Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Bathroom Remodeling: The Los Angeles Owner’s Guide
Bathroom remodeling with Quikrete products in Los Angeles typically runs $10,620 to $33,040 installed, and our independent technicians can usually assess and start within days, not weeks. What Quikrete brings to the job is the substrate and setting side of the work – patching compound, self-leveling underlayment, concrete mix, mortar, grout – the layers that decide whether tile and fixtures stay put for the next 20 years. Homeowners usually discover a problem here slowly: a tile sounds hollow when you knock on it, grout keeps crumbling at the shower floor no matter how many times it’s regrouted, or the floor around the toilet flexes and the flange has cracked the tile above it. In older Los Angeles bathrooms, especially in pre-war homes around Echo Park and Highland Park, those symptoms almost always trace back to what was installed under the tile, not the tile itself. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Quikrete.
Key Takeaways
- Quikrete bathroom work in Los Angeles: $10,620-$33,040 for a full remodel, $5,900-$14,160 for a small bathroom.
- Most failures start in the substrate and setting layers, not the finish materials.
- Substrate and mortar repairs are the one part of bathroom work where the wrong mix in a Los Angeles bathroom cracks within a year or two.
- Every project is covered by our 730-Day Done Right Promise.
Which Quikrete Models This Applies To
Quikrete’s bathroom-relevant line isn’t a single product, so matching the right one matters more than most homeowners expect. The names you’ll see on bags and buckets include Concrete Resurfacer, Self-Leveling Floor Resurfacer, Fast-Setting Concrete, Sand/Topping Mix, Vinyl Concrete Patcher, and the mortar and grout products sold under the Quikrete label. Those are not interchangeable. Self-leveling underlayment pours and flows to a flat plane; topping mix is troweled and can’t span a substrate movement joint; fast-setting concrete is meant for posts and anchors, not floor patching.
To identify what you’re replacing, read the bag or bucket label for the product name first, then the coverage figure and mix ratio, then the printed lot number and date. All three matter. A bag that’s been sitting in a garage through a Los Angeles summer can be unworkable even inside its printed window.
On the OEM-versus-aftermarket question: for Quikrete’s own patching and leveling products, there’s no meaningful aftermarket equivalent – the chemistry is the chemistry. Where you do have a real choice is in the mortar and grout that sit on top, and in the waterproofing membrane underneath. Those are where we compare products line by line with you rather than defaulting to whatever’s on the shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Bathroom Remodeling Is Failing
- Hollow-sounding tile. Tap the floor or shower wall with a screwdriver handle. A dull thud means the thinset never bonded to the substrate – usually because the surface wasn’t primed or the mix skinned over before the tile went down. That’s a tear-out, not a grout fix.
- Crumbling grout at the shower floor and drain. Recurring grout loss around the drain almost always points to a failed or missing waterproofing layer under the tile. Water is getting behind the tile and finding the substrate.
- Cracks that follow a straight line for several feet. Straight-line cracks in a floor patch or self-leveler usually trace a control joint or a substrate seam that the patch wasn’t designed to bridge. Cracks that wander are more likely mix-related – too much water.
- A floor that flexes near the toilet or at the doorway. Movement at the toilet flange or threshold typically means the subfloor or the leveling layer is loose, and the tile above it has been taking the flex. Left alone, the flange cracks and you get a slow leak under the floor.
- Chalky, dusty, easily scratched patch surfaces. That’s a sign the material cured weak, usually from over-wetting or cold application. It’s not cosmetic – a soft layer under tile means the tile above will move and eventually debond.
Replacement Cost & What’s Included
Installed pricing for Quikrete-based bathroom work in Los Angeles depends on how far the rebuild goes. These are the ranges we quote, with no-hassle upfront pricing: the number you see is the number you pay.
| Scope | Installed Range (Los Angeles) |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Shower replacement | $3,540 – $10,030 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Walk-in shower installation | $5,310 – $14,160 |
| Bathroom vanity installation | $945 – $3,540 |
The range is driven by square footage, how much demolition is needed to reach a sound substrate, whether the waterproofing is being brought up to current standards, and finish material choice. What’s included in our numbers: demo, substrate repair and leveling, waterproofing, setting materials, and a written scope. Every project is backed by the 730-Day Done Right Promise – if it isn’t done right, we make it right. Alongside Quikrete, we regularly work with KraftMaid, Cambria, and Silestone on the cabinetry and surfacing side of the room.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: the sound of the tile (tap test), whether the grout around the drain is soft or missing, whether the floor moves when you step near the toilet, and what product label and lot number is on the original bag if the homeowner before you left one. What goes wrong with DIY here is the mix and the substrate prep. Over-watering a Quikrete patching or leveling mix to make it flow is the most common mistake, and it produces a layer that crumbles or cracks within a year or two. Pouring leveler over an unprimed or contaminated floor is the second. Once the floor is wrong, every tile above it will follow. If you’re near a crawl space or pier-and-beam subfloor, the challenge doubles. Calls for a free estimate are answered by a live person, 24/7. Call (888) 427-1733 and we’ll walk you through what needs replacing versus what’s sound.
FAQs
When it’s applied to a properly prepared, primed, structurally sound substrate and mixed to the printed ratio, the material itself holds up for the life of the floor – typically 15 to 25 years. The failures we see in Los Angeles bathrooms are almost never the material – they’re the prep and mix. Call (888) 427-1733 for a free estimate if you suspect the layer under your tile has failed.
Sometimes yes: a localized soft patch or a single hollow tile can be removed, ground, and reset if the surrounding field tests sound and the waterproofing is intact. A full tear-out is the honest answer when the hollow spots are widespread or the waterproofing has failed at the drain. We test the floor before we quote, so you know which one you’re dealing with. Call (888) 427-1733 to schedule the assessment.
A small bathroom is typically a multi-week project, and a full bathroom remodel with substrate work runs longer – production time is one to several weeks, then a short return visit to replace the vanity. We give you the timeline in the written scope before work starts, not halfway through. Call (888) 427-1733 for a free project estimate and design consult.
We source Quikrete products from established regional suppliers, and we match the specific product to the job – not whatever single bag happens to be convenient. Every brand partner we bring in, from Quikrete to KraftMaid, Cambria, and Silestone, has been selected for durability and availability, so what you specify is what you get. Call (888) 427-1733 to talk through options for your room.
Get a Free Estimate on Your Los Angeles Bathroom
Bathroom remodeling decisions are expensive, and the substrate and setting materials are the part homeowners can’t see until they fail. That’s exactly the part worth getting right the first time. Groundwork Construction Co. of Los Angeles brings our independent, background-checked technicians, no-hassle upfront pricing, and 730-Day Done Right Promise to every project. If your budget is the deciding factor, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (888) 427-1733 for a free estimate and design consult. Live person, 24/7.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.