A Groundwork company - serving Los Angeles, CA

Unilock Kitchen Remodeling in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Kitchen Remodeling: The Los Angeles Owner’s Guide

Unilock kitchen remodeling in Los Angeles typically runs $16,520 – $53,100 installed, and most jobs we quote can be scheduled within the same week once materials are confirmed. The work covers cabinetry, countertops, islands, and backsplash tied to your Unilock-compatible components, with a written line-item estimate before anything is ordered. Homeowners usually land on this page after noticing something off: a cabinet door that won’t sit flush, a countertop seam that’s lifting, a drawer that grinds halfway open, or a backsplash edge that’s begun to separate from the wall. That first symptom is your cue to get it looked at before a $200 fix becomes a $2,400 rebuild.

Call (888) 427-1733

Key Takeaways:

  • Full Unilock-compatible kitchen remodels in Los Angeles run $16,520 – $53,100.
  • Smaller kitchens start around $10,620; a full gut-and-rebuild tops out near $53,100.
  • Every project is backed by the 730-Day Done Right Promise and upfront pricing, no surprises.
  • Calls are answered by a live person, 24/7.

Which Unilock Models This Applies To

Unilock’s kitchen-facing product line centers on stone and paver-style surfaces rather than appliances, and it’s most often specified for countertops, islands, and backsplash surfaces where a durable, naturally textured look is wanted. If your home has Unilock surfaces in the kitchen, the first thing to check is the label or stamp on the underside or back edge of each piece. Most Unilock stock carries the series name and finish code there. If the label is gone, measure the thickness and finish sheen – Unilock’s standard kitchen surfaces come in a fairly tight thickness range, and a mismatched replacement will show a visible shadow line at every seam.

The OEM-versus-aftermarket decision matters here. For a partly damaged surface, an aftermarket piece cut to your measurement can match the visual look well and cost less. When you need an exact finish match across a whole run, though, the safer path is a Unilock-spec piece or a documented equivalent finish. We source both, and we’ll tell you plainly which one makes sense for your job rather than defaulting to the more expensive option. We’re an independent service provider, not affiliated with Unilock, so our job is matching your existing product correctly – no obligation to any one line.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Kitchen Remodeling Is Failing

Here’s what we actually see on jobs around Los Angeles, and what’s usually behind each symptom:

  • Visible lifting at a countertop seam. The adhesive or epoxy has started to give, usually because the original install sat on a slightly uneven substrate. Caught early, a reseat is quick; left alone, water gets in and the seam opens wider.
  • Grout lines cracking along the backsplash. Heat cycling from the range plus the dry inland-climate swings in Los Angeles open small cracks over time. Those cracks are harmless at first but let moisture behind the tile and start lifting the bond.
  • A cabinet door that won’t sit flush. The hinge plate has worked loose from the frame, often because the original screw holes were undersized. Fine to fix now; a real headache if the door swings and chips a nearby cabinet edge.
  • A drawer that grinds or sticks halfway. The slide’s plastic race or rollers have worn down. In a 15-plus-year-old kitchen, this is the most common failure and the easiest to swap.
  • Dull or chipped surface finish on stone. Los Angeles hard water, acidic cleaners, and years of sun exposure through a kitchen window etch the finish and make chips more likely. A professional refinish can bring it back; a DIY abrasive pad usually makes it worse.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed prices for Unilock-compatible kitchen work in Los Angeles break down like this:

Service Typical Installed Range
Kitchen Remodel (full) $16,520 – $53,100
Small Kitchen Remodel $10,620 – $23,600
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Backsplash Installation $945 – $2,950
Kitchen Island Installation $3,540 – $11,800

What drives the spread: square footage, whether the existing counters or cabinets can be repaired instead of replaced, the finish and edge style you pick, and whether the plumbing or electrical has to move. We quote parts and labor as separate line items so you can see exactly what the material costs versus what the install costs. Every job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.

DIY or Call Us?

You can safely check a lot of this yourself. Pop open a cabinet and look at the hinge screws – are they tight or stripped? Pull the drawer and look at the slide – worn rollers are obvious. Run a hand along the countertop seam and feel for a lift. Check the backsplash grout for hairline cracks near the range. Those five-minute checks tell you whether you’re looking at a small repair or a larger one.

Where DIY goes wrong: reseating a countertop seam, re-set a backsplash tile so it lines up with the original, or reface a cabinet frame poorly and you’ll crack the finish, chip the edge, or make the seam worse – and then you’re paying for a bigger repair than the one you started with. For anything involving a lifted seam, a chipped surface, or a cabinet that’s out of square, get it looked at. Call (888) 427-1733 and we’ll walk you through what we see and what a fix costs. The estimate is free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch