A Groundwork company - serving Los Angeles, CA

Tremron Bathroom Remodeling in Los Angeles, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Bathroom Remodeling: The Los Angeles Owner’s Guide

Tremron bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 installed, and every project is covered by our 730-Day Done Right Promise. If you’ve landed here, you probably already have Tremron pavers or tile in the mix and something has failed, cracked, or loosened, or a bathroom project stalled because the spec no longer works for the space. The most common picture we see is a bathroom floor or shower surround built with Tremron product where a joint has opened, a tile has gone hollow underfoot, or moisture has worked its way behind the surface. We install Tremron-compatible bathroom work, source matching material honestly, and quote it upfront with no surprises.

Call (888) 427-1733

Which Tremron Models This Applies To

Tremron is best known for concrete pavers and porcelain tile, so a “bathroom” project built on Tremron usually means a floor tile from their porcelain lines or a paver used on an interior/exterior transition. The material identification is where most owners get stuck. The single biggest compatibility gotcha we see in Los Angeles: Tremron tile bodies and pavers from different production runs can vary slightly in thickness and color lot, so grabbing a “matching” box off a shelf for a repair job often produces a visible patch. Check the original packaging, the backstamp on the tile, or measure a full piece at the thickness and face dimensions. On the OEM-versus-aftermarket call: for a straight tile or paver replacement, a quality equivalent in the same face size and thickness is usually fine when the material is no longer produced in your color lot. For anything structural or waterproofing-related behind the tile, we never substitute; the membrane and setting system has to match the substrate. As an independent provider we’re not affiliated with Tremron, but we know the product families well enough to advise honestly. We also handle KraftMaid, Cambria, and Silestone on the fixture and vanity side.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Bathroom Remodeling Is Failing

  • Hollow or loose tile underfoot. The setting bed has debonded, often from moisture intrusion or a substrate that wasn’t properly prepped. You’ll hear a dull ring when you tap it.
  • Cracked tile or grout joints opening. Movement in the subfloor or a missing deflection layer lets the assembly flex. In older Los Angeles homes this is common over wood-framed floors.
  • Discoloration or efflorescence at grout lines. Water is getting behind the surface. Untreated, it reaches the framing or the unit below.
  • Lippage between adjacent tiles. Edges no longer sit flush, usually a sign the tile layer or membrane has shifted. It’s a tripping hazard in a wet area.
  • Persistent musty smell or soft spots. The waterproofing has failed and moisture is trapped. This is the one that escalates fast and the one that most justifies a call rather than a patch.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A full Tremron bathroom remodel in Los Angeles runs $10,620 to $33,040. A smaller bath lands at $5,900 to $14,160, a walk-in shower install is $5,310 to $14,160, and a tub-to-shower conversion is $4,130 to $11,800. What moves the number is tile area, substrate condition, waterproofing scope, and fixture selection. We quote the part or material and the labor as separate lines so you can see exactly what you’re paying for. Every job is covered by the 730-Day Done Right Promise, and we pull permits and pass inspections where the scope requires it.

DIY or Call Us?

You can safely check a few things: tap the floor for hollow spots, look for grout cracks and lippage, check the caulk line at the shower base, and look for any softness in the subfloor near the toilet and shower. What goes wrong for a DIYer is the waterproofing. Tile over a failed or missing membrane looks fine for a year and then fails underneath, and by then the damage is in the framing. Setting and waterproofing systems also have to match the substrate and the tile. We’d rather you check those five things and then call us at (888) 427-1733 so we can give you a straight answer and a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch