Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Home Additions & ADU: The Los Angeles Owner’s Guide
If you’re building a home addition or ADU and the finish work involves Tremron hardscape around the structure, our crews install Tremron-compatible paver and hardscape elements for additions and accessory dwelling units across Los Angeles, with typical addition projects landing between $53,100 and $153,400 installed and ADUs running $106,200 to $259,600. We’re an independent installer, not affiliated with Tremron, and we quote parts and labor line by line so you see exactly what the hardscape portion costs.
Owners rarely discover a Tremron failure all at once. It usually starts with a paver edge on the addition’s walkway sitting uneven, or grout lines near the ADU entry opening up after a rainy season. We get called after the second wet winter, when the base under the pavers has shifted and the surface near the new structure is pooling water instead of draining away from the foundation.
Key Takeaways
- Tremron hardscape around additions and ADUs in Los Angeles typically runs $53,100 to $153,400 for a full home addition, $106,200 to $259,600 for an ADU.
- Most failures we see trace back to base compaction and drainage, not the paver itself.
- We don’t carry parts on a truck or stock Tremron material – each project is sourced to spec.
- Every install is backed by the 730-Day Done Right Promise.
Which Tremron Models This Applies To
Tremron makes a wide line of pavers, wall systems, and accessories used around additions and ADUs, and the right piece depends on where it sits. The Mega Olde Towne and Olde Towne lines are the workhorses for walkways and patios; the Bristol and Weston wall systems handle retaining and seat walls; the Glacier and Mega-flo lines come into play for drainage channels near a new foundation.
Identifying your part starts with measuring, not guessing. Pull a loose paver or photograph the wall cap and measure its length, width, and thickness to the nearest eighth of an inch. Thickness matters most – a 60mm paver won’t sit flush against a 80mm base course, and mismatched thickness is the single most common compatibility gotcha we correct on Los Angeles addition projects. Check the score line or stamp on the back where a maker’s mark often sits.
On the OEM-versus-aftermarket question for Tremron: Tremron does not sell direct to homeowners, so anything you find at a big-box store claiming to be Tremron is worth verifying before you buy. If we can’t source the exact discontinued run, we match thickness, color family, and texture from a comparable line and flag the difference in the written quote. KraftMaid, Cambria, and Silestone come into the interior side of the same addition – we source those to spec too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Home Additions & ADU Is Failing
- Pavers rocking or sinking near the ADU entry. The base wasn’t compacted in lifts or the soil beneath wasn’t prepped for Los Angeles’ expansive clay. Movement shows up first at the highest-traffic corner.
- Water pooling against the new foundation. The hardscape was pitched level or back toward the house instead of away at a 2% slope. Standing water at the stem wall is a foundation problem waiting to happen.
- Efflorescence blooming white on the surface. That chalky haze is mineral salt drawn up through the paver, usually from excess moisture trapped under a poorly draining base. It’s cosmetic until it keeps coming back, then it signals a drainage issue.
- Joint sand washing out after rain. Polymer sand that wasn’t installed to spec or was placed wet will rinse away within a season. We re-sand with the correct polymeric product and compact it in.
- Wall caps lifting or tilting on a seat wall. Adhesive failure or a wall system installed without the proper base course. Cap movement on a retaining wall can mean the wall is settling, which we inspect before touching the caps.
Replacement Cost & What’s Included
Installed pricing for the hardscape portion of a Tremron addition or ADU project in Los Angeles depends on square footage, the paver line you choose, base prep, and drainage. Here’s how the full project ranges break down:
| Project | Installed Range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: the addition’s footprint, whether we’re tearing out existing hardscape, how deep the base needs to go on LA’s clay soils, and the paver line specified. Our quotes are line-item, so the Tremron material, base prep, drainage, and labor are each shown. The number you see is the number you pay. Every install carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure the paver or cap, photograph the back stamp, look for pooling water, and note which corners are rocking. Those details help us quote accurately over the phone. Where DIY goes wrong on this work is base prep and grading. Homeowners skip the compacted base in lifts, skip the geotextile fabric, and pitch the surface flat because slope is hard to judge by eye. The result looks fine for a season and then fails. If your addition or ADU is already built, tearing into hardscape around a finished foundation can also undermine drainage and grading that protects the structure.
Call us at (888) 427-1733 and we’ll walk you through what you’re seeing and whether it’s a repair or a reinstall. Calls are answered by a live person, 24/7. Estimates are free, and our technicians have up to 12 years of experience on Tremron and comparable hardscape systems.
FAQs
A properly installed Tremron paver surface lasts 25 to 50 years in Los Angeles, and the paver itself usually outlives the base under it. The failure you’re chasing is almost always base or drainage, not the material. Call (888) 427-1733 to have us assess the base and drainage on your project.
Yes, in many cases. Rocking or settled pavers, washed-out joint sand, and failed wall caps can often be lifted, re-based, and reset without replacing the whole field. If the base is failing across the entire surface, a full reinstall costs less over time than repeated spot fixes. Call (888) 427-1733 for an honest read on which path makes sense.
Spot repairs on a walkway or ADU entry typically take a day, while a full hardscape reinstall around an addition runs several days to a couple of weeks depending on square footage and base depth. Most single-corner repairs we complete in a single visit. Call (888) 427-1733 and we’ll give you a realistic timeline for your Los Angeles project.
We source each part to your project’s actual measurements and spec rather than pulling from stock – we don’t carry Tremron material on a truck or keep it in a warehouse. If the exact line is discontinued, we identify the closest thickness and color match and show you the substitution in writing before you approve. Call (888) 427-1733 to start with a free estimate and design consult.
Ready for a Straight Answer on Your Tremron Project?
Groundwork Construction Co. of Los Angeles handles the full scope of a home addition or ADU – from foundation to finish line – with Tremron hardscape sourced and installed to spec. You get upfront pricing with no surprises, 0% financing for 18 months, $1,000 off projects over $10,000, and a written 730-Day Done Right Promise backing every job. Call (888) 427-1733 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.