Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Los Angeles Owner’s Guide
We install and repair Barrette-branded kitchen components across Los Angeles, and a full Barrette kitchen remodel here typically runs $16,520 – $53,100 installed. Smaller single-line jobs, like re-facing a cabinet run or resetting a failed drawer system, land well under that. Most work is scheduled within days of an approved quote, not weeks, because we plan the parts order before we touch the room.
Owners usually find the failure the same way. A drawer that used to glide now scrapes. A cabinet door that closed flush for years hangs a quarter-inch low. Or the soft-close hinge on the corner cabinet starts snapping shut hard enough to rattle the dishes. These are the small, specific failures that bring people to a parts page, and they’re worth fixing before they turn into a full cabinet replacement in a Los Angeles kitchen where the cabinetry is still structurally sound.
To be clear about who we are: Groundwork Construction Co. of Los Angeles is an independent service provider. We’re not affiliated with Barrette, and we don’t manufacture or warehouse their parts. What we do is source the right replacement, match it to your existing system, and install it under our 730-Day Done Right Promise.
Key Takeaways
- Typical installed Barrette kitchen remodel in Los Angeles: $16,520 – $53,100.
- Cabinet installation alone: $4,720 – $15,340. Countertop installation: $2,360 – $7,670.
- The right part depends on your exact series and the measurement of the existing component, not the color or finish name.
- We don’t stock Barrette parts. We order them matched to your model and install on a scheduled visit.
- Every job is backed by the 730-Day Done Right Promise, upfront pricing, and 0% financing for 18 months.
Which Barrette Models This Applies To
Barrette cabinetry and components show up under several product lines, and the model number is what tells you which replacement fits. The number lives on a label inside the cabinet box, usually on the back of a door or on the interior side panel. If the label is gone, the reliable path is measuring the opening, the drawer box depth, and the door overlay, then matching those to the spec sheet for that series. Color names won’t get you there. A “white shaker” door from one series won’t line up with the hinge bore pattern from another, and that mismatch is the single most common ordering error we see.
The OEM-versus-aftermarket decision matters more with Barrette than with some other brands. Genuine Barrette parts match the finish and the hardware pattern exactly, which matters on visible doors and drawer fronts. For internal hardware like slides and hinges, a quality aftermarket equivalent from a name-brand maker often fits the same bore pattern and performs just as well for less money. We’ll tell you which way we’d go on your specific component, and we’ll put the reasoning in writing on the quote. We also service KraftMaid, Cambria, and Silestone kitchens, so if your Los Angeles home mixes brands across the room, we can handle the whole scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Drawers that stick or scrape along one side. The slide has worn or the drawer box has shifted out of square. In Los Angeles humidity swings, particleboard boxes swell slightly and bind against the slide, which accelerates the wear.
- Doors that no longer sit flush. Usually a hinge plate that’s loosened or a screw that’s stripped its hole in the cabinet stile. Left alone, the door sags further and stresses the other hinges.
- Soft-close that slams. The dampener inside the hinge has failed. This is a hardware failure, not a door problem, and it’s one of the cheapest fixes on this list.
- Cabinet frames separating at the joints. Often from a kitchen that’s seen a leak or a dishwasher steam cycle over many years. The frame is still worth saving, but the joint needs to be re-clamped and re-fastened properly.
- Laminate or veneer lifting at the edges. Common on cabinet fronts near the range and sink, where heat and moisture do the most damage. Catching it early means a component swap instead of a full cabinet replacement.
Replacement Cost & What’s Included
For a Los Angeles kitchen, here’s what the numbers look like for the work that involves Barrette components. These are installed prices, so labor, removal of the old part, and disposal are already in the number.
| Work | Installed Price Range |
|---|---|
| Kitchen remodel (full) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves you up or down the range: the number of components being replaced, whether the cabinet frame is sound enough to reuse, and whether the new part requires a countertop to come out and go back. A single hinge swap sits at the bottom of the cabinet installation range. A run of failing slides plus a few doors plus a new countertop pushes toward the middle. We give you a written line-item quote before any work starts, so the number you see is the number you pay. No change orders after the fact. The 730-Day Done Right Promise covers the workmanship, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is genuinely within reach. You can safely check a hinge by tightening the screws and see if it holds. You can pull a drawer out and look at the slide for visible wear. You can measure the opening and photograph the label inside the cabinet so you have the specs ready when you call.
Where it goes wrong is in the install. Cabinet boxes are heavy, and a door or a drawer front that’s misaligned stresses the whole frame over time. A slide screwed into a stripped hole will fail again within months. And if a cabinet needs to come out to reach the failure behind it, you’re into plumbing, wiring, or countertop work that has to be sequenced correctly. That’s not a job to learn on. Our technicians have up to 12 years of experience with cabinet systems and arrive background-checked and in uniform. Calls are answered by a live person, 24/7. Call (888) 427-1733 and we’ll tell you straight whether you’re looking at a part swap or something bigger.
FAQs
Most hardware, hinges and slides, has a working life of roughly 10 to 15 years before soft-close dampeners and slide bearings start to fail. Cabinet frames themselves hold up much longer when the kitchen is ventilated and the cabinets stay dry. Los Angeles heat and seasonal humidity swings speed up wear on particleboard drawer boxes and on veneer near the range. Call (888) 427-1733 for an exact quote on replacement; estimates are free.
Sometimes yes. A loosened hinge plate or a stripped screw hole can often be repaired with a proper filler and re-fastened, and a slide can occasionally be cleaned and lubricated back to working order. A failed soft-close dampener or a cracked drawer box can’t be repaired and needs replacement. We’ll inspect and tell you which situation you’re in before quoting. Call (888) 427-1733 to schedule a free estimate.
A single component swap, like a set of hinges or one drawer slide, usually takes a couple of hours. A larger cabinet installation or a kitchen remodel in Los Angeles runs longer and depends on the scope. We confirm the timeline in writing on the quote so you can plan around it. No same-day promises on planned work, but most jobs are scheduled within days. Call (888) 427-1733 for a free estimate and a real timeline.
We identify your series from the label inside the cabinet or from measurements if the label is gone, then order the matching component, genuine or quality aftermarket depending on what makes sense for that part. We don’t carry parts on a truck and we don’t warehouse them; we order matched to your model so it fits the first time. Call (888) 427-1733 to start, and we’ll walk you through what we need from your cabinet to place the order.
Get a Straight Answer on Your Barrette Kitchen
Whether you’re looking at one failed hinge or planning a full remodel across a Los Angeles kitchen, we’ll give you upfront pricing, a written quote, and a timeline you can hold us to. The 730-Day Done Right Promise backs every job, and we offer a free project estimate and design consult to start. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for your free estimate. A live person answers, any hour.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.