Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Los Angeles Owner’s Guide
We install and repair Oldcastle-compatible kitchen remodeling components across Los Angeles, and a full kitchen remodel in this market typically runs $16,520 – $53,100 installed, with smaller-scope projects landing between $10,620 – $23,600. When a homeowner calls us about a kitchen remodel gone wrong, it’s rarely the whole job that’s the problem: it’s one component. Usually a cabinet box that failed at a hinge plate, a countertop seam that opened after a hot season, a backsplash that’s tenting away from the wall, or a drawer slide that’s grinding instead of gliding. Those single failed parts are how most Los Angeles owners end up searching for “Oldcastle kitchen remodeling” in the first place, and it’s exactly the call we’re built for.
Key takeaways
- Most “remodel” calls we get in Los Angeles are really single-part failures: a hinge, a slide, a seam, a panel.
- Installed kitchen remodel pricing in Los Angeles runs $16,520 – $53,100; we quote line by line so you see parts and labor separately.
- We’re an independent contractor, not affiliated with Oldcastle. We source compatible and equivalent parts and install them to spec.
- Every job is backed by our 730-Day Done Right Promise and upfront pricing with no change orders.
Which Oldcastle Models This Applies To
Oldcastle kitchen products show up in Los Angeles homes under several labels and series, and the compatibility question almost always comes down to cabinet construction type, not the brand name on the door. Oldcastle cabinetry and related kitchen components were built for both framed and frameless (full-overlay) boxes, and the hinge platform is the first thing we check. European-style concealed hinges with 32mm cup bore patterns are standard on the frameless lines; older framed boxes often use a different cup offset and screw pattern, and a hinge that “doesn’t fit” is usually the wrong platform, not a defective part.
To identify what you actually have, look for three things: the interior cabinet label or grade stamp (often on the back of a drawer box or inside a door), the bore diameter and cup offset on the existing hinge (measure it with calipers, not a tape), and the door thickness, which on Oldcastle lines typically runs around 3/4 inch. Countertop components are matched by substrate and edge profile, not just color. For the OEM-versus-aftermarket call: on hardware (hinges, slides, shelf pins, levelers) a quality aftermarket equivalent from a brand like Blum or Grass is often better than the original and fully compatible. On anything cosmetic or structural that has to match a profile (door fronts, panels, edge banding, trim), we source the closest true match rather than forcing a part that “sort of” fits.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
Here’s what a failing Oldcastle kitchen component actually looks like, and what’s usually underneath it:
- A door that sags and won’t stay adjusted. The hinge plate screws have stripped out of the cabinet box, or the cup has cracked. Re-tightening works for a week; the fix is a repair plate or a new hinge on solid material.
- Drawers that grind or won’t close flush. The slide’s ball bearings are shot or the track is bent. In Los Angeles homes, heat and humidity swings through the seasons accelerate this on lower-quality slides.
- A countertop seam that opens or looks dark. The seam adhesive has failed or the substrate has swelled from a slow leak. Left alone, the seam keeps widening and the edge chips.
- Backsplash tile or panel lifting off the wall. The thinset or adhesive lost bond, often over a painted or improperly prepped surface. Tenting always spreads; it doesn’t settle back down.
- Cabinet boxes that rack or feel loose. Fasteners have backed out of the wall or the box corners have separated. Catch this early and it’s a repair; ignore it and the whole run has to come out.
Replacement Cost & What’s Included
What you’ll pay depends on scope, and we quote it line by line so parts and labor are never buried in one number. Kitchen remodel ranges in Los Angeles reflect material grade, cabinet count, countertop material, and how much old material has to come out first.
Installed ranges for the parts that most often drive the call:
| Scope | Installed price range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range up: premium cabinet grades, stone countertops, structural changes, and older Los Angeles homes where walls aren’t square. What keeps it down: matching an existing material and replacing a single run rather than the whole kitchen. Every job is covered by the 730-Day Done Right Promise, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. You can measure a hinge cup, look for a label on a drawer box, tighten a slide screw, and confirm whether a backsplash is actually lifting or just caulked badly. That’s honest inspection, and it’ll save you a call if the problem is something small.
Where DIY goes wrong on kitchen components is almost always the same pattern: replacing the part without fixing the cause. A new hinge on stripped-out particleboard will strip out again in weeks. A re-caulked countertop seam hides a slow leak instead of stopping one. Cabinet boxes that have racked need to be re-secured to the wall before anything new goes on them, or the whole run shows the failure again. If a cabinet run backs onto plumbing or an electrical box, or if a countertop or island has to come out, that’s not a weekend job and shouldn’t be treated as one – call (888) 427-1733 and we’ll give you an upfront quote before anyone touches a tool.
FAQs
How long do Oldcastle kitchen components last? A quality hinge runs 10 – 15 years of daily use, drawer slides 8 – 12, and stone countertops decades. Los Angeles heat and seasonal humidity swings shorten the low end on slides and cabinet boxes. Call (888) 427-1733 to assess yours – estimates are free.
Can it be repaired instead of replaced? Often yes. Hinges, slides, and shelf hardware are frequently repairable in a single visit, and a countertop seam can be re-bonded if the substrate is sound. The honest answer depends on whether the cause was fixed – we’ll tell you straight.
How long does a swap take? A single hinge or slide replacement is same-visit, usually under an hour. A cabinet run replacement is typically 1 – 2 days, and a countertop swap depends on fabrication lead time. We’ll give you a real timeline with your quote.
How do you source the part? We identify your Oldcastle platform from the label and measurements, then match to a compatible OEM-equivalent or a quality aftermarket part like Blum or Grass. We don’t claim to carry parts on the truck – we source and install to spec.
Contact Groundwork Construction Co. of Los Angeles
Kitchen Remodeling in Los Angeles, from foundation to finish line. We also install KraftMaid, Cambria, and Silestone for homeowners who want a full replacement. Every project is backed by the 730-Day Done Right Promise, live-person answers 24/7, upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (888) 427-1733 for your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.