A Groundwork company - serving Los Angeles, CA

ViewLux Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ViewLux Driveway & Pavers: The Los Angeles Owner’s Guide

ViewLux-compatible driveway and paver installation in Los Angeles runs $8,260 to $21,240 for a full paver driveway, and our technicians can usually assess a failing surface within a single visit. We’re an independent service provider – not affiliated with ViewLux – and we work with ViewLux-compatible materials and repair specifications every week across Los Angeles.

Call (888) 427-1733

Owners tend to discover the problem the same way. A paver lifts slightly after a winter rain, or the sand joints start washing out along the driveway apron, or a hairline crack opens across a slab and widens through the dry season. Sometimes it’s quieter: the surface pools water where it never used to, or the edge restraint has shifted enough that you feel it under the tire every morning. Whether you’re comparing ViewLux against Belgard systems or you already have ViewLux down and something’s gone wrong, this page walks you through compatibility, failure signs, real Los Angeles pricing, and when to call.

Which ViewLux Models This Applies To

ViewLux ships its driveway and paver systems across a few product families – interlocking concrete pavers, permeable paver series, and slab-style units – and the specification sheet under each unit tells you what you need to match. Look for the model designation stamped on the underside or side edge of a lifted paver, and check any install paperwork for the series name and nominal thickness. Most Los Angeles residential ViewLux installations run 60mm to 80mm thick for driveways; patios and walkways often use 40mm to 60mm. Getting the thickness wrong on a driveway is the most common compatibility miss we see, because a 40mm paver that looks identical to an 80mm unit will crack under a loaded SUV within a season.

On OEM versus aftermarket: ViewLux’s own replacement units give you an exact color and dimensional match, which matters on a visible driveway where the new section meets the old. Quality aftermarket equivalents – Belgard, for example – can match function and often cost less, but the color lot and face texture usually differ enough to show. If the damaged area is small and tucked against a garage apron or planter edge, aftermarket is a reasonable call. If it’s mid-driveway and highly visible, stick with the ViewLux match. Either way, buy the full pallet lot for the repair so the color stays consistent – poured-in-place suppliers batch by lot and a second order six months later will read differently in California sun. We also work with KraftMaid, Cambria, and Silestone on interior projects for homeowners who ask, but driveway work stays in hardscape materials.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ViewLux Driveway & Pavers Is Failing

  • Washed-out joints between pavers. Polymeric sand is the usual culprit, and Los Angeles’s dry season followed by winter rain erodes it fast. Once the joints open, water gets under the units and the base starts to move.
  • Paver rocking or a spongy feel underfoot. This means the bedding layer or base has settled or wasn’t compacted to spec. It compounds quickly – one rocking paver churns the sand around it and takes its neighbors with it.
  • Hairline cracks spreading across a slab or paver. In Los Angeles, clay soils that swell in the wet months and shrink in the dry months put constant stress on rigid surfaces. A crack wider than a credit card usually means base failure, not just surface wear.
  • Pooling water on the driveway. Standing water points to a slope or drainage problem – often a settled edge restraint or a clogged channel drain. Left alone, it drives efflorescence and freeze-thaw isn’t our problem here, but algae and staining are.
  • Shifting edge restraint or a gap at the garage apron. The plastic or concrete edge that holds the field in place has let go. Once it moves, the outer row of pavers walks outward and the whole pattern loosens.

One Los Angeles-specific note: homes near the Sepulveda Basin and other low-lying areas see accelerated joint erosion because the water table sits higher and drainage is already stressed. Owners there should check joints every spring.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Los Angeles-area ViewLux-compatible work, with upfront pricing and no surprises:

Service Installed Price Range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

What moves the number: square footage, base prep depth (Los Angeles clay soils often need 6″ to 8″ of compacted base, not the 4″ that shows up in cheap bids), edge restraint, drainage corrections, and whether the old surface needs demolition and haul-off. Our quotes are line-item – pavers, base material, sand, restraint, labor, disposal – so you see exactly where the money goes. Every install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the labor and installation, not just the materials.

DIY or Call Us?

Some checks are safe and smart to do yourself. Walk the driveway and note which units rock, probe joint depth with a screwdriver, watch where water pools after a hose run, and photograph the model stamp on any lifted paver so you know what you’re matching. That’s diagnostic work, and it helps us quote faster.

Where DIY goes wrong: base repair and paver replacement below the surface. Pulling a paver is easy. Rebuilding a compacted, correctly sloped base underneath it, resetting the restraint, and re-sanding joints so the section stays put through a Los Angeles rainy season is where most homeowner repairs fail within a year – usually because the base was under-compacted or the slope reversed. Sealing is a mixed bag too; a bad seal on a damp surface traps moisture and clouds the finish. If water is pooling, the base has settled, or you’re seeing cracks wider than a quarter inch, that’s a call-us situation. Reach us at (888) 427-1733 and we’ll tell you straight whether it’s a repair or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch