moves, the threshold joint opens and rain finds the sill.
- Standing water after a storm. The driveway slope isn’t shedding water away from the house. In Los Angeles, where a single atmospheric river can drop more rain in a day than some months see, poor slope turns a minor grade error into water at the entry.
- Joint sand washing out every season. Polymer joint sand is breaking down because the joints are too wide or the pavers are shifting. Re-sanding without fixing the base just buys you a few months.
- Cracks at the garage apron or threshold transition. Rigid concrete meeting flexible pavers creates a stress point. Without a proper expansion joint and base transition, that crack runs.
- Efflorescence and staining that returns after cleaning. Moisture is wicking up through the base. A surface clean won’t fix it; water is still getting in from below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed paver driveway pricing in Los Angeles runs $8,260 to $21,240, and full driveway replacement runs $5,900 to $16,520. Concrete driveways sit lower at $5,310 to $14,160, asphalt paving at $4,130 to $10,620, and paver patios run $4,130 to $12,980 if your scope includes a patio alongside the driveway. Driveway sealing on its own is $295 to $825 when the surface is sound and only the finish needs refreshing.
| Scope | Installed Range (Los Angeles) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Full driveway replacement | $5,900 – $16,520 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
What drives the number higher: square footage, tear-out and haul-away of the old surface, base depth required by your soil, drainage corrections, and whether the apron and threshold need to be re-set to match the Therma-Tru door. What drives it lower: keeping the existing base if it tests sound, and a simple rectangular layout with no grading work. We quote upfront and the number you see is the number you pay, with no change orders from surprises. All work is covered by our 730-Day Done Right Promise, and we pull permits and pass inspections where the scope requires it.
DIY or Call Us?
An owner can safely check a few things. Look for sunken pavers after rain, run a string line across the driveway to see how far the slope falls away from the house, and check the joint between pavers and the Therma-Tru threshold for any gap wider than a pencil.
Where DIY goes wrong is base preparation and drainage grading. A paver driveway that fails in Los Angeles almost always failed at the base: not enough compacted aggregate, the wrong slope, or no geotextile fabric under the stone. Re-laying pavers over a bad base without correcting the subgrade just costs you a second tear-out. If your base is moving, this isn’t a weekend fix. Call (888) 427-1733 and we’ll tell you straight whether you need a surface correction or a rebuild, and what it costs.
FAQs
A properly built paver driveway should last 25 to 50 years, but that depends on the base, not the pavers. In Los Angeles, sun exposure and dry summers are easy on pavers; the real stress comes from concentrated winter rain during atmospheric river events, which finds any weak spot in base compaction or drainage slope. We build to handle that rain load.
Often, yes. If the pavers themselves are intact and the base is sound, we can re-set the sunken areas, re-sand the joints and re-slope the problem section at a fraction of replacement cost. If the base has failed broadly, spot repairs will keep coming back and replacement is the honest answer. Call (888) 427-1733 for a free estimate that tells you which situation you’re in.
Most paver driveway replacements in Los Angeles take 3 to 7 working days once permits are in hand, including tear-out, base prep and re-installation. That timeline stretches for larger driveways, drainage corrections, and if we need to re-set the apron to match your Therma-Tru threshold. Your written quote includes the schedule before we start.
We identify the door model from the jamb label, measure sill height and threshold width, and match pavers, apron materials and drainage slope to those dimensions. We work with verified brand partners like Belgard for hardscape and match the threshold to the door profile. We don’t carry stock of parts on a truck; the right materials are ordered to your project’s spec. Call (888) 427-1733 for a free estimate.
If your driveway is pooling water at the door, sunken at the apron, or you’re ready to rebuild it with a Therma-Tru entry that actually stays dry, call Groundwork Construction Co. of Los Angeles at (888) 427-1733. We’ll walk the driveway with you, quote it upfront, and back the work with our 730-Day Done Right Promise. Live person, 24/7. Free estimate and design consult on every call.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.