Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Los Angeles Owner’s Guide
Bathroom remodeling with Ameristar-compatible materials in Los Angeles typically runs $10,620 to $33,040 installed, depending on size, fixture tier, and whether we’re opening walls. We can’t promise same-day work on a room remodel, but we do schedule a free design consult and give you a written, line-item number before anything gets ordered. Most owners land on this page after water damage, a failed shower pan, or a vanity that’s been quietly rotting from the bottom up in a 1920s bungalow where nothing is plumb or level.
Key Takeaways
- Full Ameristar bath remodels in LA run $10,620 – $33,040; small baths run $5,900 – $14,160.
- Early-1900s housing stock in neighborhoods like Echo Park and Silver Lake means off-square walls and cast-iron drains that change the plan.
- We’re an independent contractor. We install Ameristar-compatible products but aren’t affiliated with Ameristar.
- Every job is backed by our 730-Day Done Right Promise, in writing.
Which Ameristar Bathroom Products Fit Your Home
Ameristar makes a wide spread of bath products, from vanity bases and tops to shower surrounds and tub fronts, and the spec sheet is what matters, not the logo. Ameristar vanity tops are commonly cut at 22-inch and 25-inch depths with specific back-splash heights and center-set or widespread faucet drilling, so a 24-inch aftermarket top won’t cover the same footprint. Measure the existing top depth, the faucet spread, and the drain centerline before you order anything.
On the surround side, Ameristar tub and shower panels are usually keyed to specific tub apron dimensions, so a panel made for a 60-inch alcove won’t fit a 58-inch opening without a filler. The OEM-versus-aftermarket call is honestly straightforward: if you need a color match to an existing Ameristar vanity or the same panel profile, an OEM or Ameristar-compatible unit is worth the premium. If it’s a hidden part like a drain assembly or a rough-in valve, a quality equivalent from a name-brand supplier works fine and usually costs half as much. Either way, order by measurement, not by model name.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Bathroom Remodeling Is Failing
- Soft spots at the vanity base or toe kick. Water wicking up from a failed wax ring or a slow supply-line drip. By the time you feel it, the particle board is already gone.
- Caulk lines that keep coming back. A surround or panel that wasn’t set on a proper substrate will flex and crack every caulk bead you lay down.
- Loose or rocking fixture. A vanity screwed to drywall instead of blocking, or a drain assembly that’s working its way loose from a rubber gasket.
- Milky or crazed shower surround. Twenty-plus years of hard Los Angeles water and UV through a frosted window will yellow a panel that can’t be polished back.
- Mildew returning in the same corner. Usually no vapor barrier behind the substrate, not a cleaning problem.
Replacement Cost & What’s Included
Here’s what our Ameristar-compatible bathroom work runs in the Los Angeles market. These are installed ranges, parts and labor included, with upfront pricing and no change orders unless you approve them.
| Scope | Los Angeles Installed Range |
|---|---|
| Bathroom Remodel (full) | $10,620 – $33,040 |
| Small Bathroom Remodel | $5,900 – $14,160 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Vanity Installation | $945 – $3,540 |
What pushes a Los Angeles job toward the top of the range: original cast-iron plumbing, unpermitted past remodels that have to be corrected, tile work on walls that aren’t plumb, and second-floor remodels where waste line work gets expensive fast. On the low end, a straight vanity-and-top swap or a shower replacement keeping the existing valve body and drain location lands near the floor. Every finished project carries the 730-Day Done Right Promise. You also get 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely pull a vanity base to check for water damage, measure your top depth and faucet spread, and photograph the shutoff valves and drain under the cabinet. That’s real information we want.
Where DIY goes wrong: pulling a supply valve with the water main on, cracking a cast-iron drain collar inside a wall, or trying to re-float a floor that’s out of level by more than an inch. In older Los Angeles homes, we’ve seen a simple shower replacement turn into a subfloor rebuild because a 1950s lead pan had been leaking into the joists for years. Electrical work behind a vanity or in a fan circuit is not a homeowner job. Water plus electrical plus weight over your downstairs neighbors is where we come in. Call (888) 427-1733 and we’ll tell you honestly whether it’s a one-day job or a full rebuild.
FAQs
Twenty to thirty years for the fixture itself, but much less for the waterproofing around it. LA’s water is hard, and a shower surround that’s correctly installed on cement board with a proper membrane lasts far longer than one stuck to drywall. Call (888) 427-1733 – the free estimate will tell you what’s underneath.
Sometimes. A single cracked panel can often be swapped without a full remodel, and a loose vanity can be re-anchored with proper blocking. But once the substrate is wet or a drain collar is cracked, patching it just buys you time. We’ll tell you which it is after we look.
A vanity and top replacement is usually a single day. A shower replacement runs two to four days. A full bathroom remodel runs two to four weeks in Los Angeles, mostly depending on tile and plumbing inspection scheduling. Call (888) 427-1733 and we’ll give you a realistic timeline, not a hope.
By measurement and spec sheet, not by brand name. We bring you the exact dimensions we’re matching, then supply OEM or a quality equivalent based on what your budget and the visible vs. hidden use calls for. We don’t carry stock, so every part is ordered to your job. We also work with KraftMaid, Cambria, and Silestone if you want to upgrade while we’re in there.
Get a Free Estimate
If you’re in Los Angeles and your Ameristar bathroom is showing its age, start with a free project estimate and design consult. Our technicians have up to 12 years of experience, we answer the phone live 24/7, and every tech is background-checked and in uniform. Call (888) 427-1733 today.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.