Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Los Angeles Owner’s Guide
We install Therma-Tru-compatible home additions and ADU assemblies across Los Angeles, and full projects in this category run $53,100 to $153,400 depending on footprint, foundation conditions and finish level. An ADU build on the same property typically lands between $106,200 and $259,600. Therma-Tru’s real role in an addition is at the door openings: entry doors, patio sliders and French doors that tie new square footage into the original structure. When those assemblies fail, owners usually notice it the same way. The door dragging on the jamb through a June heat wave. A patio slider that whistles on a windward evening in Sherman Oaks. Water staining the drywall beside a French door after the first real storm of the season. That’s when the parts questions start, and that’s what this page is for.
One note up front: Groundwork Construction Co. of Los Angeles is an independent service provider. We’re not affiliated with Therma-Tru. We work with their products because they hold up, and we know how to source and fit their components correctly.
Key Takeaways
- Therma-Tru door and slider components inside a Los Angeles addition are matched by model line first, then by physical measurement – never by photo alone.
- Full home additions in Los Angeles run $53,100 – $153,400; ADU construction runs $106,200 – $259,600. The door assemblies are a small share of that total, but they’re the part that fails first.
- We quote the whole job as a written line item before work starts, backed by our 730-Day Done Right Promise.
Which Therma-Tru Models This Applies To
Therma-Tru’s lineup splits into a few families that matter for additions. The Fiber-Classic and Smooth-Star lines are fiberglass entry doors, and they show up most often on the exterior walls of new additions because they resist swelling and rot in LA’s dry-then-wet cycle. The Classic-Craft line is the premium fiberglass tier, common on ADU entries where the owner wants a real front-door look at a secondary structure. Patio sliders and hinged patio doors are where the parts confusion usually starts, because a slider sold under one line can share hardware with models from years earlier.
Here’s the compatibility gotcha we run into constantly. Therma-Tru part numbers are tied to model line and production era. A lock or roller set that fits a Smooth-Star entry door installed a decade ago won’t necessarily drop into a current-year Smooth-Star of the same nominal size – the machining on the door slab can differ. Guessing from the brand name alone gets you a part that almost fits, and almost fits is how homeowners end up with a door that leaks air and won’t latch square.
Identify the right part in this order. First, find the label on the door slab’s top edge or hinge jamb – it carries the model and size. Second, measure the opening and the door itself, height, width and thickness, with a tape, because nominal sizes drift by fractions of an inch. Third, photograph the failed component, the hinge, the lock, the roller, the sill, against a ruler. Bring all three to the conversation. That’s how we match OEM parts or a quality aftermarket equivalent without a return trip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
These are the symptoms we get called about most across Los Angeles, and what’s usually behind each one.
- The door drags or catches at the top or strike side. Hinge wear or a foundation that has shifted slightly, which is common in older Los Angeles homes on clay soils. The door itself is rarely the culprit; the assembly has moved.
- A patio slider is hard to open or jumps the track. Rollers flatten and the track fills with grit. In beach-adjacent neighborhoods, salt air accelerates corrosion on the roller hardware.
- Daylight or a draft at the perimeter of a French door. The weatherstripping has compressed or the sill has degraded. This is the one that quietly runs up your cooling bill through a long San Fernando Valley summer.
- Water staining or soft drywall beside an entry or patio door. Failed flashing or a threshold that no longer seals. Catch this early – water intrusion into an addition’s framing is expensive once it spreads.
- Lock or handle no longer lines up or turns smoothly. A worn lockset, or a door that has shifted out of square. Sometimes it’s just the part. Sometimes it’s the frame telling you something.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Door and slider component repair inside a Los Angeles addition usually runs a few hundred dollars for hardware and adjustment, while a full entry or patio door replacement within an addition project is bundled into the larger scope. For reference, the overall projects we handle here price as follows:
| Project | Installed Price Range (Los Angeles) |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
The range is driven by footprint, foundation work, roof tie-in and finish level. Door and window assemblies are a defined line item inside the quote. You see the number before work starts – upfront pricing, no surprises – and the labor and materials are covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Permits get pulled and inspections get passed, which matters in Los Angeles given the city’s ADU and addition review requirements.
DIY or Call Us?
You can safely check a few things yourself: run the door or slider open and closed and note where it rubs, look for daylight or stains at the perimeter, measure the slab and opening, and locate the model label. Those steps cost nothing and help us match the part faster. Where DIY goes wrong is the swap itself. Replacing a hinge set, a slider roller, a sill or a lockset on a door assembly is fiddly work, and a door hung slightly out of square leaks air and water from then on. Misjudging flashing around an addition’s exterior door is worse – that water gets into the wall. If the framing or threshold has moved, it’s not a parts job at all. Call (888) 427-1733 for a free estimate and we’ll tell you straight which one it is. A live person answers, 24/7.
FAQs
A well-installed fiberglass entry door typically holds up 15 to 25 years here, but hardware and weatherstripping wear faster – rollers and seals often need attention in the 8 to 12 year range. LA’s dry summers and wet winters are hard on seals and sills, so we check those first on any addition. Call (888) 427-1733 for an exact quote – estimates are free.
Often yes. Hinges, rollers, locksets and weatherstripping are replaceable on their own, and adjustments can solve a dragging door without a new slab. Repair only stops working when the door or frame itself is warped or water-damaged. We diagnose before we quote either way. Call (888) 427-1733 to schedule your free estimate.
A hardware or weatherstripping swap is usually completed in a single visit. A full entry or patio door replacement within an addition typically takes a day or two depending on the assembly and how the opening ties in. We give you a schedule in writing before work starts. Call (888) 427-1733 for your free estimate.
By model line, size and production era – not by photo or brand name alone. We pull the label data and your measurements, then match an OEM component or a quality aftermarket equivalent that fits correctly. We don’t carry parts on a truck or claim local stock; the part is sourced specifically for your door. Call (888) 427-1733 to get it matched.
Whether you’re planning a full addition, converting a garage or just chasing down a failing patio door inside a recent build, Groundwork Construction Co. of Los Angeles handles it from foundation to finish line. We also install and service KraftMaid, Cambria and Silestone cabinetry and surfaces if your addition includes a kitchen or bath. The number you see is the number you pay, backed in writing by our 730-Day Done Right Promise. Calls are answered by a live person around the clock, and every technician is background-checked and arrives in uniform. To get started, call (888) 427-1733 for your free project estimate and design consult.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.