A Groundwork company - serving Los Angeles, CA

Tremron Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Windows & Doors: The Los Angeles Owner’s Guide

Tremron is far better known in Los Angeles for pavers and hardscape than for windows and doors, so when a door hinge, window operator, or sliding-door roller starts failing, the first surprise for most owners is that a parts counter has ever heard of the brand. We install and service windows and doors in Los Angeles homes, including Tremron-compatible units, and most standard replacements land between $5,310 and $17,700 installed, with custom or impact-rated work climbing from there. When a part fails, the symptom is usually obvious: a sliding patio door that fights you halfway, a crank that spins without moving the sash, a hinge that lets the door drop and scrape the threshold, or a seal that whistles on a windy night in the hills.

Call (888) 427-1733

Which Tremron Models This Applies To

Tremron’s window and door line runs primarily through aluminum and vinyl sliding patio doors, fixed and sliding windows, and hinged exterior door systems, with model and series codes stamped on an identification label tucked inside the head jamb, the top of the sliding panel, or the interior side of the frame. Photograph that label before you order anything. The number on it, not the number your neighbor quotes, is the one the part has to match. Series compatibility is where most owners get burned: rollers and tracks changed profile between production runs, so a hardware kit that fits one Tremron sliding door frame will not seat in another. On the OEM-versus-aftermarket decision, we’re blunt about the trade. Factory parts from Tremron get you an exact fit and a known material spec. A quality aftermarket equivalent (stainless steel rollers, hardened hinges, name-brand operators) can outlast the original part and cost less. In Los Angeles, coastal salt air and inland heat both chew through cheap zinc and mild steel hardware fast, so if you’re replacing once, replace with stainless.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Windows & Doors Is Failing

  • The sliding door drags or jumps the track. Rollers flat-spot and the track fills with grit, so the panel rides crooked. Left alone, the misalignment wears the frame and lifts the door off its bottom guide.
  • The crank spins but the window sash won’t move. The operator’s arm or gearbox has stripped. In Southland heat, the plastic gears inside some operators get brittle and shear after a dozen summers.
  • Hinges sag and the door scrapes the threshold. Screws back out of the frame or the hinge barrel wears. The gap at the top widens while the bottom catches on the sill.
  • Wind or dust blows through the closed unit. Weatherstripping and sweeps flatten and split. This is the most common cause of a draft, and it’s usually the seal, not the whole window or door.
  • Fogging between the panes or condensation that won’t clear. The insulated glass seal has failed and moisture is trapped inside. No part swap fixes that; the sealed unit or sash has to be replaced.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Los Angeles window and door work with us runs $5,310 to $17,700 for standard replacement, and $9,440 to $29,500 for impact-rated units. What pushes you toward the high end: custom sizing on older LA homes with out-of-square openings, tempered or laminated glass, matching existing trim, second-story access, and impact ratings for hillside and canyon properties. Our quotes are upfront and itemized, so the number you see is the number you pay. Parts, labor, disposal, and cleanup are all in the line items. Every install is covered by our 730-Day Done Right Promise, backed in writing. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Call (888) 427-1733 for a free estimate.

DIY or Call Us?

You can safely handle a few things yourself: clean and lubricate the track, tighten visible screws on hinges and handles, and check whether a draft is coming past the weatherstripping. What goes wrong beyond that is real. Sliding door panels are heavy and awkward enough that dropping one is a common injury and a guaranteed cracked frame or shattered glass. Replacing a sealed glass unit means handling a pane that can weigh well over a hundred pounds. Adjusting hinges or operators on a door or window that’s already out of square often makes the problem worse, not better. We recommend trained technicians handle anything involving glass, panel removal, or hinge and operator adjustment. If the part has failed, don’t wrestle with it. Call (888) 427-1733 and we’ll tell you straight whether a repair or a full replacement is the better spend.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch