A Groundwork company - serving Los Angeles, CA

Tremron Roofing in Los Angeles, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Roofing: The Los Angeles Owner’s Guide

If you have a Tremron roofing product that’s cracked, loose, or letting water in, we install and repair Tremron-compatible roofing across Los Angeles, with most repairs landing between $470 and $2,125 and a full roof replacement running $9,440 to $23,600 depending on square footage and material. Tremron is a Florida-based hardscape and roofing-products manufacturer, and the failures we see most in Los Angeles come from sun and heat rather than cold: tile and stone-composite edges chip and crack, underlayment dries out and tears, and fasteners back out after a few dry seasons. Owners usually spot it on a walk-around after the first winter rain, when a ceiling stain appears in a bedroom or hallway far from the actual break.

Call (888) 427-1733

Which Tremron Models This Applies To

Tremron makes roofing and paver lines under several series names, and the part you need is tied to the specific profile, not the brand alone. The model name is usually stamped on the back of a loose tile or molded into the edge of the panel; if you can’t read it, measure the tile’s length, width, and thickness and photograph the interlock or overlap edge. That measurement is what tells us which compatible replacement fits. On the OEM-versus-aftermarket decision, the honest answer for most Los Angeles homes is that a quality compatible replacement performs the same as the Tremron original when the profile and thickness match, and it’s often easier to source quickly. We don’t claim to stock Tremron parts or carry them on a truck; we match the profile to a compatible part and confirm fit before installation. Once you have the model or measurements, we can confirm compatibility before anyone climbs up. We also service KraftMaid, Cambria, and Silestone products in other areas of the home.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Roofing Is Failing

  • Hairline cracks across a tile or panel. Los Angeles heat cycling expands and contracts the material, and after enough cycles a hairline becomes a full break that lets water through.
  • Chipped or crumbling edges. Edge damage usually means the piece has lost structural integrity at the lap, which is where the next leak starts.
  • Fasteners backing out or rusting. A raised nail head or rust streak signals the fastener has lost its grip; this is a common cause of wind uplift in exposed neighborhoods.
  • Dried, cracked underlayment visible at a lifted piece. Underlayment is the actual water barrier, and in Southern California sun it can degrade years before the tile above it looks worn.
  • Interior water stains or granules in the gutter. Stains after rain or grit collecting below a roof edge mean water is bypassing the surface, and the fix is at the flashing or underlayment, not the tile.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roof repair in Los Angeles runs $470 to $2,125, and a full roof replacement runs $9,440 to $23,600. Tile roof repair specifically runs $710 to $2,950. The range is driven by roof pitch and height, whether it’s a spot repair or a section replacement, whether underlayment or flashing is involved, and how easy the roof is to access and secure a fall-protection setup on. Our quotes are line-item and upfront: you see the parts, labor, disposal, and any underlayment or flashing work before we start, and the number you see is the number you pay. Every replacement and repair is covered by our 730-Day Done Right Promise, and most repairs are completed in a single visit. When the scope is larger, 0% financing for 18 months and $1,000 off projects over $10,000 are available.

DIY or Call Us?

You can safely inspect from the ground with binoculars, check attic-side staining, and photograph any damaged pieces from a ladder’s lower rungs, and that’s where we’d stop most homeowners. Roof work is a fall-risk job. Ladders, pitch, and edges cause serious injuries, and a tile that’s already cracked can break under weight. What goes wrong beyond safety is fit: a compatible part that doesn’t match the interlock profile will leak again, and flashing and underlayment repairs done wrong often show up as a ceiling stain a season later. If you’re not sure what you’re looking at, we’re happy to look. Call (888) 427-1733 and a live person answers any hour, or schedule a free estimate. Groundwork Construction Co. of Los Angeles is an independent service provider and not affiliated with Tremron.

FAQs

How long does Tremron roofing last in Los Angeles? A well-installed Tremron-compatible roof typically lasts 20 to 30 years, but the underlayment underneath often fails first in Southern California heat, sometimes in 10 to 15 years, so have it checked even if the surface looks fine. Call (888) 427-1733 for an exact quote; estimates are free.

Can the damaged piece be repaired instead of replaced? Often yes. A single cracked tile or loose section can usually be repaired rather than replaced, and that’s the call we make on site after inspecting the underlayment and flashing. Call (888) 427-1733 with your model or measurements and we’ll scope it.

How long does the swap or repair take? Most single-tile or small-section repairs are completed in a single visit, usually a few hours. Larger replacements take longer depending on square footage and access. Call (888) 427-1733 to get a timeline for your roof.

How do you source the part if you don’t stock Tremron? We identify the profile from your model stamp or measurements and match it to a compatible replacement, confirming fit before the crew goes up. If you’re not sure which part you have, call (888) 427-1733 and we’ll walk you through identifying it.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch